AK74 Tula Plum Deko Magazine (non-functional/deactivated) for Yunker AKS-74u of the russian-guns-de MWM Gillmann GmbH // Co2 AKSU Krinkov

Description:

Hard-to-find decorative weapon in caliber 4.5mm BB with real parts and authentic handling. Ironically being sold due to space constraints.

The weapon served almost exclusively as a decorative piece for me and is therefore, aside from minor natural signs of use, in nearly the same condition as it was delivered to me by MWM about 2-3 years ago.

The weapon was only shot for testing purposes, but achieved a surprisingly good shooting result: 
12 shots at about 9m with a consistent grouping of ~60mm, impact slightly left of center (see pictures, the Krink hits are marked in yellow).

Unfortunately, the second cartridge vented during shooting. The self-proclaimed expert attributed this to various causes (temperature differences, too rapid firing sequence, my technical misunderstanding as well as lack of motor skills). 
Since I only have the weapon for decoration, I did not pursue the matter further. One must therefore unfortunately assume that the mechanism does not function reliably and may need the seals to be overhauled.
If the mechanism continues to cause problems, feel free to bother Mr. Dimitri Gillmann about it, ideally via WhatsApp, as he always "advises" gladly, if one can believe the whole 5-star reviews on Google.

Please do not make the mistake of spending €1,200 on one of the "On Request" models on the website (completely overpriced and presumably returned multiple times). With a conscientious private seller, at least you can gauge what you are getting into.

Processing / Compromises:

Completely coated with deep black weapon lacquer and somewhat crudely processed in places. I suspect that many defective parts were used for the Krinkov series. However, this model is mostly fine. I have already handled 4 Gillmann Krinkovs, and each one was worse processed than the other.

The muzzle brake (Muzzle Booster) was barely "touched" by the retainer pin. I have absolutely cleanly, precisely, and skillfully deepened the indentation for this with a file; it now sits cleanly and fulfills its function wonderfully.

The cover is not 100% aligned with the housing, but it is hardly noticeable. It opens and closes easily and cleanly.

On the folding stock, one point was not welded cleanly (see pictures). The indentation for the front catch is also missing. However, stability is not compromised, and the stock can be folded in and out cleanly and authentically; it locks smoothly and absolutely securely.

The handguard retainer is a bit sloppily processed; locking can be a bit fiddly, but it fulfills its function.

The sling swivel on the gas block was not drilled cleanly (but this can be quickly remedied if you want to attach a sling).

There are also differences to the real AKS-74u:

The cover, for example, is attached with a weld, and the gas tube appears to be a modified AKM gas tube. For the upper handguard, a slightly shortened AKM handguard was apparently also used. 

The flip-up sight also cannot be folded down. 

Due to the construction, the weapon does not unconditionally accept decorative magazines. To use them, they must be modified beforehand. However, since the magazine lock is cleanly installed, nothing stands in the way of this endeavor for this model. 

A plus point is indeed the built-in hammer and the real Krink gas piston. While they do not serve a function, they make the weapon significantly more authentic when disassembled.

Anyone willing to accept a Tula Monday production with minor limitations can indeed look forward to an authentic and unbureaucratic Krinkov that is close to the original.

Please do not make the mistake of spending €1,200 on one of the "On Request" models on the website (completely overpriced and presumably returned multiple times). With a conscientious private seller, at least you can gauge what you are getting into.


Configurations:

Grip)
Currently, a surplus Bakelite grip is installed. If you would like a black Izhmash polymer grip, I can gladly exchange it for you.
The original Gillmann grip is unfortunately no longer available. It was unevenly ground at the top and therefore did not sit cleanly on the weapon. One would have had to force a correct installation and risk damaging the screw thread or bending the housing. It looked relatively gaudy anyway. I gave the part away.


Handguard)
Currently, the original Russian laminate wood handguard with the associated springs is installed.
A plum ribbed handguard made of nylon polymer is also available. It comes from an airsoft and had to be modified to be accepted by the Yunker. The ribbed plum sits sufficiently stable, looks fierce, and can be purchased for an additional fee.

Decorative mags, deactivated)
I have also fitted various decorative mags to size. They lock solidly and correctly. Of course, the pieces could also be further modified to incorporate the Krinkov mechanism. The following magazines could be sent along for an additional fee:

- Tula Plum 
- Cyrillic "F-Sign" (Izhmash, black, from Yunker-2)
- Cropped Tanker Pashtun Warlord Style  (Bulgarian, brown, shortened)
 

Notes:

If you have any questions, feel free to send me a message!

The price refers to the Co2 Yunker in its original configuration (weapon + mechanism + fiberglass Bakelite mag). The other parts can be purchased additionally (see configuration).
 

It has always been stored cool and dry. The Co2 unit has already seen silicone oil in its life.

The Pashtun Warlord mag and the wooden handguard appear lighter in the photos than they actually are. This is due to my phone camera.

The original box is still available and will be included. As well as, of course, the Co2 unit and the loading lever rubber cap.

The three gas cartridges and the small package of steel BBs that originally came with the weapon can be searched for and included upon request.

Age verification required (18 years and older).

Shipping is exclusively insured and with DHL, delivery to a branch or parcel station is also possible.