Save thousands of euros on your installations and eliminated weapon repair work!
ZF adapter rail from ZF Zeiss inner rail (current ZF Zeiss profile) to cost-effective Picatinny/Weaver ring mount.
Made in Germany, from the best aircraft Dur Alu material, hard anodized, with little effort for Blaser saddle mounts (R93, R8, BBF95, etc.) or usable with EAW, Recknagel, etc. for swivel/clip mounts. We recommend having the rail mounted by a gunsmith, taking less than 10 minutes of work. Please request image and installation instructions
If you have a weapon with a ZF with an inner rail (Zeiss profile) but want to use various scopes, RVs, thermal imaging devices in the future, switch to the significantly cheaper Weaver/Picatinny ring mounts in conjunction with your existing mount. With our affordable adapter rail, you can use multiple scopes regardless of ring diameter (25.4mm, 30mm, and 34mm) in any height with cost-effective rings in the future.
Additional advantage, with many modern weapons, mounting a thermal imaging/RV attachment device is only possible with high effort and weapon damage. The heights of the in-house mounts originally designed only for ZFs with inner rails are almost always too low.
The attachment device touches the barrel, the iron sight, or the image is severely restricted by the silencer. When using high rings, the weapon remains in its original condition, and you can mount everything over the rings and switch the target optics with repeat accuracy.
Note that the rail is approximately 29cm long in its original condition (deliberately designed for RV attachment mounts). In the image with the Blaser mount, the rail was shortened by sawing.
Please note, improper handling of the weapon can result in serious health risks. Please read the enclosed safety instructions.
This product was made available on the marketplace before 13.12.2024. For manufacturer and safety information, please contact the offering dealer.
(Show description in original language)
Sparen Sie tausende Euros bei Ihren Montagen und wegfallende Waffen Rep. Arbeiten!
ZF-Adapterschiene von ZF Zeiss Innenschiene (aktuelles ZF Zeiss Profil) auf kostengünstige Picatinny/Weaver Ringmontage.
Made in Germany, aus bestem Flugzeug Dur Alu Material, hart Eloxiert, mit wenig Aufwand für Blaser Sattelmontage (R93, R8, BBF95 usw.) oder bei EAW, Recknagel usw. bei Schwenk/Einhakmontagen verwendbar. Wir empfehlen die Schiene von einem Büchsenmacher montieren zu lassen, weniger wie 10 Minuten Arbeit. Bitte Bild und Montageanleitung anfordern
Haben Sie auf Ihrer Waffe ein ZF mit Innenschiene (Zeiss Profil) möchten aber zukünftig verschiedene Zielfernrohre-RVs-Wärmebild Geräte verwenden, wechseln Sie auf die wesentlich günstigeren Weaver/Picatinny Ringmontagen in Verbindung mit Ihrer vorhandenen Montage. Mit unserer Preiswerten Adapterschiene können Sie zukünftig mehrere Zielfernrohre egal mit welchem Ringdurchmesser (25,4mm, 30mm und 34mm) in jeder Bauhöhe mit kostengünstigen Ringen verwenden.
Zusätzlicher Vorteil, bei vielen modernen Waffen ist die Montage eines Wärmebild/RV Vorsatzgerät nur mit hohem Aufwand und Waffenbeschädigung möglich. Die Bauhöhen der Hauseigenen Montagen ursprünglich nur für ZFs mit Innenschiene konstruiert, sind fast immer zu niedrig.
Das Vorsatzgerät berührt den Lauf, die Eisenkimme oder das Bild wird durch den Schalldämpfer stark eingeschränkt. Bei Verwendung hoher Ringe bleibt die Waffe im Original Zustand und Sie können über die Ringe alles montieren und wiederholgenau die Ziel Optiken wechseln.
Achtung die Schiene ist im Orig. Zustand ca 29cm lang (bewusst für RV Vorsatzmontagen konstruiert) Bei dem Bild mit Blaser Montage wurde die Schiene durch Absägen verkürzt.
Bitte beachten, bei unsachgemäßer Bedienung der Waffe können schwere gesundheitliche Schäden auftreten. Bitte lesen Sie die beiliegende Sicherheitshinweise durch.
Dieses Produkt wurde vor dem 13.12.2024 auf dem Marktplatz bereitgestellt. Für Hersteller- und Sicherheitsinformationen wenden Sie sich an den anbietenden Händler.