Note:
The item location is abroad. Please note that this may affect delivery conditions, shipping times, and/or the purchasing process.
The EDCX Firestarter Survival Bracelet Double Cobra black conceals a flammable cord with fire steel in a stylish exterior. This is water-repellent and easily ignitable, allowing you to start a fire in survival situations even without accessible ignition material. The lanyard can be worn as a catch cord on a knife, on a keychain, as decoration on a backpack, or on a belt. The color combination black has olive-colored parachute cord inside with black parachute cord outside. Procedure: 1) Prepare firewood: You can chop the wood with the Kevlar saw using even pulling movements and bundle it with the rope for transport to the fire site. 2) Unravel the keychain: Open the braid at the bottom end and remove the flammable thread. Simply cut off the keychain and tie it back together. 3) Prepare fire: Free the flammable cord from the parachute cord bracelet and fluff it up until it lies in a small bundle on the tinder. 4) Remove protective layer: The protective layer on the fire steel must be scraped off before use to create a spark. 5) Ignite sparks: Hold the fire steel and the scraper at a sharp angle to each other and push the scraper over the fire steel with pressure until sparks are generated. 6) Fire: With these steps, you can easily start a fire even in a forest with damp wood. - Break load: 250 kg - Width: 3 cm Sizes: - M = 22 cm - L = 23.5 cm
(Show description in original language)
Das EDCX Feuerstarter Survival Armband Double Cobra schwarz verbirgt in stylischem Äußeren eine brennbare Schnur mit Feuerstahl. Diese ist wasserabweisend und leicht brennbar, sodass Du in Survival-Situationen auch ohne greifbares Zündmaterial ein Feuer entfachen kannst. Das Lanyard kann als Fangschnur am Messer, am Schlüsselbund, als Deko an Rucksack oder am Gürtel getragen werden. Die Farbkombi schwarz hat olivfarbene Fallschirmleine innen mit schwarzer Fallschirmleine außen. Vorgehensweise: 1) Feuerholz vorbereiten: Das Holz kannst Du mit der Kevlarsäge mit gleichmäßigen Zugbewegungen zerkleinern und mit dem Seil zum Transport zur Feuerstelle bündeln. 2) Schlüsselanhänger aufdröseln: Öffne die Flechtung am unteren Ende und entnehme den brennbaren Faden. Schneide den Anhänger einfach ab und knote ihn wieder zusammen. 3) Feuer vorbereiten: Befreie die brennbare Schnur vom Fallschirmleinen-Armband und plustere es auf, bis es in einem kleinen Bündel auf dem Zunder liegt. 4) Schutzschicht entfernen: Die Schutzschicht auf dem Feuerstahl muss vor Verwendung abgeschabt werden, damit ein Funke entstehen kann. 5) Funken entzünden: Halte den Feuerstahl und den Schaber in einem spitzen Winkel zueinander und schiebe mit Druck den Schaber über den Feuerstahl bis Funken entstehen. 6) Feuer: Mit diesen Schritten lässt sich auch in einem Wald mit feuchtem Holz leicht ein Feuer entzünden. - Bruchlast: 250 kg - Breite: 3 cm Größen: - M = 22 cm - L = 23,5 cm