The universal adapter is suitable for all riflescopes with PARD bayonet mounts and eyepiece diameters of 35.2 - 47 mm.
The installation is simple and intuitive, requiring only a few hand movements; no tools or tape are needed. First, the fixing ring of the adapter is loosened and removed from the adapter. Then, the fixing ring is placed on the eyepiece of the riflescope, and the appropriate PVC spacer ring is used to compensate for the gap between the eyepiece and the adapter. After that, the main adapter part is placed on the PVC spacer ring on the riflescope, and finally, the adapter is screwed in with the fixing ring.
Simple assembly tip: Insert the PARD PATRONUS SPEED UNI 3 ADAPTER with the bayonet lock into the adapter and lock it. Only suitable for the Dual USE night vision device PARD PATRONUS 007 / NV 850.
Attention: The adapters PARD PATRONUS SPEED UNI 2 and UNI 3 are not suitable for the BLASER RIFLES R93 and R8, as the bolt would be blocked by the adapter ring when cycling the action.
Eyepiece diameter: 35.2 - 47 mm
Compatibility: Riflescopes with PARD bayonet mount
Adapter material: Aircraft aluminum
PVC ring material: Polyvinyl chloride
Color: Black
Der Universaladapter eignet sich für alle Zielfernrohre mit PARD Bajonettaufnahme und Okulardurchmessern von 35,2 - 47 mm.
Die Montage erfolgt einfach und intuitiv mit nur wenigen Handgriffen, Werkzeuge oder Klebeband sind nicht nötig. Zuerst wird der Fixierring des Adapters gelöst und vom Adapter abgenommen. Dann wird der Fixierring auf das Okularteil des Zielfernrohres aufgesetzt und mit dem passenden PVC-Distanzring der Zwischenraum zwischen Okularteil und Adapter ausgeglichen. Danach wird das Adapterhauptteil auf den PVC-Distanzring am Zielfernrohr aufgesetzt und abschließend der Adapter mit dem Fixierring verschraubt.
Einfacher Montage Tipp: PARD PATRONUS SPEED UNI 3 ADAPTER mit dem Bajonettverschluss in den Adapter einfügen und verriegeln. Nur geeignet für das Dual USE Nachtsichtgerät PARD PATRONUS 007 / NV 850.
Achtung: Die Adapter PARD PATRONUS SPEED UNI 2 und UNI 3 eignen sich nicht für die BLASER BÜCHSEN R93 und R8, da beim Repetieren des Verschlusses dieser durch den Adapter Ring blockieren würde.
Okulardurchmesser: 35,2 - 47 mm
Kompatibilität: Zielfernrohre mit PARD Bajonettaufnahme
Material Adapter: Flugzeugaluminium
Material PVC-Ringe: Polyvinylchlorid
Farbe: Schwarz