Available from stock with us.
The XPS 2-2 from EOTECH (the little brother of the slightly more expensive model EXPS 2-2) is also among the best holographic sights currently available in terms of quality. In terms of workmanship, quality, and performance, this high-end reflex sight is truly worth its price. The nearly indestructible housing is additionally protected by a protective hood made of hard-anodized, matte black aluminum. The battery compartment is accessible from the side, and the controls are located on the back, facing the shooter. The compact design of the system also takes up very little space on your Picatinny rail, ~67 mm is more than sufficient here.
But it's not just the workmanship that is top-notch at EOTECH - the holographic reticle, consisting of hundreds of small dots, ensures high sharpness and low glare. The 2-point reticle is specifically calibrated with hold points for the caliber .223. In addition to the 1 MOA center point, there is another 1 MOA point below as a hold point for ~460m. The 68 MOA large circle primarily serves for quick target acquisition during hunting or dynamic disciplines (30 cm at 50m). This ballistic reticle was developed for 5.56 NATO/.223 cal with 62 g M855 FMJ at approximately 2,680 fps with a 14.5-inch barrel. When using different ammunition or barrel lengths, the reticle points may vary slightly.
Differences to the EXPS model: Brightness control at the back of the device (on EXPS it is on the side, making it easier to operate in position), On EXPS: Quick mounting system - XPS with Torx screw for fixation. The height of the optical axis is approximately 38mm for the 55x and XPS models, and about 45mm for the EXPS models.
In short - simply brilliant and definitely worth the money!
What are the differences between the variants?
XPS - the base
- no quick release
- controls are located at the back (towards the shooter)
- height of the optical axis approx. 38mm
EXPS - the tactical
- quick release
- controls are located on the side (left)
- height of the optical axis approx. 45mm
2 - the civilian
- no night vision mode
3 - the operator
- night vision mode
What are the different reticles?
-0
- the standard reticle
- 1 MOA point with 65 MOA circle
-1
- 1 MOA point, ONLY the point
-2
- 1 MOA point with 65 MOA circle
- another 1 MOA point below the first, for 500yds (at 50/200yds zero)
-4
- 1 MOA point with 65 MOA circle
- three additional 1 MOA points below the first, for 400, 500 & 600yds (at 50/200yds zero)
This results in, for example:
XPS2-0
- without quick mount
- rear controls
- without night vision mode
- circle-dot reticle
EXPS3-4
- quick mount
- side controls
- with night vision mode
- circle-dot reticle with 3 additional hold points
The night vision mode adjusts the illuminated reticle down so that there is no glare from night vision devices (NVG-compatible).
Reticle:
Highlights:
- 1x magnification
- Parallax-free
- Illuminated reticle: ballistic hold points for caliber .223 (up to 500m)
- 2 MOA red dots (center ~45-180m + 1 hold point ~460m)
- 68 MOA ring (30cm / 100m)
- Unique illuminated ring structure made of many small dots, resulting in low dispersion
- 20 brightness levels for very fine adjustment in daylight
- Programmable shutdown (automatic)
- Not compatible with night vision devices
- Includes Picatinny / Weaver mount
- Waterproof up to 3m diving depth
- Fog-free due to hermetic sealing of the housing
- Protective hood made of hard-anodized, matte black aluminum
- Shock-resistant housing made from a block of aircraft aluminum
- Remaining energy warning
Scope of delivery:
EOTech XPS2-2™
Quick start guide
The manual in German can be found I
Note on products from EOTECH:
The packaging of the products will be opened upon arrival in Germany to verify the serial numbers with the manufacturer's specifications, meaning that any "seal stickers" may no longer be intact. The battery is already installed from the factory. Due to these procedures, it may be possible that mounting traces are visible. This is completely normal. This is NOT B-goods!
Technical data:
- Magnification: 1x
- Eye relief in mm: unlimited
- Reticle: 2 x 1 MOA dots + 68 MOA ring
- Illuminated reticle: yes (red)
- Brightness levels: 20x
- Reticle adjustment / click: 0.5 MOA (100 m)
- Max. reticle adjustment height: ± 40 MOA
- Max. reticle adjustment side: ± 40 MOA
- Temperature range: -40°C to +60°C
- Size in mm: 95 x 61 x 61 mm (l x w x h)
- Weight in g: 250 g
- Battery: yes, CR123
EOTECH produces professional optics that are trusted by leading professionals worldwide. Unmatched speed, accuracy, and reliability are cornerstones of this legendary brand. Since 1996, EOTECH Holographic Weapon Sights (HWS) have been designed, developed, and manufactured in the USA. In 2016, EOTECH expanded its optics series with the introduction of the Vudu line of premium magnified optics, designed for the most demanding users. The rigorous standards require a continuous focus on product quality, not quantity, to ensure that the highest specifications are not only met but exceeded. When there is no room for error, compromises are not an option. Exactly the right league, where EOTECH feels at home.
Warning: This product contains very small and/or button batteries.
Improper handling of batteries can lead to serious injuries or even death within just 2 hours, especially in young children (e.g., chemical burns and possible perforation of the trachea). If you suspect that a battery has been swallowed, please seek medical attention immediately. Keep batteries out of the reach of children and dispose of empty or defective batteries promptly in accordance with local disposal regulations.
General usage note: Always insert batteries correctly (+/-), risk of injury from fire, explosions, or leaks, do not disassemble, charge, crush, expose to fire or high temperatures.
Note: Battery and Electrical Law (§ 18 BattG in conjunction with § 10 Abs. 1 ElektroG)
(Show description in original language)
Bei uns ab Lager lieferbar.
Das XPS 2-2 von EOTECH (der kleine Bruder vom etwas teureren Model EXPS 2-2), gehört Qualitativ auch mit zu den besten holografischen Visieren das aktuell erhältlich ist. In Punkto Verarbeitung, Qualität und Leistung ist dieses High-End Reflexvisier wirklich sein Geld wert. Das nahezu unverwüstliche Gehäuse wird durch einen Schutzbügel aus hartanodisiertem, matt-schwarzem Aluminium zusätzlich geschützt. Das Batteriefach ist seitlich zugänglich, die Bedienelemente sind auf der Rückseite, dem Schützen zugewandt, angebracht. Der kompakte Aufbau des Systems beansprucht außerdem auch nur sehr wenig Platz auf Ihrer Picatinny Schiene, ~67 mm reichen hier vollkommen aus.
Doch nicht nur die Verarbeitung ist bei EOTECH absolute Spitze - das holografische Absehen, bestehen aus hunderten kleiner Punkte sorgt für hohe Schärfe und geringe Überstrahlung. Das 2-Punkt Absehen ist speziell mit Haltepunkten für das Kaliber .223 ausgerichtet. Neben dem 1 MOA großen Mittelpunkt befindet sich ein weiterer 1 MOA-Punkte unterhalb als Haltepunkt für ~460m. Der 68 MOA große Umkreis dient dagegen vor Allem der schnellen Zielerfassung bei der Jagd oder dynamischen Disziplinen (30 cm auf 50m). Dieses ballistische Absehen wurde entwickelt für 5,56 Nato/0,223 cal mit 62 g M855 FMJ bei ungefähr 2.680 fps mit einem 14,5-Zoll-Lauf. Bei Verwendung anderer Munition oder Lauflängen können die Absehen-Punkte etwas variieren.
Unterschiede zum EXPS Modell: Helligkeitssteuerung hinten am Gerät (bei EXPS seitlich, erleichtert die Bedienung im Anschlag), Bei EXPS: Schnellmontagesystem - XPS mit Torxschraube zum Fixieren. Die Höhe der optischen Achse beträgt bei den 55x und XPS Modellen ca. 38mm, bei den EXPS Modellen ca. 45mm.
Kurzum - einfach genial und auf jeden Fall sein Geld wert!
Was sind die Unterschiede der Varianten?
XPS - die Basis
kein Schnellverschluss
Bedienelemente sind hinten angebracht (Richtung Schütze)
Höhe der optischen Achse ca. 38mm
EXPS - der Taktische
Schnellverschluss
Bedienelemente sind seitlich angebracht (links)
Höhe der optischen Achse ca. 45mm
2 - der Zivilist
kein Nachtsichtmodus
3 - der Operator
Nachtsichtmodus
Was sind die verschiedenen Absehen?
-0
das Standardabsehen
1 MOA-Punkt mit 65 MOA-Kreis
-1
1 MOA-Punkt, NUR der Punkt
-2
1 MOA-Punkt mit 65 MOA-Kreis
ein weiterer 1 MOA-Punkt unterhalb des Ersten, für 500yds (bei 50/200yds zero)
-4
1 MOA-Punkt mit 65 MOA-Kreis
drei weitere 1 MOA-Punkte unterhalb des Ersten, für 400, 500 & 600yds (bei 50/200yds zero)
Daraus ergibt sich z. B.:
XPS2-0
ohne Schnellmontage
rückseitige Bedienelemente
ohne Nachtsichtmodus
Kreis-Punkt-Absehen
EXPS3-4
Schnellmontage
seitliche Bedienelemente
mit Nachtsichtmodus
Kreis-Punkt-Absehen mit 3 zusätzlichen Haltepunkten
Der Nachtsichtmodus regelt das Leuchtabsehen so weit runter, dass es keine Überstrahlung von Nachtsichtgeräten gibt (NVG-compatible).
Absehen:
.
Highlights:
1-fache Vergrößerung
Parallaxefrei
Leuchtabsehen: Ballistische Haltepunkte für Kaliber .223 (bis 500m)
2 MOA Rotpunkte (Mitte ~45-180m + 1 Haltepunkte ~460m)
68 MOA Ring (30cm / 100m)
Einzigartiger Leuchtringaufbau aus vielen kleinen Punkten, dadurch geringe Streuung
20 Helligkeitsstufen für sehr feine Abstimmung im Tageslicht
Programmierbare Abschaltung (Automatik)
Nicht Nachtsichtgeräte kompatibel
inkl. Picatinny / Weaver Montage
Wasserdicht bis 3m Tauchtiefe
Beschlagfrei durch hermetische Abdichtung des Gehäuses
Schutzbügel aus hartanodisiertem, matt-schwarzem Aluminium
Stoßfestes Gehäuse aus einem Block aus Flugzeugaluminium
Restenergie Warnung
Lieferumfang:
EOTech XPS2-2™
Schnellstartanleitung
Die Anleitung in deutscher Sprache findet Ihr hier
Hinweis zu Produkten von EOTECH:
Die Verpackungen der Produkte werden nach Ankunft in Deutschland geöffnet um die Seriennummern mit den Herstellerangaben abzugleichen, d. h. evtl. "Siegelaufkleber" sind nicht mehr intakt. Die Batterie ist werksseitig bereits eingelegt. Aufgrund dieser Arbeitsschritte ist es evtl. möglich, dass Montagespuren sichtbar sind. Das ist ganz normal. Es handelt sich hierbei um KEINE B-Ware!
Technische Daten:
Vergrößerung:
1-fach
Augenabstand in mm:
unbegrenzt
Absehen:
2 x 1 MOA-Punkte + 68 MOA Ring
Leuchtabsehen:
ja (rot)
Helligkeitsstufen:
20x
Absehenverstellung / Klick:
0,5 MOA (100 m)
Max. Absehen-Verstellung Höhe:
+- 40 MOA
Max. Absehen-Verstellung Seite:
+- 40 MOA
Temperaturbereich:
- 40°C bis + 60°C
Größe in mm
95 x 61 x 61 mm (l x b x h)
Gewicht in g:
250 g
Batterie:
ja, CR123
EOTECH produziert professionelle Optiken, denen weltweit führende Profis vertrauen. Unvergleichliche Geschwindigkeit, Genauigkeit und Zuverlässigkeit sind Eckpfeiler dieser legendären Marke. Seit 1996 werden EOTECH Holographic Weapon Sights (HWS) in den USA designed, entwickelt und hergestellt. Im Jahr 2016 erweiterte EOTECH seine Optikserie durch die Einführung der Vudu-Linie von Premium-Vergrößerungsoptiken, die für die anspruchsvollsten Benutzer entwickelt wurden. Die anspruchsvollen Standards erfordern eine kontinuierliche Konzentration auf die Produktqualität, nicht auf die Quantität, um sicherzustellen, dass die höchsten Spezifikationen nicht nur erfüllt, sondern übertroffen werden. Wenn es keinen Spielraum für Fehler gibt, sind Kompromisse keine Option. Genau die richtige Liga, da fühlt sich EOTECH zu Hause.
Achtung: Dieses Produkt enthält sehr kleine und/oder Knopf-Batterien.
Unsachgemäßer Umgang mit Batterien kann insbesondere bei Kleinkindern innerhalb von nur 2 Stunden zu erheblichen Verletzungen oder sogar zum Tod führen (z.B. chemische Verätzung und mögliche Perforation der Luftröhre). Bei Verdacht auf Verschlucken einer Batterie suchen Sie bitte umgehend einen Arzt auf. Halten Sie Batterien außerhalb der Reichweite von Kindern und entsorgen Sie leere oder defekte Batterien umgehend in Übereinstimmung mit den örtlichen Entsorgungsvorschriften.
Allgemeiner Verwendungshinweis: Batterien stets richtig einlegen (+/-), Verletzungsgefahr durch Feuer, Explosionen oder undichte Stellen, nicht zerlegen, aufladen, zerdrücken, Feuer oder heißen Temperaturen aussetzen.
Hinweis: Batterie- und Elektro-Gesetz (§ 18 BattG i.V.m. § 10 Abs. 1 ElektroG)