Note:
The item location is abroad. Please note that this may affect delivery conditions, shipping times, and/or the purchasing process.
Lee Bulge Buster Kit special die for removing case bulges
With this kit, you can easily remove the bulges at the base of your rimless pistol cases in conjunction with a LEE Factory Crimp Die. The kit includes a catch container with an adapter for the Factory Crimp Die as well as the punch for pressing the cases. The respective LEE Factory Crimp Die is not included and must be ordered separately.
suitable for .380 ACP / 9 mm short, .357 SIG, .40 S&W (except for Glock firearms), 10 mm Auto, .400 Cor-Bon, .45 GAP, .45 ACP, and .45 Win Mag.
Not suitable for 9 mm Para
Does not replace the normal sizing die!
Note from Lee for Glock shooters:
Glock Cases: We do not recommend "fixing" cases fired in pistols with unsupported chambers, because there is no way to make them safe once they have bulged. The case wall is thinned where it bulges, and resizing the outside of the case back down to the correct diameter does not restore the case back to its original thickness. If this case is fired in a pistol with an unsupported chamber again, and this thinned section of brass happens to line up with the unsupported part of the chamber, there is a high probability that the case will rupture.
(Show description in original language)
Lee Bulge Buster Kit Spezialmatrize zum Entfernen der Hülsenaufbauchung
Mit diesem Kit können Sie in Verbindung mit einer LEE Factory Crimpmatrize die Beulen im Bodenbereich Ihrer randlosen Pistolenhülse leicht entfernen. Zum Kit gehören ein Auffangbehälter mit Adapter für die Factory Crimpmatrize sowie der Pressstempel zum Einpressen der Hülsen. Die jeweilige LEE Factory Crimpmatrize gehört nicht zum Lieferumfang und muss separat bestellt werden.
geeignet für .380 ACP / 9 mm kurz, .357 SIG, .40 S&W (außer für Glock Waffen), 10 mm Auto, .400 Cor-Bon, .45 GAP, .45 ACP und .45 Win Mag.
Nicht geeignet für 9 mm Para
Ersetzt nicht die normale Kalibriermatrize!
Hinweis von Lee für Glockschützen:
Glock Cases: We do not recommend "fixing" cases fired in pistols with unsupported chambers, because there is no way to make them safe once they have bulged. The case wall is thinned where it bulges, and resizing the outside of the case back down to the correct diameter does not restore the case back to its original thickness. If this case is fired in a pistol with an unsupported chamber again, and this thinned section of brass happens to line up with the unsupported part of the chamber, there is a high probability that the case will rupture.
A-TEC
AEA Airguns
AKAH
ASG
Aimpoint
Alpen Optics
Alpha Industries
Anschütz
Antonio Zoli
Ares
B&T Schalldämpfer
Baikal
Ballistol
Balzer
Barbour
Barnes
Barnett
Benelli
Beretta
Bergara
Blaser
Brandit
Bremer Tresor
Brenneke
Classified ad
