Pistol grip stock for shotgun type Beretta S.55 and S.56 ga 20, painted and with cap in bakelite. Made in Turkish walnut wood, dried to 16%. The stock has a drop at heel of 55 mm. The stock is available with a curvature of 3.5 mm. The stock is exclusively made for the receiver with helical springs of the hammers.
Since wood is a living material and subject to slight deformations caused by humidity and drying, it is possible that slight adjustments may be necessary on the parts in contact with the action frame during casing/assembly.
Shipping times for this product are generally 7/10 days, unless otherwise communicated by the manufacturer.
The shipment is made by courier for which traceability is provided.
Returns of unused and intact products are accepted, with a request to be made within 3 days of receipt; return shipping is the responsibility of the buyer.
Pistol stock for shotgun type Beretta S.55 and S.56 ga 20. Varnished and including recoil pad in bakelite. Made in Walnut wood dried 16%. The available drop at heel is 55 mm. The stock is available with curvature of 3.5 mm. The stock is made right for the receivers with helical springs of the hammers.
Since wood is a living material and subject to slight deformations caused by humidity and drying, it is possible that slight adjustments may be necessary on the parts in contact with the action frame during casing/assembly.
Shipping times for this product are generally 7/10 days, unless otherwise communicated by the manufacturer.
The shipment is made by courier for which traceability is provided.
Returns of unused and intact products are accepted, with a request to be made within 3 days of receipt; return shipping is the responsibility of the buyer.
(Show description in original language)
Pistolengriffschaft für Jagdbüchse Beretta S.55 und S.56 lehre 20, gemalt und mit kappe darin bakelite. Begriffen in türkischem Walnuß-Baum, getrocknet zu 16 %. Der schaft ist damit vorhanden schaftsenkung 55 Mm. Vorhanden schränkung dessen 3,5. Der shaft its ausschließlich dafür verschlussgehäuse mit hahnfeder spiralenförmig.
Da Holz ein lebendiges Material ist und durch Feuchtigkeit und Austrocknung leichten Verformungen unterliegt, kann es vorkommen, dass beim Verkleiden/Montieren an den mit dem Basküle in Kontakt stehenden Teilen leichte Anpassungen erforderlich sind.
Die Lieferzeit für dieses Produkt beträgt normalerweise 7/10 Tage, sofern der Hersteller nichts anderes angibt.
Der Versand erfolgt mit einem Spediteur, dessen Sendungsverfolgung gewährleistet ist.
Die Rücksendung des unbenutzten und unversehrten Produkts wird akzeptiert, mit einer Anfrage innerhalb von 3 Tagen nach Erhalt; der Rückversand geht zu Lasten des Käufers.
Pistol stock for shotgun type Beretta S.55 and S.56 ga 20. Varnished and including recoil pad in bakelite. Made in Walnut wood dried 16%. The available drop at heel is 55 mm. The stock is available with curvature of 3,5 mm. The stock is made right for the receivers with helical springs of the hammers
Since wood is a living material and subject to slight deformations caused by humidity and drying, it is possible that slight adjustments may be necessary on the parts in contact with the action frame during casing/assembly.
Shipping times for this product are generally 7/10 days, unless otherwise communicated by the manufacturer.
The shipment is made by courier for which traceability is provided.
Returns of unused and intact products are accepted, with a request to be made within 3 days of receipt; return shipping is the responsibility of the buyer.
A-TEC
AEA Airguns
AKAH
ASG
Aimpoint
Alpen Optics
Alpha Industries
Anschütz
Antonio Zoli
Ares
B&T Schalldämpfer
Baikal
Ballistol
Balzer
Barbour
Barnes
Barnett
Benelli
Beretta
Bergara
Blaser
Brandit
Bremer Tresor
Brenneke
Classified Ad
