BT65 Gen. 2 CAL Atlas Bipod with 2 screw clamp for Picatinny, image 1 of 12

BT65 Gen. 2 CAL Atlas Bipod with 2 screw clamp for Picatinny, image 2 of 12

BT65 Gen. 2 CAL Atlas Bipod with 2 screw clamp for Picatinny, image 3 of 12

BT65 Gen. 2 CAL Atlas Bipod with 2 screw clamp for Picatinny, image 4 of 12

BT65 Gen. 2 CAL Atlas Bipod with 2 screw clamp for Picatinny, image 5 of 12

BT65 Gen. 2 CAL Atlas Bipod with 2 screw clamp for Picatinny, image 6 of 12

BT65 Gen. 2 CAL Atlas Bipod with 2 screw clamp for Picatinny, image 7 of 12

BT65 Gen. 2 CAL Atlas Bipod with 2 screw clamp for Picatinny, image 8 of 12

BT65 Gen. 2 CAL Atlas Bipod with 2 screw clamp for Picatinny, image 9 of 12

BT65 Gen. 2 CAL Atlas Bipod with 2 screw clamp for Picatinny, image 10 of 12

BT65 Gen. 2 CAL Atlas Bipod with 2 screw clamp for Picatinny

329.95 €

No permit required (18+)

8244 Schäffern, Austria

ID: 10138175

Shop safely with Gunfinder

Our AI-powered seller identity verification makes Gunfinder the safest marketplace online. Learn more

About the seller

Alpineoptics

Dealer

968 listings

Details

Original language

German

Category

Condition

New

Location

🇦🇹 8244 Schäffern, Austria

Availability

In stock

Freshness

This listing is based on a mirrored offer, where the listing data was synced to us from a shop, dealer, or external marketplace. Please note that temporary price discrepancies may occur due to possible delays in data transmission.

Source: Alpineoptics
Last updated: about 4 hours ago

Description

Note: The item is located abroad. Please note that delivery conditions, shipping times, and/or the purchase process may differ.

The CAL (Cant And Loc) Atlas Bipods were developed for shooters that do not desire the Panning feature. The BT65 mounts directly to any 1913 style Picatinny rail via the low profile 2 screw clamp. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Available in black only. We chose to support a legend in the shooting sports by using the original KMW “Pod-Loc™.” Read how to adjust the Pod-Loc™ lever below. Height Range: 12,45 - 23,37cm (16,26cm at 90°) 4.9 - 9.2" (6.4” at 90°) Preloaded Cant: 45 degrees Position Button 1,27cm (0.5") diameter 5 leg positions: 0, 45, 90, 135 & 180 degrees Non-Rotating Legs: outer leg does not rotate around inner leg Larger, stronger inner legs Weight: 365 grams (12.87 ounces) Footprint: 22,86 - 31,75cm (9–12.5") Using the KMW "Pod-Loc™" With the CAL bipod mounted to your rifle, you will be able to lock and un-lock the canting motion by rotating the Pod-Loc™ lever. Turn clockwise to lock and counter clockwise to un-lock. The Pod-Loc™ lever position can be adjusted for positioning by pulling the lever directly away from the body of the CAL and rotating to desired position. This positioning can be repeated until optimal position is achieved. More Information & Accessories Independent, intentional and non-orientated leg positioning allows either hand to move leg into any of the five leg positions Solid leg positions allows shooter to load the bipod at the 45 and 90 degree positions. Non-orientated leg length adjustment done by either hand: Outer leg slides on the Inner leg locating on any of five positions 1,9cm (¾”) apart Optional 7,62cm (3”) Leg Extensions to increase height Standard soft, durable Rubber feet that are suitable for many surfaces Optional interchangeable Ski, Spike, Cleat and Spiked Cleat feet easily swapped in the field with the press of a stainless steel plunger with a bullet tip Optional mounting systems available for Accuracy International and Sako rifles

BT65 Gen. 2 CAL Atlas Bipod with 2 screw clamp for Picatinny

Alpineoptics

Details

Freshness

Description

You might also like

Buying Service

Top Auctions

Buying Service

Sponsored listings