Note:
The item location is abroad. Please note that this may affect delivery conditions, shipping times, and/or the purchasing process.
Repetier rifle Rover G2 Carbon. The very lightweight rifle, weighing only 2.5 kg, comes with a patented, one-piece carbon fiber stock with a damping rubber butt pad. The system housing is made of 7075 aluminum, precision machined with minimal tolerances, and features a blasted, satin matte surface finish followed by hard anodizing. A Picatinny rail is installed on the system box to allow for repeatable optic changes. The bolt is made of high-strength steel and is CNC machined. It is chrome-plated and has a twisted knurling. The bolt is equipped with 3 locking lugs and has an opening angle of only 60 degrees. Thus, it can be cycled without problems even when lying down. The cold-hammered barrel (22 mm) features the proven MRR multi-radial rifling interior profile. The barrel is equipped with a muzzle thread (M14x1) and is therefore prepared for the attachment of a suppressor. The trigger is adjustable. The safety used locks both the trigger and the trigger sear. It is a very safe system, as the locking of the trigger sear is designed to be particularly robust. And when the trigger sear is locked, the firing pin is essentially locked as well. Theoretically, a safety that directly locks the firing pin is safer, but due to the small size of the components, these parts are often less durable. The rifle has a removable magazine with a magazine capacity of 3 cartridges.
(Show description in original language)
Repetierbchse Rover G2 Carbon. Die sehr leichte Bchse nur 2,5 kg kommt mit einem patentiertem, aus einem Stck gefertigten Schaft aus Kohlefaser mit dmpfender Gummischaftkappe. Das Systemgehuse ist aus 7075er-Aluminium mit Minimaltoleranz przisionsgefrst und hat eine gestrahlte, seidenmatte Oberflchenveredelung mit anschlieender Hartanodisierung. Auf dem Systemkasten ist eine Picatinny-Schiene verbaut um einen wiederholgenauen Optikwechsel durchfhren zu knnen. Der Zylinderverschluss ist aus hochfestem Stahl CNC-gefrst. Er ist verchromt und hat eine gewundene Kannelierung. Der Verschluss ist mit 3 Verriegelungswarzen ausgestattet und hat einen ffnungswinkel von nur 60. Somit kann auch im Liegen ohne Probleme repetiert werden. Der kaltgehmmerte Lauf ( 22 mm) hat das bewhrte MRR-Multi-Radial-Rifeling Innenprofil. Der Lauf ist mit einem Mndungsgewinde (M14x1) ausgestattet und somit fr den Anbau eines Schalldmpfers vorbereitet. Der Abzug ist einstellbar. Die verwendete Sicherung verriegelt sowohl den Abzug als auch den Abzugstollen. Es ist ein sehr sicheres System, denn die Verriegelung des Abzugstollen ist besonders robust ausgelegt. Und wenn der Abzugstollen verriegelt ist, ist im Prinzip auch der Schlagbolzen verriegelt. Theoretisch ist eine Sicherung, die direkt den Schlagbolzen verriegelt, sicherer, aber aufgrund der geringen Gre der Bauteile sind diese Teile oft weniger widerstandsfhig. Die Bchse hat ein herausnehmbares Einsteckmagazin mit einer Magazinkapazitt von 3 Patronen.