Sinclair TiN Turning Mandrel/Neck Turning 6 mm (0.241")

31.90 €

64668 Rimbach, Germany

ID: 9790721

Shop safely with Gunfinder

Our AI-powered seller identity verification makes Gunfinder the safest marketplace online. Learn more

About the seller

Wiederladewelt24

Dealer

10,829 listings

Details

Original language

German

Category

Condition

New

Location

🇩🇪 64668 Rimbach, Germany

Availability

Limited availability

Freshness

This listing is based on a mirrored offer, where the listing data was synced to us from a shop, dealer, or external marketplace. Please note that temporary price discrepancies may occur due to possible delays in data transmission.

Source: Wiederladewelt24
Last updated: about 23 hours ago

Description

Note: The item is located abroad. Please note that delivery conditions, shipping times, and/or the purchase process may differ.

Sinclair TiN Turning Mandrel / Neck Turning 6 mm (0.241") – Turning Mandrel / Neck Turning
The Sinclair Turning Mandrel in 6.12 mm / 0.241" is designed for precise Neck Turning: The case is aligned cleanly during turning, which promotes more uniform neck wall thicknesses. Additionally, the mandrel can also be used to adjust the Neck Tension. The surface is TiN-coated (Titanium Nitride). According to the manufacturer, this coating increases glide capability, reduces wear, and can significantly extend the lifespan compared to standard steel mandrels (up to 10 times mentioned).Highlights:Diameter: 0.241" (≈ 6.12mm)TiN coating for higher wear resistance and better lubricationManufacturing: approx. 0.002" under bullet diameter (typical for defined Neck Tension)For case neck turning (alignment) and also for adjusting the Neck TensionTechnical Data:ManufacturerSinclair InternationalArticle Number749019016Caliber6mmDiameter0.241" (≈ 6.12 mm)CoatingTiN (Titanium Nitride)Note on Size SelectionMandrel ≈ 0.002" under bullet Ø (e.g. 0.243" Bullet → 0.241" Mandrel) (Show description in original language)

Sinclair TiN Drehdorn/Aufweitdorn 6 mm (0.241") – Turning Mandrel / Neck Turning
Der Sinclair Drehdorn (Turning Mandrel) in 6,12 mm / 0.241" ist für das präzise Neck Turning (Hülsenhals abdrehen) gedacht: Die Hülse wird beim Abdrehen sauber ausgerichtet, was gleichmäßigere Halswandstärken begünstigt. Zusätzlich kann der Dorn auch genutzt werden, um die Nackenspannung (Neck Tension) einzustellen.Die Oberfläche ist TiN-beschichtet (Titanium-Nitrid). Laut Herstellerangabe erhöht diese Beschichtung die Gleitfähigkeit, reduziert Abrieb und kann die Lebensdauer im Vergleich zu Standard-Stahlmandrels deutlich verlängern (bis zu 10-fach genannt).Highlights:Durchmesser: 0.241" (≈ 6,12mm)TiN-Beschichtung für höhere Abriebfestigkeit und bessere SchmierfähigkeitFertigung: ca. 0.002" unter Geschossdurchmesser (typisch für definierte Neck-Tension)Für Hülsenhals-Abdrehen (Ausrichtung) und auch zum Einstellen der NackenspannungTechnische Daten:HerstellerSinclair InternationalArtikelnummer749019016Kaliber6mmDurchmesser0.241" (≈ 6,12 mm)BeschichtungTiN (Titanium-Nitrid)Hinweis zur MaßwahlMandrel ≈ 0.002" unter Geschoss-Ø (z. B. 0.243" Bullet → 0.241" Mandrel)