Mauser Einsteckmagazin für Mauser K98 , Umrüstkit MAUSER 98 MAGAZINE 3RD / 3 Schuss , Made in USA

Mauser Einsteckmagazin für Mauser K98 , Umrüstkit MAUSER 98 MAGAZINE 3RD / 3 Schuss , Made in USA

148 €

78628 Rottweil, Germany

625

ID: 8620934

Safe shopping with Gunfinder

Our AI-supported provider identity verification makes Gunfinder the safest online marketplace. Learn more

About the seller

VDB

External Marketplace

36,537 offers

Details

Original language

German

Brand

Mauser

Product

Mauser 98

Category

Condition

New

Location

🇩🇪 78628 Rottweil, Germany

Availability

Available

Timeliness

This offer is based on an offer mirroring, where the offer data was transferred from a shop, merchant, or external marketplace to us. Please note that temporary price discrepancies may occur due to possible delays in data transmission.

Source: VDB
Last updated: before about 16 hours

Description

Numrich Gun Parts Corporation
Insert magazine for Mauser K98,

Conversion kit MAUSER 98 MAGAZINE 3RD

After removing the magazine floor plate in the original magazine box, the insert magazine can be easily inserted.
The two side spring-loaded locking sliders of the insert magazine lock the insert magazine in the original magazine box and can also be easily removed.

Not suitable for calibers 7x64 and 9.3x62!
Max. cartridge length: 81mm

Finish: Black Blued
Manufacturer: Numrich Gun Parts Corporation, Made in USA
Model: all 98 systems with standard magazine box such as MAUSER K98
Capacity: 3 rounds / 3-Round
Material: Steel
Model: 98
Caliber: 8 mm Mauser (8 x 57 mm Mauser)
Not suitable for calibers 7x64 and 9.3x62! Max. cartridge length: 81mm

Delivery includes: 1x NUMRICH 98 insert magazine 3 rounds

Converts top loading Mauser 98 rifles into detachable magazine models without alteration.
All that is needed is to remove the military floorplate & spring and replace with this magazine.
Magazine is steel, with a blued finish. Fits long action cartridges .25-06, .270, 30-06 and 8mm.
If using pointed cartridges, a u-shaped cut-out is required at the front to facilitate the slightly longer cartridge.

SPECS: Fits standard Mauser 98 rifles. 8mm Mauser, 3rd capacity.
Product safety information: This product was made available on the marketplace before 13.12.2024. For manufacturer and safety information, please contact the offering dealer. (Show description in original language)

Numrich Gun Parts Corporation
Einsteckmagazin für Mauser K98 ,

Umrüstkit MAUSER 98 MAGAZINE 3RD

Nach entfernen des Magazinboden im original Magazinkasten, kann das Einsteckmagazin ganz einfach eingesteckt werden.
Durch die beiden seitlichen gefederten Verriegelungsschieber des Einsteckmagazin verriegelt das Einsteckmagazin im original Magazinkasten, und lässt sich ebenso einfach entfernen.

Nicht passend für die Kaliber 7x64 und 9,3x62 !
max. Patronenlänge: 81mm

Finish: Schwarz Brüniert
Hersteller: Numrich Gun Parts Corporation, Made in USA
Modell: sämtliche 98 Systeme mit Standard Magazinkasten wie z.B. MAUSER K98
Kapazität: 3 Schuss / 3-Round
Material: Stahl / Steel
Modell: 98
Kaliber: 8 mm Mauser (8 x 57 mm Mauser)
Nicht passend für die Kaliber 7x64 und 9,3x62 ! max. Patronenlänge: 81mm

Lieferumfang: 1x NUMMERICH 98 Einsteckmagazin 3 Schuss

Converts top loading Mauser 98 rifles into detachable magazine models without alteration.
All that is needed is to remove the military floorplate & spring and replace with this magazine.
Magazine is steel, with a blued finish. Fits long action cartridges .25-06, .270, 30-06 and 8mm.
If using pointed cartridges, a u-shaped cut-out is required at the front to facilitate the slightly longer cartridge.

SPECS: Fits standard Mauser 98 rifles. 8mm Mauser, 3rd capacity.
Produktsicherheitshinweise:Dieses Produkt wurde vor dem 13.12.2024 auf dem Marktplatz bereitgestellt. Für Hersteller- und Sicherheitsinformationen wenden Sie sich an den anbietenden Händler.