-21 %

KOMBI | Valve Powerkit.50 + FIRING BOLT incl. PIN | HDP50 + GEN.2 | 25J+

62.90 € 49.95 €

142

ID: 9114867

Safe shopping with Gunfinder

Our AI-supported provider identity verification makes Gunfinder the safest online marketplace. Learn more

About the seller

HomeDefence-24 GmbH

Retailer

323 offers

Details

Original language

German

Category

Acquisition authorization

Required - What am I allowed to buy?

Calibers

.50

Condition

New

Location

🇩🇪 -

Availability

Available

Timeliness

This offer is based on an offer mirroring, where the offer data was transferred from a shop, merchant, or external marketplace to us. Please note that temporary price discrepancies may occur due to possible delays in data transmission.

Source: HomeDefence-24 GmbH
Last updated: before 1 day

Description

Note: The item location is abroad. Please note that this may affect delivery conditions, shipping times, and/or the purchasing process.

The conversion is easier since the PIN is already integrated into the FIRING BOLT. It just needs to be replaced.
Valve Powerkit.50

suitable for the HDP50 as well as GEN.2 version (only at 7.5J)

no valve needed in the pressure chamber

Removal of the valve (throttle in the pressure chamber) afterwards:

Valve: press the insert into the pressure chamber with the included screw

Material: stainless steel, for better sliding and protection of the sealing ring

Increases the power to over 25 Joules+ *

longer valve opening time, larger gas volume
reduced cool down effect

*temperature dependent
+
FIRING BOLT including Powerkit PIN

suitable for the HDP50 and GEN.2 version
Material: steel, black blued

WARNING: Since this is blued steel, the product should be oiled regularly. To maintain corrosion protection. ... (Show description in original language)

Der Umbau ist einfacher, da der PIN bereits im FIRING BOLT integriert ist. Es muss nur noch ausgetauscht werden.
Valve Powerkit.50

geeignet für die HDP50 sowie GEN.2 Version (nur bei 7,5J)

kein Ventil mehr in der Druckkammer benötigt

Herausnahme des Ventil´s (Drossel in der Druckkammer) im Anschluss:

Valve: den Einsatz in die Druckkammer mit der beiliegenden Schraube einpressen

Material: Edelstahl, für besseres gleiten und Schonung des Dichtrings

Erhöht die Leistung auf über 25 Joule+ *

längere Ventil-Öffnungszeit, größere Gasmenge
verringerter Cool Down Effekt

*temperaturabhängig
+
FIRING BOLT inkl. Powerkit PIN

geeignet für die HDP50 und GEN.2 Version
Material: Stahl, schwarz brüniert

ACHTUNG: Da es sich hierbei um brüniertes Stahl handelt, sollte das Produkt immer wieder geölt werden. Damit der Korrosionsschutz erhalten bleibt. ...