Waffenkurier oder ähnliches wird dann abgestimmt. Abholung auch möglich.
The sniper rifle model 1931, or the sniper rifle with the scope model 1931 and the Smirnskiy mount (A. Smirnskiy was the designer of this mount), was the first sniper rifle officially adopted into the equipment of the Red Army.
It was manufactured only between 1932-1938 by the arms factory in Tula (serial production; prototype models were produced from 1929-1931). The bases and mounts were also exclusively produced by the factory in Tula. (See star stamp)
PE model 1931 scope manufacturer
Factory No. 19/ No. 69 (Precision Mechanics Factory), Krasnogorsk
This factory originally designed the PE scope in 1931 and remained its main producer. In 1937, it ceased production of scopes and focused on other military optics. PE scopes from this factory were marked on the outer surface of the ocular lens block. The factory emblem (hammer and sickle with a star above and two pentagons below), the year of production, and the serial number were located within the rectangular central block with rounded corners.
From 1932-1936, these scopes were additionally marked with the model designation “В.П. обр.1931 г.” (scope model 1931) and an abbreviation “У.В.П.” (1932–1934) or “А.У.” (1935–1936) above the rectangular central block with the factory markings. “У.В.П” is the abbreviation for “Управление Военных приборов (АУ)”, Directorate for Military Devices of the Main Artillery Directorate, “А.У.” is the abbreviation for “Артиллерийское Управление”, Main Artillery Directorate.
The Main Artillery Directorate or Directorate for Military Devices of the Main Artillery Directorate was a military authority that commissioned the scopes at the production facility. These abbreviations indicate that a specific scope was “made to order from ...” At the end of 1936, the model designation and the abbreviation “А.У.” were removed, so the scopes were only marked with the main factory markings.
The earliest scopes had serial numbers consisting only of numbers. From 1934 to 1937, the scopes had letters before the serial number, with the letters A, Б, and B being known. The exact meaning of the letters is currently unknown; they presumably refer to the version of the drawings used for production.
Now to the actual rifle along with the scope.
Mosin Nagant model 91/30 from 1935 from Tula with acceptance СП (#139602)
Smirnskiy mount (#8y) and hexagonal base (#Л180), this is also stamped on the "receiver recoil lug" recoil block of the system.
PE scope model А.У. from 1935 (8#B7639) with crystal-clear visibility, fully functional turrets, and diopter adjustment (quite smooth, counter screw engages weakly)
Barrel rough but grooves and lands clearly visible, good shooting performance
The rifle was overhauled according to the stamp and the additional cross screw inserted into the stock in the arsenal or at least parts were replaced.
Except for the bolt and accordingly the scope along with the mount, it is matching numbers. The base seems to belong to the rifle. The scope along with the upper mount is nearly impossible to find matching numbers to the rifle. It was taken from what was available at the time.
The base was "glued" with the chamber, not irreversibly but safe for shooting! Since the three screws on each side are known to loosen easily.
Disassembly is not advisable; if pictures of the condition under the mount are desired, they can be sent upon serious purchase interest.
The bolt and chamber stem have Tula acceptance marks and were reinstalled into the rifle at Arsenal 56.
All parts are consistently marked with a star and thus also belong to the corresponding Tula Mosin.
I assume it is a reactivated Tula sniper and in the meantime, a straight chamber stem was installed.
Valid proof present!
Price is negotiable within reason
No, there is no bayonet included, as sniper Mosin Nagant rifles did not have one, and the front sight is also centered, as it should be.
(Show description in original language)Das Scharfschützengewehr Modell 1931 oder das Scharfschützengewehr mit dem Zielfernrohr Modell 1931 und der Smirnskiy-Montage (A. Smirnskiy war der Konstrukteur dieser Halterung) war das erste Scharfschützengewehr, das offiziell in die Ausrüstung der Roten Armee aufgenommen wurde.
Es wurde nur in den Jahren 1932-1938 von der Waffenfabrik in Tula hergestellt (Serienproduktion, Versuchsmodelle wurden 1929-1931 hergestellt). Auch die Sockel und Halterungen wurden ausschließlich von der Fabrik in Tula hergestellt. (Siehe Stern Stempel)
PE-Modell 1931 Zielfernrohrhersteller
Fabrik Nr. 19/ Nr. 69 (Fabrik für Präzisionsmechanik), Krasnogorsk
Diese Fabrik entwarf das PE-Zielfernrohr ursprünglich im Jahr 1931 und blieb dessen Hauptproduzent. Im Jahr 1937 stellte sie die Produktion von Zielfernrohren ein und konzentrierte sich auf andere militärische Optiken. PE-Zielfernrohre aus dieser Fabrik wurden auf der Außenfläche des Okularlinsenblocks gekennzeichnet. Das Fabrikemblem (Hammer und Sichel mit Stern darüber und zwei Fünfecken darunter), das Produktionsjahr und die Seriennummer befanden sich innerhalb des rechteckigen Mittelblocks mit abgerundeten Ecken.
In den Jahren 1932-1936 waren diese Zielfernrohre zusätzlich mit der Modellbezeichnung „В.П. обр.1931 г.“ (Zielfernrohr Modell 1931) und einer Abkürzung „У.В.П.” (1932–1934) oder „А.У.” (1935–1936) über dem rechteckigen Mittelblock mit den Fabrikmarkierungen versehen. „У.В.П“ ist die Abkürzung für „Управление Военных приборов (АУ)“, Direktion für militärische Geräte der Hauptartilleriedirektion, „А.У.“ ist die Abkürzung für „Артиллерийское Управление“, Hauptartilleriedirektion.
Das Hauptartillerie-Direktorat oder Direktorat für militärische Geräte des Hauptartillerie-Direktorats war eine Militärbehörde, die die Zielfernrohre bei der Produktionsstätte in Auftrag gab. Diese Abkürzungen weisen darauf hin, dass ein bestimmtes Zielfernrohr „auf Bestellung von ...” hergestellt wurde. Ende 1936 wurden die Modellbezeichnung und die Abkürzung „А.У.” entfernt, sodass die Zielfernrohre nur noch mit den Hauptmarkierungen der Fabrik gekennzeichnet waren.
Die frühesten Zielfernrohre hatten Seriennummern, die nur aus Zahlen bestanden. Von 1934 bis 1937 hatten die Zielfernrohre Buchstaben vor der Seriennummer, wobei die Buchstaben A, Б und B bekannt sind. Die genaue Bedeutung der Buchstaben ist derzeit nicht bekannt, vermutlich stehen sie für die Version der Zeichnungen, die für die Produktion verwendet wurden.
Nun zum eigentlichen Gewehr samt Zielfernrohr.
Mosin Nagant Modell 91/30 aus 1935 von Tula mit der Abnahme СП (#139602)
Smirnskiy-Montage (#8y) und Hexagonal-Basis (#Л180) dies ist ebenso auf dem "receiver recoil lug" Rückstoßblock vom System eingeschlagen.
PE Zielfernrohr Modell А.У. von 1935 8#B7639) mit glasklarer Durchsicht, voll funktionsfähige Türme und Dioptrieneinstellung (recht leichtgängig, Konterschraube greift schwach)
Lauf rau aber Züge und Felder gut erkennbar, gute Schussleistung
Das Gewehr wurde laut Stempel und der zusätzlichen in den Schaft eingebrachten Querschraube im Arsenal überholt oder zumindest Teile getauscht.
Bis auf den Verschluss und entsprechend das ZF samt Montage ist es nummerngleich. Basis scheint zum Gewehr zu gehören. Das ZF Samt oberer Montage ist nahzu unmöglich nummerngleich zum Gewehr zu finden. Es wurde damals genommen was verfügbar war.
Basis wurde mit Patronenlager "verklebt" nicht unlösbar aber schusssicher! Da sich die drei Schrauben auf jeder Seite bekanntlich leicht lösen.
Von einer Demontage ist abzusehen, sollten Bilder vom zustand unter der Montage gewünscht sein, können diese bei ernsthaftem Kaufinteresse zugesendet werden.
Der Verschluss und Kammerstengel haben Tula Abnahmen und sind aber im Arsenal 56 wieder in das Gewehr eingebaut worden.
Alle Teile sind durchgängig mit einem Stern versehen und gehören somit auch zum entsprechenden Tula Mosin.
Ich gehe davon aus, dass es ein reaktivierter Tula Scharfschütze ist und zwischenzeitlich ein gerader Kammerstängel verbaut war.
Gültiger Beschuss vorhanden!
Preis ist im Rahmen verhandelbar
Nein es gibt kein Bajonett dazu, denn Scharfschützen Mosin Nagant Gewehre hatten keins und das Korn ist auch mittig, so wie sich das gehört.