Export valve for the AirmaX Snowpeak PP700 with a power of up to 40+ Joules.
Suitable for 4.5mm/.177" and 5.5mm/.22"
The valve has been completely newly developed and designed for maximum energy output.
All components are made of stainless steel and aluminum.
Scope of delivery:
- Valve assembled
- Transfer block mounted
The installation is done by completely replacing the original valve with the export valve.
The valve spring force can be adjusted continuously.
The installation can now be carried out using an Allen key / pliers through a twelve-sided socket at the bottom of the valve (wrench size 19mm).
Installation instructions:
1. Completely release the air from the cartridge (Caution, the PP700 model does not have a pressure release screw. A complete emptying is required.)
2. Unscrew the grip panels and the grip frame using a precision screwdriver set.
3. Replace the original valve with the supplied parts.
WARNING: Performance-enhancing parts.
Installation in Germany only with permission or on the stand.
Please observe the legal regulations in your country.
We ship worldwide
Product Safety Regulation (GPSR)
Name: PCP TACTICAL 24
Address: Rabenberger Strasse 2, 08359 Breitenbrunn
URL: pcptactical24 de
E-Mail: pcptac24(at)outlook.de
Importer/EU Responsible:
Name: PCP TACTICAL 24
Address: Rabenberger Strasse 2, 08359 Breitenbrunn
E-Mail: pcptac24(at)outlook.de
Exportventil für die AirmaX Snowpeak PP700 Mit einer Leistung von bis zu 40+ Joule.
Passend für 4,5mm/.177" und 5,5mm/.22"
Das Ventil wurde von Grund auf neu entwickelt und auf maximale Energieentfaltung ausgelegt.
Alle komponenten sind aus rostfreiem Edelstahl und Aluminium hergestellt.
Lieferumfang:
- Ventil Zusammengebaut
- Transferblock montiert
Der Einbau erfolgt durch einen kompletten Austausch des Originalventils durch das Exportventil.
Die Ventilfederkraft kann stufenlos eingestellt werden.
Der Einbau kann nun mithilfe eines Imbusschlüssel / Zange erfolgen durch ein Zwölfeck am Ventilboden (Schlüsselweite 19mm).
Einbauhinweise:
1. Lassen Sie die komplette Luft aus der Kartusche ab (Achtung, das Modell PP700 verfügt nicht über eine Druckablassschraube. Ein Leerschlagen ist erforderlich.)
2. Schrauben Sie die Griffschalen und das Griffstück ab mithilfe eines Feinmechaniker Bit-Schraubendreher Set´s.
3. Tauschen Sie das original Ventil duch die mitgelieferten Teile aus.
ACHTUNG: Leistungserhöhende Teile.
Einbau in Deutschland nur mit Genehmigung oder auf dem Stand.
Bitte beachten Sie die gesetzlichen Bestimmungen in Ihrem Land.
Wir verschicken weltweit
Produktsicherheitsverordnung (GPSR)
Name: PCP TACTICAL 24
Adresse: Rabenberger Strasse 2, 08359 Breitenbrunn
URL: pcptactical24 de
E-Mail: pcptac24(at)outlook.de
Importeur/EU-Verantwortlicher:
Name: PCP TACTICAL 24
Adresse: Rabenberger Strasse 2, 08359 Breitenbrunn
E-Mail: pcptac24(at)outlook.de