Lee Bulge Buster Kit special die for removing case bulges

Lee Bulge Buster Kit special die for removing case bulges
With this kit, you can easily remove the bulges at the base of your rimless pistol cases in conjunction with a LEE Factory Crimp Die. The kit includes a catch container with an adapter for the Factory Crimp Die as well as the punch for pressing the cases. The respective LEE Factory Crimp Die is not included and must be ordered separately.

suitable for .380 ACP / 9 mm short, .357 SIG, .40 S&W (except for Glock firearms), 10 mm Auto, .400 Cor-Bon, .45 GAP, .45 ACP, and .45 Win Mag.
Not suitable for 9 mm Para

Does not replace the normal sizing die!

Note from Lee for Glock shooters:

Glock Cases: We do not recommend "fixing" cases fired in pistols with unsupported chambers, because there is no way to make them safe once they have bulged. The case wall is thinned where it bulges, and resizing the outside of the case back down to the correct diameter does not restore the case back to its original thickness. If this case is fired in a pistol with an unsupported chamber again, and this thinned section of brass happens to line up with the unsupported part of the chamber, there is a high probability that the case will rupture.