Achtung: Your browser is outdated. Please note that Gunfinder may not work properly in some areas. You should update your browser as soon as possible. Learn more here!
Offer deleted

HunTac Versa-Pod-Montage für Blaser R93, Blaser R8 und Mauser M03

84.95 €

24
ID: 9364056
Safe shopping with Gunfinder
Our AI-supported provider identity verification makes Gunfinder the safest online marketplace. Learn more
About the seller
HunTac
Retailer

Details

Original language
German
Brands
Products
Calibers
Andere/Unbekannt
Condition
New
Location
🇩🇪 -
Availability
Available

Description

The HunTac Versa-Pod mount fits directly onto a Blaser R93, Blaser R8, or Mauser M03 with a synthetic stock or wooden stock, provided that the front sling swivel is attached with a machine screw and not (!) with a wood screw. To mount the HunTac bipod mount on the stock, unscrew the original swivel mount and attach the mounting plate with a 5 mm hex screw. Make sure that the interface is vertically aligned. Use the hex flange nut on the inside of the stock and tighten the entire mount. We recommend using Locktite® 222 or similar to secure the screw. (Show description in original language)
Die HunTac Versa-Pod Montage passt direkt auf eine Blaser R93, Blaser R8 oder Mauser M03 mit Kunststoffschaft oder Holzschaft, wenn der vordere Gewehrriemenhalter mit einer Maschinenschraube und nicht(!) mit einer Holzschraube befestigt ist. Um die HunTac Zweibein-Montage am Schaft zu montieren, schrauben Sie die originale Drehhalterung ab und befestigen Sie die Montageplatte mit einer 5-mm-Inbusschraube. Stellen Sie sicher, dass die Schnittstelle vertikal ausgerichtet ist. Verwenden Sie die Sechskantflanschmutter an der Innenseite des Schaftes und ziehen Sie die komplette Montage an. Wir empfehlen die Verwendung von Locktite® 222 o.ä.. zur Sicherung der Schraube.

Similar offers

You might also be interested in

Sponsored offers