RCBS Full Length 2-Die Set / Case Sizing Die Set .222 Rem. Mag. Size A

71.95 €

64668 Rimbach, Germany

ID: 8776239

Safe shopping with Gunfinder

Our AI-supported provider identity verification makes Gunfinder the safest online marketplace. Learn more

About the seller

Wiederladewelt24

Retailer

10,466 offers

Details

Original language

German

Category

Calibers

.222 Remington Magnum

Condition

New

Location

🇩🇪 64668 Rimbach, Germany

Availability

Available

Timeliness

This offer is based on an offer mirroring, where the offer data was transferred from a shop, merchant, or external marketplace to us. Please note that temporary price discrepancies may occur due to possible delays in data transmission.

Source: Wiederladewelt24
Last updated: before about 1 hour

Description

Note: The item location is abroad. Please note that this may affect delivery conditions, shipping times, and/or the purchasing process.

RCBS Full Length 2-Die Set / Case Sizing Die Set .222 Rem. Mag. Size A
The 2-piece RCBS precision die sets consist of a full-length sizing die and a bullet seating die. These dies fit all common presses with a 7/8x14 standard thread. The seating die with a universal standard seating stem is suitable for all common bullet shapes and can also be used for crimping the finished cartridge afterward. Please always perform this work as a separate step. All bottle neck cases must be lubricated for full-length sizing! We also recommend lightly lubricating the inside of the case neck with a good, water-soluble sizing lubricant (no graphite!) to protect the case material. The dies are delivered complete with a decapper and thread rings in a sturdy plastic box. Please always order the appropriate shell holder separately. (Show description in original language)

RCBS Full Length 2-Die Set / Hülsenkalibriermatrizensatz .222 Rem. Mag. Gr. A
Die 2 teiligen RCBS Präzisionsmatrizensätze bestehen aus einer Voll-Kalibriermatrize und einer Geschosssetzmatrize. Diese Matrizen passen in alle gängigen Pressen mit 7/8x14 Standardgewinde. Die Setzmatrize mit einem universellen Standartsetzstempel ist passend für alle gängigen Geschoßformen und kann zudem auch zum nachträglichen Crimpen der fertigen Patrone verwendet werden. Bitte diese Arbeit immer als separaten Schritt durchführen. Alle Flaschenhülsen müssen grundsätzlich zum Vollkalibrieren gefettet werden! Wir empfehlen auch den Hülsenhals innen leicht mit einem guten, wasserlöslichen Kalibrierfett (kein Graphit!) zu fetten, um das Hülsenmaterial zu schonen. Die Matrizen werden komplett mit Ausstoßer und Gewinderingen in einer stabilen Kunststoffbox geliefert. Den passenden Hülsenhalter ordern Sie bitte immer separat.