RCBS Full Length 2-Die Set / Case Sizing Die Set 8x57 Mauser Gr. A

RCBS Full Length 2-Die Set / Case Sizing Die Set 8x57 Mauser Gr. A

71.95 €

64668 Rimbach, Germany

ID: 8775811

This offer is currently not available.

Safe shopping with Gunfinder

Our AI-supported provider identity verification makes Gunfinder the safest online marketplace. Learn more

About the seller

Wiederladewelt24

Retailer

10,474 offers

Details

Original language

German

Brand

Mauser

Category

Calibers

8x57 IRS

Condition

New

Location

🇩🇪 64668 Rimbach, Germany

Availability

Not available

Timeliness

This offer is based on an offer mirroring, where the offer data was transferred from a shop, merchant, or external marketplace to us. Please note that temporary price discrepancies may occur due to possible delays in data transmission.

Source: Wiederladewelt24
Last updated: before about 13 hours

Description

Note: The item location is abroad. Please note that this may affect delivery conditions, shipping times, and/or the purchasing process.

RCBS Full Length 2-Die Set / Case Sizing Die Set 8x57 Mauser Gr. A
The 2-piece RCBS precision die sets consist of a full-length sizing die and a bullet seating die.
These dies fit all common presses with a 7/8”x14 standard thread. The seating die with a universal standard seating plug is suitable for all common bullet shapes and can also be used for crimping the finished cartridge afterward. Please always perform this work as a separate step. All bottle cases must generally be lubricated for full-length sizing! We recommend lightly lubricating the inside of the case neck with a good, water-soluble sizing lubricant (no graphite!) to protect the case material.
The dies are delivered complete with a decapping pin and thread rings in a sturdy plastic box.
Please always order the appropriate shell holder separately. (Show description in original language)

RCBS Full Length 2-Die Set / Hülsenkalibriermatrizensatz 8x57 Mauser Gr. A
Die 2-teiligen RCBS Präzisionsmatrizensätze bestehen aus einer Vollkalibriermatrize und einer Geschosssetzmatrize.
Diese Matrizen passen in alle gängigen Pressen mit 7/8”x14 Standardgewinde. Die Setzmatrize mit einem universellen Standardsetzstempel ist passend für alle gängigen Geschossformen und kann zudem auch zum nachträglichen Crimpen der fertigen Patrone verwendet werden. Bitte diese Arbeit immer als separaten Schritt durchführen. Alle Flaschenhülsen müssen grundsätzlich zum Vollkalibrieren gefettet werden! Wir empfehlen, auch den Hülsenhals innen leicht mit einem guten, wasserlöslichen Kalibrierfett (kein Graphit!) zu fetten, um das Hülsenmaterial zu schonen.
Die Matrizen werden komplett mit Ausstoßer und Gewinderingen in einer stabilen Kunststoffbox geliefert.
Den passenden Hülsenhalter ordern Sie bitte immer separat.