-8 %
UTG RG2W1156 Mount Rings 25.4 mm – Medium Height, 25 mm Wide
Price at the dealer: 24.90 €. Converted at the ECB rate as of October 20, 2026.
No permit required (18+)
72479 Straßberg, Germany
18
ID: 9895152
Purchase from outside the EU: The firearm goes through an importer in your country, the dealer handles the export.
How buying from Europe works
Shop safely with Gunfinder
Our AI-powered seller identity verification makes Gunfinder the safest marketplace online.
Learn more
Details
- Original language
- German
- Category
- Condition
- New
- Location
- 🇩🇪 72479 Straßberg, Germany
- Availability
- In stock
Freshness
This listing is based on a mirrored offer, where the listing data was synced to us from a shop, dealer, or external marketplace. Please note that temporary price discrepancies may occur due to possible delays in data transmission.
- Source
- Black Raptor
- Last updated
- about 3 hours ago
Description
Note:
The item is located abroad. Please note that delivery conditions, shipping times, and/or the purchase process may differ.
UTG Mounting Rings · 25.4 mm · Medium RG2W1156: 1-Inch Rings for Picatinny/Weaver – measure before buying The two-piece ring set is designed for scopes with a 25.4 mm / 1-inch main tube. Decisive factors are not only tube diameter and rail but also actual objective clearance, ring width, and enough straight clamping section on the scope.
Fits well / rather doesn’t fit
Fits well If your scope has a 25.4 mm main tube, the firearm has a suitable Picatinny/Weaver base, and height as well as 25 mm ring width match the optic and cheek weld.
Rather doesn’t fit For 30 or 34 mm main tubes, direct 11 mm dovetail mounting, or if a true lever QD mechanism is needed.
What the design practically achieves
25 mm ring width The wide clamping surface distributes contact over a large area but requires a correspondingly long straight main tube left and right of the turret block.
Medium height The available product data states 15 mm saddle height. The decisive factor remains the actual objective outer diameter including protective caps as well as the height of the base.
Six cap screws per ring The clamping force can be evenly distributed. More screws do not automatically mean more allowable torque; the optics manufacturer’s specifications are decisive.
Knurled nut instead of lever QD The rail clamp is quickly accessible but not a true lever QD mechanism. After disassembly and reassembly, the point of impact should be checked.
Gren
zen, disadvantages & avoiding bad purchases
“Medium” is not a universal height clearance. Measure the actual outer diameter of the scope tube, the height of your base, and the available straight section of the tube. The 25 mm ring width must not be confused with the 25.4 mm tube diameter.
For SKU RG2W1156, no clearly accessible official UTG product page was currently found. Therefore, no additional measurement or torque values not documented in Shopify are added here.
Technical data with practical interpretation
Ring diameter 25.4 mm / 1″. Not for 30 or 34 mm.
Saddle height 15 mm according to available product data. Always check scope clearance on the specific setup.
Ring width 25 mm per ring. Plan accordingly for a straight clamping section on the scope.
Interface Picatinny/Weaver with cross bolt and knurled nut; not directly for 11 mm dovetail.
Scope of delivery Included: 2 × UTG RG2W1156 mounting rings for 25.4 mm main tubes. Scope, base, adapter, and torque tool are not included.
Safe use Fully unload and secure the firearm. Clean contact surfaces, fully insert cross bolts into suitable slots, and align the scope only after correctly setting eye relief. Tighten cap screws gradually and evenly; the permissible clamping values of the optic manufacturer apply. Then check free play, ring gap, and point of impact.
FAQ Are 25 mm and 25.4 mm the same here? No. 25.4 mm is the tube diameter; 25 mm is the width of each ring body.
Do the rings fit 11 mm dovetail? Not directly. They are designed for Picatinny/Weaver.
Do they automatically fit a 50 mm objective? No. The actual outer diameter of the objective including protective caps and the specific setup are decisive.
Are these QD lever rings? No. The clamping works with knurled nuts, not levers.
Black Raptor · Purchase decision Barrel, rail, and real objective clearance must fit together. The RG2W1156 are a sensible 1-inch solution for Picatinny/Weaver if 25.4 mm main tube, 15 mm saddle height, and 25 mm clamping surfaces really work on the specific setup. Measuring before purchase prevents the typical bad purchase here. (Show description in original language)
UTG RG2W1156 Montageringe 25,4 mm – mittlere Bauhöhe, 25 mm breit UTG Zubehör bzw. Präzisionsoptik für kompatible Plattformen im jagdlichen, sportlichen und Outdoor-Einsatz. Die Ausführung unterstützt eine sichere Montage, Zielbeobachtung oder praktische Wartung.
Originalprodukt von UTG
Montageplattform, Rohrdurchmesser und Ausführung vor Bestellung prüfen
Nach Herstellerangaben montieren und geschützt lagern
Bei ausverkauften Varianten: Lieferzeit auf Anfrage.
Originalprodukt von UTG
Montageplattform, Rohrdurchmesser und Ausführung vor Bestellung prüfen
Nach Herstellerangaben montieren und geschützt lagern
Bei ausverkauften Varianten: Lieferzeit auf Anfrage.
