TINCK ARMS Perun X-17 with 16"

Currently sold out.

The Tinck Arms Perun X17 is a modern semi-automatic rifle based on the AR15/AR10 - even if the similarity is not immediately apparent - but in the powerful caliber .308 Winchester. The Slovenian manufacturer used many elements of the AR platform for the new weapon so that the shooter can rely on a large accessory market. The trigger, grip, and safety, as well as the barrel, barrel nut, bolt head, firing pin, and gas block with gas tube are compatible with AR15 Mil-Spec parts or AR10/SR25 parts. The magazine release lever and bolt catch lever also correspond to the original but are designed to be ambidextrous from the factory. This allows the use of third-party parts for wear items and is not tied to a single manufacturer.

The major differences are mainly found inside: the most outstanding feature is the hybrid gas system, which uses a standard AR15 gas block - mounted is the excellent adjustable gas block from Superlative Arms - to direct the powder gases through a shortened gas tube to a short stroke piston. This keeps the moving mass low and close to the center of gravity, while simultaneously avoiding the disadvantage of the AR15 and preventing dirt from being blown into the receiver and the shooter's face. The result is a weapon that sits steady during firing and operates very cleanly.

The system spring runs in the receiver and not in a separate buffer tube - allowing the use of folding stocks without modification, and a length-adjustable Masada folding stock is mounted from the factory. Picatinny end plates are also available. The non-reciprocating charging handle can be mounted on either side and is positioned above the system. The bolt carrier completely seals the system and prevents dirt ingress.

An M-LOK handguard rounds off the weapon system, with a long Picatinny rail at 12 o'clock for optics mounting, extended by a short offset rail near the muzzle for mounting accessories that should not obstruct the sight line - target lights, where permitted, or 12 o'clock bipods. The 5/8"x24 muzzle thread is equipped with a muzzle brake.

Please note:
Due to the barrel length of over 40cm, this weapon is approved for sport shooting and does not require a separate BKA notice.

The main features of this semi-auto rifle:

- Tinck Arms Perun X17
- Semi-automatic rifle
- Caliber: .308 Winchester
- Many parts AR15 / AR10 compatible
- Trigger, safety & grip
- Bolt head with small parts & firing pin
- Barrel & barrel nut
- Gas block and gas tube (shortened)
- Magazine - of course

- Hybrid gas system
- Adjustable AR15 gas block combined with short stroke piston
- Clean operation and steady shooting behavior

- M-LOK handguard
- Stepped Picatinny rail at 12 o'clock
- Including folding sights

- Masada folding stock
- Cheek rest and length adjustable

- Charging handle ambidextrous
- Non-reciprocating

- Muzzle thread: 5/8"x24
- Muzzle brake mounted

- Barrel length: 16 inches

Delivery includes:

- 1x Tinck Arms PERUN X17
- 1 piece 10-round magazine
- Delivery in cardboard box

Model:
- Tinck Arms PERUN X-17

Caliber:
- .308 Winchester

Barrel length:
- 16"

Magazine capacity:
- 10 rounds

Sights:
- Folding sight

Application:
- Hunting, SPORT

Weight:
- approx. 3.8kg

Length:
- approx. 71cm / 88-95cm

Height / Width:
- approx. 22cm / 6cm

Tinck Arms is a young company from Slovenia based in Cerkno. The company's goal from the beginning was to improve existing solutions and provide the user with a reliable and high-quality weapon platform. Emphasis is placed on in-house development to implement feedback from shooters as quickly and practically as possible. In the port
In the company's portfolio, various AR15 derivatives are currently available, also inspired by the MR223, and the innovative Perun, which combines proven and available AR15 parts with a hybrid and well-thought-out gas piston system.

Sale only to holders of a purchase permit.