Circa 15€
I'm offering a VFC MP5 GBB in the V2 version here.
It is factory V2, not modified.
The hop-up chamber is secured in the upper by a hollow pin, as I stripped a threaded screw with the Allen key, I had to drill it out.
It holds firmly, even from the blowback recoil.
The MP5 comes with everything that is visible in the pictures.
Original VFC bolt (I recommend using this only with a maximum of 130 PSI gas, one has already broken on me with strong gas)
Original VFC recoil spring (can only be used with the original VFC bolt), comes new and in original packaging.
The one visible in the photo is only for illustration.
In the Crusader bolt, there is an extra recoil rod-spring unit.
Original V2 magazine, sealed and in good condition.
Crusader steel bolt, with original plastic nozzle (the plastic nozzle is garbage, I wouldn't use it, otherwise the group is new and unused)
Bow Master aluminum nozzle with VFC typical NPAS (set screw in the valve)
Bow Master steel charging handle type B
FCW magwell
Bow Master extended magazine release
Bow Master aluminum grip
Crusader plastic feeding ramp
Guillotine Airsoft aluminum lever + rubber tensioner (this allows for finer adjustment of the hop-up and provides a more stable shot pattern, I recommend high-quality BBs like Lonex, 0.32 fly perfectly with the current NPAS setting)
RS steel charging handle support
Vortex Crossfire red dot (actually lifetime warranty, but I don't know if it expires when purchased privately)
Arrow Dynamic MI style M-LOK MP5 handguard
VFC handguard with decorative lamp
Decorative flashlight for M-Lok
VFC SEF grip with steel fire selector
Ultima Industries sight mount
An unopened gas bottle Ultraair 178 PSI and a once-used Ultraair with 164 PSI are also included.
2x spare V2 plastic hop-up ramps are also included.
Brand new VFC Navy grip + fire selector.
Additionally, a Begadi tracer, with external signs of use, is included, functioning without issues.
Link to the Begadi tracer:
https://www.begadi.com/begadi-spitfire-mk3-rgb-tracer-mit-muendungsfeuer-simulation-14mm-ccw-11mm-cw-schwarz.html
That adds up to quite a bit.
Shipping and customs also need to be considered.
The MP5 has been used as you can see, so it is a player's weapon.
If that bothers you, please look for a collector's VFC MP5 GBB.
This piece is now built solidly.
With these parts, the MP5 works so that it is truly playable.
I would advise against modifying anything further.
(except maybe the Crusader feeding ramp, but then you have to tinker and remove material from the V2 chamber and the ramp, the V2 plastic ramp is made of very soft plastic and rarely feeds correctly.
Using high-quality BBs can strongly prevent this)
I also advise against installing the Crusader steel front sight, as it does not have a continuous sling holder like the original zinc one.
This can cause the outer barrel to loosen.
The Bow Master steel outer could be installed instead, but I didn't get around to it myself.
(I also advise against this because the part of the hop-up, to which the outer barrel is screwed, is thin-walled, and higher weight can lead to breakage in that area.)
I took years to optimize it this way.
The MP5 runs and has a decent weight for its size.
Great piece.
I'm only selling because I have another one and that's enough for me.
Just for the MP5 alone, I paid €617 three years ago.
Shipping will be done with DHL
PayPal only F&F.
Sale only to persons over 18.
As this is a private sale, there is no return policy, money-back guarantee, or warranty!
(Show description in original language)Biete hier eine VFC MP5 GBB in der V2 Ausführung an.
Ist von Werk aus V2, nicht umgebaut.
Die Hop Up Kammer wird durch einen Hohlsplint im Upper fixiert, da ich einen Gewindestift mit dem Inbus rund gemacht habe, musste ich es aufbohren.
Hält fest, auch vom Blowback Rückstoß.
MP5 kommt mit allem was auf den Bildern zu sehen ist.
Original VFC Bolt (empfehle diesen nur mit maximal 130 PSI Gas zu benutzen, mir ist schon einer gebrochen bei starken Gas)
Original VFC Recoil Feder (kann nur im originalen VFC Bolt verwendet werden), kommt neu und original verpackt.
Der auf dem Foto ersichtliche ist nur zur Veranschaulichung.
Im Crusader Bolt ist noch einmal eine extra Recoilstange-Feder Einheit.
Original V2 Magazin, Dicht und in gutem Zustand.
Crusader Stahl Bolt, mit original Kunststoffnozzle (Kunststoffnozzle ist Müll, würde ich nicht benutzen, ansonsten ist die Gruppe neu und unbenutzt)
Bow Master Aluminum Nozzle mit VFC typischen NPAS (Madenschraube im Ventil)
Bow Master Stahl Charging Handle Typ B
FCW Magwell
Bow Master Extended Magazine Release
Bow Master Alu Grip
Crusader Kunststoff feeding Ramp
Guillotine Airsoft Alu Lever + Gummi Tensioner (damit kann man viel feiner das Hop Up einstellen und hat ein stabileres Schussbild, empfehle hochwertige BBs wie Lonex, 0,32 fliegen mit der aktuellen NPAS Einstellung top)
RS Stahl Charging Handle Support
Vortex Crossfire Red Dot (eigentlich lebenslange Garantie, aber weiß nicht ob die verfällt, wenn man's privat gekauft hat)
Arrow Dynamic MI Style M-LOK MP5 Handguard
VFC Handguard mit Dekolampe
Deko Flashlight für M-Lok
VFC SEF Griffstück mit Stahl Fire Selector
Ultima Industries Visier Mount
Eine ungeöffnete Gas Flasche Ultraair 178 PSI und eine, einmal benutze Ultraair mit 164 PSI sind auch noch dabei.
2x Ersatz V2 Kunststoff Hop Up Rampe sind auch noch dabei.
Nagelneues VFC Navy Griffstück + Feuerwahlhebel.
Zusätzlich noch ein Begadi Tracer, äußere Gebrauchsspuren vorhanden, störungsfreie Funktion gegeben.
Link zum Begadi Tracer:
https://www.begadi.com/begadi-spitfire-mk3-rgb-tracer-mit-muendungsfeuer-simulation-14mm-ccw-11mm-cw-schwarz.html
Da kommt schon was zusammen.
Versand und Zoll muss man auch noch bedenken.
Die MP5 wurde genutzt wie man sieht, ist also eine Spielerwaffe.
Wen das stört, der soll bitte eine Sammler VFC MP5 GBB suchen.
Das Teil ist jetzt grundsolide gebaut.
Mit diesen Teilen funktioniert die MP5 so dass sie wirklich spielbar ist.
Würde davon abraten noch mal Sachen umzubauen.
(außer höchstens die Crusader feeding Ramp, dann muss man aber basteln und Material an der V2 Kammer und der Rampe wegnehmen, die V2 Kunststoff Ramp ist aus sehr weichen Kunststoff und feedet in seltenen Fällen nicht korrekt.
Mit hochwertigen BBs kann man dem stark vorbeugen)
Rate zum Beispiel auch davon ab, das Crusader Steel Frontsight zu verbauen, da dieses nicht wie das originale aus Zink, keinen durchgehenden Slinghalter hat.
Dadurch kann sich der Außenlauf lösen.
Den Bow Master Steel Outer, könnte man da eher noch installieren, kam ich selber nicht mehr dazu.
(Rate ich aber auch davon ab, weil der Teil vom Hop Up, auf den der Außenlauf geschraubt wird, dünnwandig ist, und höheres Gewicht, dazu führen kann, dass der Bereich bricht.)
Habe Jahre gebraucht um sie so zu optimieren.
MP5 läuft und hat ordentliches Gewicht für die Größe.
Tolles Teil.
Verkaufe nur weil ich noch eine habe und die mir reicht.
Nur für die MP5 alleine habe ich vor drei Jahren 617€ bezahlt.
Versendet wird mit DHL
PayPal nur F&F.
Verkauf nur an Ü18 Personen.
Da Privatverkauf, Ausschluss von Warenrücknahme, Geldrückgabe oder Gewährleistung!