VectorOptics Angle Indicating 30mm ACD Mount
106.80 €
No permit required (18+)
31015 Conegliano, Italy
0
ID: 10053977
This item is currently unavailable.
Shop safely with Gunfinder
Our AI-powered seller identity verification makes Gunfinder the safest marketplace online.
Learn more
Details
- Original language
- Italian
- Category
- Condition
- New
- Location
- 🇮🇹 31015 Conegliano, Italy
- Availability
- Out of stock
Freshness
This listing is based on a mirrored offer, where the listing data was synced to us from a shop, dealer, or external marketplace. Please note that temporary price discrepancies may occur due to possible delays in data transmission.
- Source
- Armeriaregina
- Last updated
- about 9 hours ago
Description
Note:
The item is located abroad. Please note that delivery conditions, shipping times, and/or the purchase process may differ.
Easy to Use, Air Bubble Level, Angle Indicator on Side, Designed for Real Firearms, Full Metal, See-through.
This ADI is calibrated in degrees and cosines give you an instant read out which can enter directly into ballistic software program on your pocket PC or use with a pre-printed angle drop chart to achieve high accurate shooting.The red needle moves with your rifle and displays a number that indicates the percent your rifle is off level. Multiply the indicated percent by the target distance to easily calculate the adjusted distance for gravity.The bubble level which can be flipped to the side also allows you to have an additional indicator to achieve much higher accuracy.
SPECIFICATION:
Diameter:30mm with 1" adapter
Length:73mm (2.9 inch)
Ring Width:14mm (0.5 inch)
Indicator Dia.:30mm (1.2 inch)
Weight:62g (2.2 ounce)
Finish:Black matte
Angle indicator and scope level support long range precision shooting
Designed for real fire arms
The bubble level can be put on either side
See-through style
Level and indicator were both center aligned during the assembling
High quality 6063 T6 aircraft grade aluminum alloy
Including items: hex key, 25.4mm 1" adapter
Ps:1, If not satisfied with the angle indicator position, use the proper screwdriver to release the indicator screw and reset its position.
2, If the bubble is not shown in the middle or is not vertical when it's on the left side, use proper screwdriver to adjust the tiny screw for different height.
