Note:
The item is located abroad. Please note that delivery conditions, shipping times, and/or the purchase process may differ.
Tactical/military use – High light output – Very compact size – Convenient integrated charging system – Strong spotlight – Practical, intuitive brightness controls. Thanks to Strobe Ready technology, simply press and hold the secondary button (Mode) to activate strobe mode at any time.
KEY FEATURES:
* Nitecore Italia Italian warranty: flashlight covered for 5 years – battery covered for 12 months
* Integrated charging system for Li-ion batteries via the Micro-USB-C port on the head
* NITECORE 21700 rechargeable battery (NL2140i, 4,000mAh) included
* Uses a Luminus SST-40-W LED for a maximum output of 1800 lumens
* Maximum center-beam intensity of 21100cd. and a maximum range of 290 meters
* Glass and reflectors with anti-reflective treatments, crystal coating and PDOT (Precision Digital Optics Technology)
* Integrated power indicator showing the battery’s remaining charge and voltage
* Made from solid aircraft-grade aluminum alloy with military-spec anodizing
* Waterproof and submersible to IP68 (up to 2m deep for 30min)
* Impact- and drop-resistant from heights of up to 1m.
———————————————————————————————————————————————–
Original Nitecore remote switch, used by replacing the flashlight’s tail cap; ideal for use with the flashlight mounted under a firearm for hunting, tactical or airsoft use.
The remote consists of two parts: an aluminum tail cap that replaces the flashlight’s original cap, and a detachable remote cable that connects via a USB-C plug. Once connected, it allows both momentary activation of the light (the light turns on when you press and hold the pad and turns off when you release it) and strobe activation via a dedicated button. It also allows the light to be switched on continuously, with the option to adjust its brightness afterward.
The aluminum tail cap also has a standard integrated power button on the rear, allowing you to use the flashlight normally (turning it on and off), but not to select brightness levels or activate STROBE.
Tail cap diameter: 28.6mm
Total cable length: 307mm
Compatible only with the following models:
P10i, P20i and P30i
(Show description in original language)
Impiego tattico/militare – Elevata potenza luminosa – Dimensioni molto compatte – Comodità del sistema di ricarica integrato – Luce con forte spot – Praticità ed immediatezza dei comandi di selezione luminosa. Grazie alla tecnologia Strobe Ready, basta premere e tenere premuto il pulsante secondario (Mode) per attivare la modalità strobo in qualsiasi momento.
CARATTERISTICHE CHIAVE:
* Garanzia Italiana Nitecore Italia: Torcia garantita 5 anni – Batteria garantita 12 mesi
* Sistema di ricarica integrato per batterie Li-ion tramite porta Micro-USB-C posta sulla testa
* Batteria NITECORE 21700 ricaricabile (NL2140i, 4,000mAh) inclusa nella confezione
* Utilizza un LED Luminus SST-40-W per una potenza d’uscita massima di 1800 lumens
* Massima intensità luminosa nel punto centrale di 21100cd. e portata massima di 290 metri
* Vetri e parabole con trattamenti antiriflesso, crystal coating e con PDOT (Precision Digital Optics Technology)
* Potenziometro integrato con spia che indica la carica residua e voltaggio residuo della batteria
* Costruita in solida lega d’alluminio aeronautica con anodizzazione a specifiche militari
* Impermeabile ed immergibile IP68 (fino a 2m di profondità per 30min)
* Resistente ad impatti e a cadute fino ad un massimo di 1m. di altezza
———————————————————————————————————————————————–
Comando di accensione remota originale Nitecore da utilizzare sostituendo il tappo posteriore della propria torcia; ideale da utilizzare con la torcia montata sotto un’arma da fuoco per uso venatorio, tattico o per soft-air.
Il remoto è composto da due parti: un tappo posteriore in alluminio che va montato al posto del tappo originale della torcia ed un cavo remoto amovibile che si aggancia tramite plug USB-C. Una volta innestato permette sia l’accensione temporanea della luce (la luce è emessa premendo e tenendo premuto il pad, si spegne rilasciandolo) sia la funzione strobo tramite tasto dedicato; permette inoltre l’accensione fissa della luce con successiva possibilità di variarne la potenza luninosa.
Posteriormente il tappo di alluminio ha anche un pulsante di accensione standard integrato che permette di utilizzare normalmente la torcia (accensione e spegnimento), ma che non permette di selezionarne le potenze luminose o la luce STROBO.
Diametro tappo: 28.6mm
Lunghezza Totale Cavo: 307mm
Compatibile unicamente con i modelli:
P10i, P20i e P30i