Note:
The item location is abroad. Please note that this may affect delivery conditions, shipping times, and/or the purchasing process.
Available from stock with us.
The Tinck Arms Perun X17 is a modern semi-automatic rifle based on the AR15/AR10 - even if the similarity is not immediately apparent - but in the powerful caliber .308 Winchester. The Slovenian manufacturer used many elements of the AR platform for the new weapon so that the shooter can rely on a large accessory market. Trigger, grip, and safety as well as barrel, barrel nut, bolt head, firing pin, and gas block with gas tube are compatible with AR15 Mil-Spec parts or AR10/SR25 parts. The magazine release lever and bolt catch lever also correspond to the original but are designed to be ambidextrous from the factory. This allows the use of third-party parts for wear items and is not tied to a single manufacturer.
The major differences are mainly found inside: the most outstanding feature is the hybrid gas system, which uses a standard AR15 gas block - mounted is the excellent adjustable gas block from Superlative Arms - to direct the powder gases through a shortened gas tube to a short stroke piston. This keeps the moving mass low and close to the center of gravity, while simultaneously avoiding the disadvantage of the AR15 and preventing dirt from being blown into the receiver and the shooter's face. The result is a weapon that sits steady during firing and operates very cleanly.
The system spring runs in the receiver and not in a separate buffer tube - this makes the use of folding stocks possible without modification, and a length-adjustable Masada folding stock is mounted from the factory. Picatinny end plates are also available. The non-reciprocating charging handle can be mounted on both sides and is positioned above the system. The bolt carrier completely seals the system and prevents dirt ingress.
An M-LOK handguard rounds off the weapon system, with a long Picatinny rail at 12 o'clock for optics mounting, extended by a short offset rail near the muzzle for mounting accessories that should not obstruct the sight line - aiming lights, where permitted, or 12 o'clock bipods. The 5/8"x24 muzzle thread is equipped with a muzzle brake.
Please note:
Due to the barrel length of over 40cm, this weapon is approved for sporting shooting and does not require a separate BKA permit.
Here as a purchaser, simply order online:
TINCK ARMS Perun X17
Also available on INSTALLMENT PAYMENT upon request!
The key features of this Semi-Auto Rifle:
- Tinck Arms Perun X17
- Semi-automatic rifle
- Caliber: .308 Winchester
- Many parts AR15 / AR10 compatible
- Trigger, safety & grip
- Bolt head with small parts & firing pin
- Barrel & barrel nut
- Gas block and gas tube (shortened)
- Magazine - of course
- Hybrid gas system
- Adjustable AR15 gas block combined with short stroke piston
- Clean operation and steady shooting behavior
- M-LOK handguard
- Staggered Picatinny rail at 12 o'clock
- Including folding sight
- Masada folding stock
- Cheek rest and length adjustable
- Charging handle convertible on both sides
- Non-reciprocating
- Muzzle thread: 5/8"x24
- Muzzle brake mounted
- Barrel length: 16 inches
Delivery includes:
- 1x Tinck Arms PERUN X17
- 1 piece 10-round magazine
- Delivery in cardboard box
Model:
Tinck Arms PERUN X-17
Caliber:
.308 Winchester
Barrel length:
16"
Magazine capacity:
10 rounds
Sights:
Folding sight
Application:
Hunting, SPORT
Weight:
approx. 3.8kg
Length:
approx. 71cm / 88-95cm
Height / Width:
approx. 22cm / 6cm
Other: The displayed weapon prices are plus 34.90 Euro weapon shipping within Germany. Our terms and conditions apply.
Product safety information: Information according to EU Product Safety Regulation (GPSR)
Manufacturer: TINCK d.o.o., Platiševa ulica 39, 5282 Cerkno, Slovenia, https://www.tinck-ar.com
Responsible person: TINCK d.o.o., Platiševa ulica 39, 5282 Cerkno, Slovenia, https://www.tinck-ar.com
WARNING: The presentation of the acquisition authorization is required for the purchase of this product!!!
(Show description in original language)
Bei uns ab Lager lieferbar.
Die Tinck Arms Perun X17 ist eine moderne Selbstladebüchse auf Basis der AR15/AR10 - auch, wenn man die Ähnlichkeit auf den Ersten Blick nicht sieht - aber im starken Kaliber .308 Winchester. Der slowenische Hersteller benutzte viele Elemente der AR Plattform für die neue Waffe damit der Schütze auf einen großen Zubehörmarkt zurückgreifen kann. Abzug, Griff und Sicherung sowie Lauf, Laufmutter, Verschlusskopf, Schlagbolzen und Gasabnahme mit Gasrohr sind mit AR15 Mil-Spec Teilen bzw. AR10/SR25 Teilen kompatibel. Magazinlösehebel und Verschlussfanghebel entsprechen ebenfalls dem Vorbild aber sind ab Haus beidseitig bedienbar ausgeführt. Dadurch kann man auch bei Verschleißteilen auf Dritthersteller zurückgreifen und ist nicht an einen Hersteller gebunden.
Die großen Unterschiede findet man vor allem innen: das herausragendste Merkmal ist das hybride Gassystem, welches eine Standard AR15 Gasabnahme verwendet - montiert ist die hervorragende verstellbare Gasabnahme von Superlative Arms - um die Pulvergase über ein gekürztes Gasrohr auf einen short stroke piston zu leiten. Dadurch bleibt die bewegende Masse gering und nah am Schwerpunkt, aber gleichzeitig wird der Nachteil der AR15 vermieden und kein Dreck ins Gehäuse und das Gesicht des Schützen geblasen. Das Ergebnis ist eine Waffe die ruhig im Schuss liegt und sehr sauber läuft.
Die Systemfeder läuft im Gehäuse und nicht in einer separaten buffer tube - dadurch ist die Verwendung von Klappschäften ohne Modifikation möglich und ein längenverstellbarer Masada-Klappschaft ist ab Werk montiert. Es sind auch Picatinny-Endplates erhältlich. Der nicht-mitlaufende Ladegriff kann auf beiden Seiten montiert werden und liegt über dem System. Der Verschlussträger schließt das System komplett ab und verhindert das Eindringen von Dreck.
Ein M-LOK Handschutz rundet das Waffensystem ab, eine lange Picatinnyschiene auf 12 Uhr zur Optikmontage wird erweitert durch eine abgesetzte kurze Schiene nahe der Mündung zur Montage von Zubehör, welches die Visierlinie nicht stören soll - Zielleuchten, wo erlaubt, oder 12 Uhr Zweibeine. Das 5/8""x24 Mündungsgewinde ist mit einer Mündungsbremse ausgestattet.
Bitte beachten:
Aufgrund der Lauflänge von über 40cm ist diese Waffe für das sportliche Schießen zugelassen und erfordert keinen separaten BKA-Bescheid
Hier als Erwerbsberechtigter, einfach online bestellen:
TINCK ARMS Perun X17
Auf Wunsch auch per RATENZAHLUNG möglich!
Die wichtigsten Merkmale dieser Semi-Auto Rifle:
Tinck Arms Perun X17
Halbautomatische Büchse
Kaliber: .308 Winchester
viele Teile AR15 / AR10 kompatibel
Abzug, Sicherung & Griff
Verschlusskopf mit Kleinteilen & Schlagbolzen
Lauf & Laufmutter
Gasabnahme und Gasrohr (gekürzt)
Magazin - natürlich
hybrides Gassystem
verstellbare AR15 Gasabnahme kombiniert mit short stroke piston
sauberer Betrieb und ruhiges Schussverhalten
M-LOK Handschutz
abgestufte Picatinnyschiene auf 12 Uhr
inklusive Klappvisierung
Masada Klappschaft
Wangenauflage und Länge verstellbar
Ladegriff beidseitig umbaubar
nicht mitlaufend
Mündungsgewinde: 5/8"x24
Mündungsbremse montiert
Lauflänge: 16 Zoll
Lieferumfang:
1x Tinck Arms PERUN X17
1 Stück 10-Schuss
Lieferung in Kartonbox
Modell:
Tinck Arms PERUN X-17
Kaliber:
.308 Winchester
Lauflänge:
16"
Magazinkapazität:
10 Schuss
Visierung:
Klappvisier
Anwendung:
Jagd, SPORT
Gewicht:
ca. 3,8kg
Länge:
ca. 71cm / 88-95cm
Höhe / Breite:
ca. 22cm / 6cm
Sonstiges:Die angezeigten Waffenpreise verstehen sich zzgl. 34,90 Euro Waffenversand innerhalb Deutschland. Es gelten unsere AGB
Produktsicherheitshinweise:Informationen gemäß EU-Produktsicherheitsverordnung (GPSR)
Hersteller: TINCK d.o.o., Platiševa ulica 39, 5282 Cerkno, Slovenia, https://www.tinck-ar.com
Verantwortliche Person: TINCK d.o.o., Platiševa ulica 39, 5282 Cerkno, Slovenia, https://www.tinck-ar.com
ACHTUNG: Zum Kauf dieses Produkts ist die Vorlage der Erwerbsberechtigung erforderlich !!!