Achtung: Your browser is outdated. Please note that Gunfinder may not work properly in some areas. You should update your browser as soon as possible. Learn more here!

Swiss Army helmet made of submarine steel in small size 55-56 / ideal for civil protection / steel helmet Swiss Made

89 €

41061 Mönchengladbach, Germany
16.01.2026
15
ID: 9714960
Safe shopping with Gunfinder
Our AI-supported provider identity verification makes Gunfinder the safest online marketplace. Learn more
About the seller
phwal001
Private seller
Active since 04.11.2023
Satisfaction: TOP

Details

Original language
German
Category
Condition
Used
Location
🇩🇪 41061 Mönchengladbach, Germany
Availability
Available
Shipping is done
within the EU
Shipping costs

7

Changes
1 change

Description

Note: The item location is abroad. Please note that this may affect delivery conditions, shipping times, and/or the purchasing process.

Very high-quality military steel helmet of the Swiss Army from the 70s-80s. A good option for civil protection. 

The helmet is complete, the shell is in good condition, and the leather lining is well-maintained and absolutely ready for use.

The material is hardened submarine steel (Hadfield-Steel / manganese steel) of the finest quality and a material thickness of 1.15 mm. The shell is coated with olive-green rough camouflage paint.


In my opinion, the best option for personal civil protection:

In the event of war, you can confidently assume that civil protection in Germany de facto does not exist. From the Ukraine war, we know that most civilian casualties are caused by artillery fire.

Kevlar has a material-technically increased protective effect of about ~15% compared to a steel helmet; however, Kevlar is also very sensitive to moisture and light, which is why it actually has a shelf life, or loses its protective effect even before that if exposed to moisture or direct UV light. After the expiration date, the full protective effect of Kevlar is no longer guaranteed, which is why it must be regularly decommissioned by the military. 
Kevlar helmets on the second-hand market are usually decommissioned specimens that have exceeded their shelf life. Their protective effect is therefore no longer fully guaranteed. A steel helmet is significantly more rigid in this regard and has a much longer service life.

Since ballistic helmets are not bulletproof but designed to protect against shrapnel, a steel helmet is just as effective, especially since it was originally designed for this purpose. 

Basically, one must weigh whether to buy a new Kevlar helmet every 10 years for about €500 that meets military personnel requirements. However, if you go to such lengths to protect your head, experience shows that you will likely get hit in the knee anyway (Murphy's Law).
In my opinion, a simple good steel helmet is the much more cost-effective solution and completely sufficient for civil requirements.

Another component that should not be overlooked is comfort.
In a serious situation, assume that you will have to wear the helmet for several days in a row. If it presses anywhere on your head, it will become torture at the latest after the first day.
 


Size:

Size 55-56 is designed for people with a head circumference of 55-56 cm. 
If you have a value above this, I would advise against getting this size, as you will encounter space issues. If you have a value below this, it is not a problem; any shortfall can be compensated for if necessary.


Features:

Very high-quality manganese steel according to military and even Swiss standards. The edges are flanged to increase the protective effect.

Compact aesthetic shape that allows unrestricted mobility. Hearing is not impaired, and the "Alpenpanorama" field of vision allows the use of binoculars and optics. 

The weight is well distributed, and one quickly gets used to wearing it.

The shell has two massive ventilation bolts in the rear area.

The helmet is almost annoyingly pedantically adjustable in Swiss fashion. This can take a few hours, but once it is done, the helmet sits very well and comfortably.

The four leather tabs inside are lined with a padding material made of wool felt. These inserts can be removed, allowing for further personalization of the fit.

The helmet has an additional safety mechanism built into the chin strap - if the chin strap is subjected to a significantly higher force, the safety buckle pops out and it opens. This is to prevent damage to the cervical vertebrae of the wearer should they get caught awkwardly with the helmet, for example, when jumping from a height.


Notes:

This is de facto a modern form of the Morion helmet type from the 16th century.

The exact year of construction is 1977.

I unfortunately had to remove the cord inside for photographing; however, you will need to adjust the cord to your own size anyway. It will, of course, be included and is wrapped around twice.

The leather benefits from being occasionally rubbed with some leather grease to keep it supple.

Due to the leather, the helmet should not be stored in a damp or hot environment.

If you have any questions about the piece or armor in general, feel free to send me a message.

Please refrain from buying any supposedly inexpensive Chinese "UHMW-PE" helmets online!

1. Experience shows that you cannot trust those rascals. In the worst case, it is simply cheap cast PE, or in the best case, low-quality PU without significant ballistic properties.
2. The crap probably withstands as much as a bicycle helmet and might even give you cancer before it is needed.
3. Modern UHMW-PE (like Dyneema) does have increased tear resistance compared to Kevlar; however, it also has worse trauma values and is therefore not a good choice for ballistic head protection.
 


Shipping (insured with DHL)

DE €7
EU €15

(Show description in original language)

Sehr hochwertiger militärischer Stahlhelm der Schweizer Armee aus den 70er-80er Jahren. Gute Option für den Zivilschutz. 

Der Helm ist vollständig, die Glocke in gutem Zustand, das Innenfutter aus Leder ist gepflegt und absolut einsatzbereit.

Das Material ist gehärteter U-Boot-Stahl (Hadfield-Steel / Manganstahl) in feinster Güte und einer Materialstärke von 1,15 mm. Die Glocke ist mit oliv-grünem Rauhtarn-Lack überzogen.
 

Größe:

Größe 55-56 ist ausgelegt für Menschen mit einem gemessenen Kopfumfang von 55-56 cm. 
Sollten Sie einen Wert darüber besitzen, kriegen Sie Platzprobleme. 
Sollten Sie einen Wert darunter besitzen, ist das kein Problem. Fehlbeträge kann man zur Not ausgleichen.


Eigenschaften:

Sehr hochwertiger Manganstahl nach militärischen, und sogar schweizer Anforderungen. Die Ränder sind zur Erhöhung der Schutzwirkung gebördelt.

Kompakte ästhetische Form, die uneingeschränkte Beweglichkeit ermöglicht. Das Hörvermögen ist nicht beeinträchtigt und das "Alpenpanorama" Sichtfeld ermöglicht die Verwendung von Ferngläsern und Optiken. 

Die Glocke verfügt über zwei massive Lüftungsbolzen im hinteren Bereich.

Der Helm ist in schweizer Manier fast schon nervig pedantisch einstellbar. Das kann schonmal etwas Zeit nehmen, wenn es aber erstmal erledigt ist, sitzt der Helm sehr gut und angenehm.

Die vier Lederzungen im Inneren sind mit einem Polstermaterial aus Wollfilz gefüttert. Diese Einlagen lassen sich herausnehmen, die Passform kann man dadurch noch weiter personalisieren.

Das Gewicht ist gut verteilt und man gewöhnt sich schnell ans Tragen.

Der Helm hat einen zusätzlichen Sicherheitsmechanismus an der Aufhängung des Kinnriemens eingebaut
Sollte der Kinnriemen einer deutlich höheren Kraft ausgesetzt sein, die deutlich über eine normale Verwendung hinausgeht, dann springt der Sicherungsbügel raus und er öffnet sich. 
Dies dient dazu beim Träger Schäden an den Halswirbeln zu verhindern, sollte man mit dem Helm ungünstig irgendwo hängen bleiben, etwa bei einem Sprung aus der Höhe.


Meiner Meinung nach die beste Option für den persönlichen Zivilschutz:

Gehen Sie in einem Kriegsfall getrost davon aus, dass der Zivilschutz in Deutschland de facto nicht existiert. Aus dem Ukraine-Krieg wissen wir, dass die meisten zivilen Opfer durch Artilleriebeschuss zu Tode kommen.

Da ballistische Helme entgegen der landläufigen Vorstellung ohnehin nicht "kugelsicher", sondern dafür ausgelegt sind gegen Schrapnelle zu schützen, ist auch ein Stahlhelm hierfür eben so effektiv, zumal er ursprünglich für diesen Zweck konzipiert wurde. 

Kevlar weißt in Relation zu einem Stahlhelm zwar eine materialtechnisch gesteigerte Schutzwirkung von ca. ~15% auf, allerdings ist Kevlar auch sehr Feuchtigkeits- und Lichtempfindlich, und besitzt ein MHD.
Ab dem Verfallsdatum ist die volle Schutzwirkung von Kevlar nicht mehr gegeben, weshalb es regelmäßig vom Militär ausgemustert werden muss.  Es kann seine Schutzwirkung auch schon vorher drastisch einbüßt, sollte es Nässe oder direkter Lichteinwirkung ausgesetzt sein. 
Kevlar-Helme auf dem Gebrauchtmarkt sind in der Regel ausgemusterte Exemplare, die das MHD bereits überschritten haben. Ein Stahlhelm ist in diesem Punkt wesentlich rigider und besitzt eine vielfach längere Nutzungslaufzeit, die theoretisch gegen Unendlich strebt.

Im Grunde muss man abwägen, ob man sich alle 10 Jahre einen neuen Kevlarhelm für ca. 500€ kaufen will, der Anforderungen für Militärpersonal erfüllt. Wenn man aber einen solchen Aufwand betreibt um den Kopf zu schützen, wird man erfahrungsgemäß wahrscheinlich ohnehin ins Knie getroffen (Murphys Gesetz).
Meiner Meinung nach ist ein simpler guter Stahlhelm die wesentlich kosten-effizientere Lösung und für zivile Anforderungen völlig ausreichend.

Gewichtstechnisch sind Stahlhelme auch nicht schwerer als Kevlar-Helme, wie manche glauben. Das gängige einem Soldaten noch zumutbare Gewicht für einen Schutzhelm liegt materialunabhängig in der Regel bei etwa 1,3 KG.

Eine wichtige Komponente, die man daher nicht außer Acht lassen darf ist der Komfort.
Gehen Sie in einem Ernstfall davon aus, dass Sie den Helm über mehrere Tage am Stück tragen müssen. Wenn dieser irgendwo am Schädel drückt, wird das spätestens nach dem ersten Tag zur Qual. Es ist also wichtig, dass der Helm korrekt und angenehm sitzt.


Anmerkungen:

Sollten Fragen zu dem Stück oder Rüstungen generell haben, schreiben Sie mir gerne eine Nachricht.

Das genaue Baujahr ist 1977.

Die Helmform könnte man mit einer modernen Interpretation eines Morion vergleichen (Helmtypus 16. Jahrhundert).

Die Kordel im inneren musste ich zum Fotografieren leider ausbauen, Sie müssten sich diese aber ohnehin selbst auf Ihre eigene Größe einstellen. Sie wird natürlich mitgeliefert und übrigens zwei-mal herumgeführt.

Dem Leder tut es ab und zu mal ganz gut mit etwas Lederfett eingerieben zu werden, damit es geschmeidig bleibt. Wegen des Leders sollte der Helm nicht in feuchter oder heißer Umgebung aufbewahrt werden.

Bitte sehen Sie davon ab sich online mit irgendwelchem vermeintlich "kostengünstigen" chinesischen "UHMW-PE" einzudecken!

1. Kann man den Lümmeln erfahrungsgemäß so wieso nicht trauen. Im besten Fall handelt es sich um nicht-ballistisches PU ohne nennenswerte Schutz-Eigenschaften. Im schlimmsten Fall handelt es sich einfach nur um billiges gegossenes PE und der China-Schrott verpasst Ihnen noch Krebs bevor er überhaupt zum Einsatz kommt.

2. Weist echtes modernes ballistisches UHMW-PE (etwa Dyneema) zwar eine erhöhte Reißfestigkeit gegenüber Kevlar auf, allerdings besitzt es auch schlechtere Traumwerte weswegen es ohnehin keine Gute Wahl für den ballistischen Schutz des Kopfes darstellt.
 


Versand (versichert mit DHL)

DE 7€
EU 15€

Print

More offers from phwal001

View offers
View offers

You might also be interested in

Top auctions

Sponsored offers