ERATAC Block Mounting Gen2 36 H 38 / 20mm

312.55 €

72459 Albstadt, Germany

ID: 9560129

This offer is currently not available.

Safe shopping with Gunfinder

Our AI-supported provider identity verification makes Gunfinder the safest online marketplace. Learn more

About the seller

GermanGunWorks

Retailer

8,541 offers

Details

Original language

German

Category

Condition

New

Location

🇩🇪 72459 Albstadt, Germany

Availability

Not available

Timeliness

This offer is based on an offer mirroring, where the offer data was transferred from a shop, merchant, or external marketplace to us. Please note that temporary price discrepancies may occur due to possible delays in data transmission.

Source: GermanGunWorks
Last updated: before about 13 hours

Description

- Well suited for repeaters as well as for AR-10 systems - Adjustable steel QD safety lever attachment for all Picatinny & Weaver rails, also outside of the norm - Equipped with the ERATAC UNIVERSAL interface for additional attachments such as shooting angle compensators - 100% repeatable & shot-proof. Tested up to caliber .50 BMG - Completely machined from a high-strength aluminum alloy, with surface anodizing according to Mil-Spec. Type III Info & Links Note: The height specifications of the manufacturers differ in measurement between the optical axis (OA), from the rail to the center of the ring, and the construction height (BH), from the bottom edge of the ring to the rail. Therefore, we always provide two height specifications in the technical data to make it as easy as possible for our customers to calculate the correct installation. Note: Possibly additional... (Show description in original language)

- Gut geeignet für Repetierbüchsen als auch für AR-10 Systeme - Einstellbare Stahl QD-Sicherheitshebel Befestigung für sämtliche Picatinny & Weaver-Schienen, auch ausserhalb der Norm - Ausgestattet mit der ERATAC UNIVERSAL-Schnittstelle, für zusätzliche Anbauteile wie z.B. Schusswinkelkompensator - 100% wiederholgenau & schussfest. Bis Kal. 50 BMG getestet - Komplett gefräst aus einer hochfesten Aluminiumlegierung, mit Oberflächen-Eloxierung nach Mil-Spec. Typ III Infos & Links Hinweis: Die Höhenangabe der Hersteller unterscheiden bei der Messung zwischen der Optischen Achse (OA), von der Schiene bis zur Mitte des Rings und der Bauhöhe (BH), von der Ringunterkante bis zur Schiene an. Daher geben wir in den technische Daten immer zwei Höhenangaben an, um unseren Kunden die Berechnung der korrekten Montage möglichst leicht zu machen. Hinweis: Eventuell zusä...