Note:
The item location is abroad. Please note that this may affect delivery conditions, shipping times, and/or the purchasing process.
Blaser attachment mount for the Liemke Merlin series Blaser attachment mount for the Liemke Merlin series The new Blaser attachment mount for the Blaser riflescope 1-7x28 iC and the Merlin 13, Merlin 35, or Merlin 42. Thanks to the automatic positioning and alignment of the attachment mount based on the inner rail of the Blaser 1-7x28 iC, precise mounting is always ensured, even in complete darkness. By closing a clamping lever, the attachment mount is additionally locked securely on the objective. Thus, even with very frequent mounting and dismounting of the thermal imaging attachment, the highest repeat accuracy is guaranteed. With its ideal magnification range for hunting wild boar, the Blaser riflescope 1-7x28 iC becomes the new universal genius, showcasing its strengths not only in driven hunts and daytime stalking but also in night hunting for boars to the fullest extent. Thanks to a recoil pin that can be uniquely attached to the inner rail of the Blaser riflescope 1-7x28 iC, into which a massive crossbar engages, the consistent positioning of the thermal imaging attachment and its form-fitting connection is guaranteed. By closing the clamping lever, the attachment mount is additionally locked securely on the objective. Thus, even with very frequent mounting and dismounting of the thermal imaging attachment, the highest repeat accuracy is guaranteed. More information about the Blaser riflescope can be found at Blaser.de Note According to the current nationwide legal amendment, the mechanical adaptation of multifunctional attachment optics to firearms is permitted. Therefore, a multifunctional attachment optic with adapted weapon mounting is NOT a prohibited item. The item can thus be freely purchased/used by holders of a valid hunting license. Use as a holder of a valid hunting license at shooting ranges, e.g., for the purpose of zeroing, is permitted. Use within the framework of hunting is subject to the hunting regulations of the respective federal state.
(Show description in original language)
Blaser Vorsatzmontage für die Liemke Merlin Serie Blaser Vorsatzmontage für die Liemke Merlin SerieDie neue Blaser Vorsatzmontage für das Blaser Zielfernrohr 1-7x28 iC und das Merlin 13, Merlin 35 oder Merlin 42.Durch die automatische Positionierung und Ausrichtung der Vorsatzmontage anhand der Innenschiene des Blaser 1-7x28 iC ist das wiederholgenaue Montieren, selbst bei vollständiger Dunkelheit, immer gegeben. Durch das Schließen eines Klemmhebels wird die Vorsatzmontage zusätzlich auf dem Objektiv kraftschlüssig verriegelt. Somit ist selbst bei sehr häufigem Aufsetzen und Abnehmen der Wärmebild-Vorsatzoptik höchste Wiederholgenauigkeit gegeben. Mit seinem idealen Vergrößerungsbereich für die Jagd auf Schwarzwild wird das Blaser Zielfernrohr 1-7x28 iC damit zum neuen Universalgenie, das seine Stärken nicht nur auf der Drückjagd und Tagespirsch, sondern auch bei der Nachtjagd auf Sauen in vollem Umfang ausspielen kann.Dank eines in der Innenschiene des Blaser Zielfernrohrs 1–7x28 iC einmalig anzubringenden Rückstoßstollens, in welchen ein massiver Querriegel eingreift, ist die stets gleiche Positionierung der Wärmebild-Vorsatzoptik und deren formschlüssige Verbindung garantiert. Durch Schließen des Klemmhebels wird die Vorsatzmontage zusätzlich auf dem Objektiv kraftschlüssig verriegelt. Somit ist selbst bei sehr häufigem Aufsetzen und Abnehmen der Wärmebild-Vorsatzoptik höchste Wiederholgenauigkeit gegeben.Mehr Informationen zu dem Blaser Zielfernrohr finden Sie auf Blaser.deHinweisNach aktueller bundesweiter Gesetzesänderung, ist die mechanische Adaption von multifunktionalen Vorsatzoptiken auf Schusswaffen erlaubt. Somit ist eine multifunktionale Vorsatzoptik mit adaptierter Waffenmontage KEIN verbotener Gegenstand. Der Gegenstand kann somit von Inhabern eines gültigen Jagscheines frei erworben/geführt werden. Die Nutzung als Inhaber eines gültigen Jagscheines auf Schiessständen, z.B. zum Zwecke der Justage,ist erlaubt.Die Nutzung im Rahmen der Jagd obliegt der Jagdverordnung des jeweiligen Bundeslandes.