Note:
The item location is abroad. Please note that this may affect delivery conditions, shipping times, and/or the purchasing process.
Currently sold out.
The Tinck Arms Perun X17 is a modern semi-automatic rifle based on the AR15/AR10 - even if the similarity is not immediately apparent - but in the powerful caliber .308 Winchester. The Slovenian manufacturer used many elements of the AR platform for the new weapon so that the shooter can rely on a large accessory market. The trigger, grip, and safety, as well as the barrel, barrel nut, bolt head, firing pin, and gas block with gas tube are compatible with AR15 Mil-Spec parts or AR10/SR25 parts. The magazine release lever and bolt catch lever also correspond to the original but are designed to be ambidextrous from the factory. This allows the use of third-party parts for wear items and is not tied to a single manufacturer.
The major differences are mainly found inside: the most outstanding feature is the hybrid gas system, which uses a standard AR15 gas block - mounted is the excellent adjustable gas block from Superlative Arms - to direct the powder gases through a shortened gas tube to a short stroke piston. This keeps the moving mass low and close to the center of gravity, while simultaneously avoiding the disadvantage of the AR15 and preventing dirt from being blown into the receiver and the shooter's face. The result is a weapon that sits steady during firing and operates very cleanly.
The system spring runs in the receiver and not in a separate buffer tube - allowing the use of folding stocks without modification, and a length-adjustable Masada folding stock is mounted from the factory. Picatinny end plates are also available. The non-reciprocating charging handle can be mounted on either side and is positioned above the system. The bolt carrier completely seals the system and prevents dirt ingress.
An M-LOK handguard rounds off the weapon system, with a long Picatinny rail at 12 o'clock for optics mounting, extended by a short offset rail near the muzzle for mounting accessories that should not obstruct the sight line - target lights, where permitted, or 12 o'clock bipods. The 5/8"x24 muzzle thread is equipped with a muzzle brake.
Please note:
Due to the barrel length of over 40cm, this weapon is approved for sport shooting and does not require a separate BKA notice.
The main features of this semi-auto rifle:
- Tinck Arms Perun X17
- Semi-automatic rifle
- Caliber: .308 Winchester
- Many parts AR15 / AR10 compatible
- Trigger, safety & grip
- Bolt head with small parts & firing pin
- Barrel & barrel nut
- Gas block and gas tube (shortened)
- Magazine - of course
- Hybrid gas system
- Adjustable AR15 gas block combined with short stroke piston
- Clean operation and steady shooting behavior
- M-LOK handguard
- Stepped Picatinny rail at 12 o'clock
- Including folding sights
- Masada folding stock
- Cheek rest and length adjustable
- Charging handle ambidextrous
- Non-reciprocating
- Muzzle thread: 5/8"x24
- Muzzle brake mounted
- Barrel length: 16 inches
Delivery includes:
- 1x Tinck Arms PERUN X17
- 1 piece 10-round magazine
- Delivery in cardboard box
Model:
- Tinck Arms PERUN X-17
Caliber:
- .308 Winchester
Barrel length:
- 16"
Magazine capacity:
- 10 rounds
Sights:
- Folding sight
Application:
- Hunting, SPORT
Weight:
- approx. 3.8kg
Length:
- approx. 71cm / 88-95cm
Height / Width:
- approx. 22cm / 6cm
Tinck Arms is a young company from Slovenia based in Cerkno. The company's goal from the beginning was to improve existing solutions and provide the user with a reliable and high-quality weapon platform. Emphasis is placed on in-house development to implement feedback from shooters as quickly and practically as possible. In the port
In the company's portfolio, various AR15 derivatives are currently available, also inspired by the MR223, and the innovative Perun, which combines proven and available AR15 parts with a hybrid and well-thought-out gas piston system.
Sale only to holders of a purchase permit.
(Show description in original language)
Aktuell ausverkauft.
Die Tinck Arms Perun X17 ist eine moderne Selbstladebüchse auf Basis der AR15/AR10 - auch, wenn man die Ähnlichkeit auf den Ersten Blick nicht sieht - aber im starken Kaliber .308 Winchester. Der slowenische Hersteller benutzte viele Elemente der AR Plattform für die neue Waffe damit der Schütze auf einen großen Zubehörmarkt zurückgreifen kann. Abzug, Griff und Sicherung sowie Lauf, Laufmutter, Verschlusskopf, Schlagbolzen und Gasabnahme mit Gasrohr sind mit AR15 Mil-Spec Teilen bzw. AR10/SR25 Teilen kompatibel. Magazinlösehebel und Verschlussfanghebel entsprechen ebenfalls dem Vorbild aber sind ab Haus beidseitig bedienbar ausgeführt. Dadurch kann man auch bei Verschleißteilen auf Dritthersteller zurückgreifen und ist nicht an einen Hersteller gebunden.
Die großen Unterschiede findet man vor allem innen: das herausragendste Merkmal ist das hybride Gassystem, welches eine Standard AR15 Gasabnahme verwendet - montiert ist die hervorragende verstellbare Gasabnahme von Superlative Arms - um die Pulvergase über ein gekürztes Gasrohr auf einen short stroke piston zu leiten. Dadurch bleibt die bewegende Masse gering und nah am Schwerpunkt, aber gleichzeitig wird der Nachteil der AR15 vermieden und kein Dreck ins Gehäuse und das Gesicht des Schützen geblasen. Das Ergebnis ist eine Waffe die ruhig im Schuss liegt und sehr sauber läuft.
Die Systemfeder läuft im Gehäuse und nicht in einer separaten buffer tube - dadurch ist die Verwendung von Klappschäften ohne Modifikation möglich und ein längenverstellbarer Masada-Klappschaft ist ab Werk montiert. Es sind auch Picatinny-Endplates erhältlich. Der nicht-mitlaufende Ladegriff kann auf beiden Seiten montiert werden und liegt über dem System. Der Verschlussträger schließt das System komplett ab und verhindert das Eindringen von Dreck.
Ein M-LOK Handschutz rundet das Waffensystem ab, eine lange Picatinnyschiene auf 12 Uhr zur Optikmontage wird erweitert durch eine abgesetzte kurze Schiene nahe der Mündung zur Montage von Zubehör, welches die Visierlinie nicht stören soll - Zielleuchten, wo erlaubt, oder 12 Uhr Zweibeine. Das 5/8""x24 Mündungsgewinde ist mit einer Mündungsbremse ausgestattet.
Bitte beachten:
Aufgrund der Lauflänge von über 40cm ist diese Waffe für das sportliche Schießen zugelassen und erfordert keinen separaten BKA-Bescheid
Die wichtigsten Merkmale dieser Semi-Auto Rifle:
Tinck Arms Perun X17
Halbautomatische Büchse
Kaliber: .308 Winchester
viele Teile AR15 / AR10 kompatibel
Abzug, Sicherung & Griff
Verschlusskopf mit Kleinteilen & Schlagbolzen
Lauf & Laufmutter
Gasabnahme und Gasrohr (gekürzt)
Magazin - natürlich
hybrides Gassystem
verstellbare AR15 Gasabnahme kombiniert mit short stroke piston
sauberer Betrieb und ruhiges Schussverhalten
M-LOK Handschutz
abgestufte Picatinnyschiene auf 12 Uhr
inklusive Klappvisierung
Masada Klappschaft
Wangenauflage und Länge verstellbar
Ladegriff beidseitig umbaubar
nicht mitlaufend
Mündungsgewinde: 5/8"x24
Mündungsbremse montiert
Lauflänge: 16 Zoll
Lieferumfang:
1x Tinck Arms PERUN X17
1 Stück 10-Schuss
Lieferung in Kartonbox
Modell:
Tinck Arms PERUN X-17
Kaliber:
.308 Winchester
Lauflänge:
16"
Magazinkapazität:
10 Schuss
Visierung:
Klappvisier
Anwendung:
Jagd, SPORT
Gewicht:
ca. 3,8kg
Länge:
ca. 71cm / 88-95cm
Höhe / Breite:
ca. 22cm / 6cm
Tinck Arms ist eine junge Firma aus Slowenien mit Sitz in Cerkno. Das Ziel der Firma war es von Anfang an, vorhandene Lösungen zu verbessern und dem Benutzer eine zuverlässige und hochwertige Waffenplattform zu bieten. Es wird Wert auf die Entwicklung im eigenen Hause gelegt um Feedback von Schützen schnellstmöglich und praxisnah umsetzen zu können. Im Portfolio der Firma befinden sich aktuell versch. AR15 Derivate, auch angelehnt an die MR223, und die innovative Perun, welche bewährte und verfügbare AR15 Teile mit einem hybriden und durchdachten Gaskolbensystem verbindet.
Abgabe nur an Inhaber einer Erwerbsberechtigung.