Note:
The item location is abroad. Please note that this may affect delivery conditions, shipping times, and/or the purchasing process.
The HydraCell Lantern Combo black reliably provides you with light through the lantern or the included floodlight. The integrated energy cell of the Cube Lantern generates its own power using two easily replaceable anode energy plates. These are activated simply by filling the integrated tank with saltwater. The HydraCell lantern can charge and power mobile phones or other USB-chargeable small devices in emergencies, when there is no power grid or during power outages. It is important to note that the lantern is not intended as a classic charger, but only for occasional situational emergency charges. It features a standard USB output for charging as well as a 2.6 mm DC charging output for powering a variety of small devices, such as the included LED floodlight. Instructions: 1. Release the lantern head by pressing the two side clips and pulling it upwards to remove. 2. Turn the salt filling cap clockwise while lifting it. 3. Fill both internal chambers evenly with an 8% salt solution up to the half-round recess of the chamber divider. 4. Reinsert the salt filling cap by turning it. Rinse the surface with fresh water. Dry with a cloth. Place the lantern head back on and press until the clips snap into place. - Energy cell: HydraCell Cube energy cell Package contents: - HydraCell Cube Lantern - 2-piece set (2 pieces of anode energy plates) - HydraCell floodlight Runtime: - Hand charges per plate set: 6 to 8 (depending on the charging capacity of the respective mobile phone batteries) - Light duration per plate set: 500 hours (bright setting), 100 hours (dim setting) - Light duration Cube energy cell: 900 hours (bright setting), 1800 hours (dim setting) Dimensions: - Cube Lantern: 238 x 95.5 x 94 mm - Floodlight: 84 x 84 x 36 mm
(Show description in original language)
Die HydraCell Laterne Lantern Combo schwarz versorgt Dich über die Laterne oder das bereits beigepackte Flutlicht zuverlässig mit Licht. Die integrierte Energiezelle der Cube Lantern generiert ihren eigenen Strom mittels zwei einfach ersetzbarer Anoden-Energieplatten. Diese werden einfach durch das Befüllen des integrierten Tanks mit Salzwasser aktiviert. Die HydraCell Laterne kann in Notfällen, bei nicht vorhandenem Stromnetz oder bei Stromausfällen, Handys oder andere USB-ladefähige Kleingeräte laden und mit Energie versorgen. Dabei gilt es zu beachten, dass die Laterne nicht als klassisches Ladegerät, sondern nur für gelegentliche situationsbedingte Notladungen vorgesehen ist. Sie verfügt über einen Standard USB-Ausgang zum Laden sowie über einen 2,6 mm DC-Lade-Ausgang für die Versorgung einer Vielzahl von kleinen Geräten, wie zum Beispiel dem beigepackten LED-Flutlicht. Anleitung: 1. Laternenkopf durch das Drücken der beiden seitlichen Halteclips lösen und nach oben ziehend entfernen. 2. Salzfüllkappe im Uhrzeigersinn drehen und zugleich anheben. 3. Mit einer 8%-igen Salzlösung beide internen Kammern gleichmäßig bis zur halbrunden Aussparung der Kammern-Trennwand füllen. 4. Salzfüllkappe durch Drehen wieder einsetzen. Die Oberfläche mit frischem Wasser abspülen. Mit einem Tuch trocknen. Laternenkopf aufsetzen und durch Drücken bis zum Einrasten der Halteclips befestigen. - Energiezelle: HydraCell Cube Energiezelle Lieferumfang: - HydraCell Cube Lantern - 2er Set (je 2 Stück) Anoden-Energieplatten) - HydraCell Flutlicht Laufzeit: - Handladungen pro Platten-Set: 6 bis 8 (abhängig von Ladekapazität der jeweiligen Handybatterien/-akkus) - Leuchtdauer pro Platten-Set: 500 Stunden (helle Einstellung), 100 Stunden (schwache Einstellung) - Leuchtdauer Cube Energiezelle: 900 Stunden (helle Einstellung), 1800 Stunden (schwache Einstellung) Maße: - Cube Lantern: 238 x 95,5 x 94 mm - Flutlicht: 84 x 84 x 36 mm