Achtung:
Your browser is outdated. Please note that Gunfinder may not work properly in some places. You should update your browser as soon as possible. Learn more here!
This listing is based on a mirrored offer, where the listing data was synced to us from a shop, dealer, or external marketplace. Please note that temporary price discrepancies may occur due to possible delays in data transmission.
Source
VDB
Last updated
1 day ago
Description
Note:
The item is located abroad. Please note that delivery conditions, shipping times, and/or the purchase process may differ.
Magnetic handgun holder for freely hanging storage of handguns with a maximum slide width of 33 mm and a maximum weight of 1 kg. The holder is mounted at any point on the back wall of the gun cabinet, and the handgun is hung on the magnets. Both the adhesion to the back wall and to the weapon is ensured by strong neodymium magnets. No additional securing is necessary. The back is covered with non-slip foam rubber, and the contact points with the weapon are covered with robust hook-and-loop pads. These covering materials may wear out over time and with frequent use - replacements are available at low cost in our shop. A cutout in the back wall allows for use on safe walls equipped with 10 mm high "metal brackets" for conventional holders. Use with red dots and sights at suppressor height is easily possible, provided the distance between the front sight and the red dot is at least 78 mm. IMPORTANT: Please make sure to compare the dimensions in the product images with your weapon! WARNING: With unfavorable weight distribution (heavy grip), long barrels, or rounded tops of the weapon (e.g., some revolvers), there is a risk that the weapon may not hold reliably and could come loose. Please test the holder before permanent use, as otherwise there is a risk of injury and property damage. This holder is not suitable for these special applications, and use for this purpose is expressly at your own risk. Material: PETG, health-safe, robust, chemical-resistant, heat-resistant up to 80 °C, recyclable. Manufacturing: Since the production is carried out layer by layer (0.2 mm) in the FDM process, it is normal for this to be partially visible on the surfaces. The price refers to a handgun holder without handgun or other accessories. Product safety information: Manufacturer: Armorum / Julius Bitterich, Schlossgartenstr. 18, 75031 Eppingen, GERMANY, E-Mail: [email protected] EU Responsible: Armorum / Julius Bitterich, Schlossgartenstr. 18, 75031 Eppingen, GERMANY, E-Mail: [email protected]
(Show description in original language)
Magnetische Kurzwaffenhalterung zur frei hängenden Lagerung von Kurzwaffen mit einer maximalen Schlittenbreite von 33 mm und einem Maximalgewicht von 1 kg.Die Halterung wird an einer beliebigen Stelle der Rückwand des Waffenschranks angebracht und die Kurzwaffe an die Magneten gehängt. Sowohl die Haftung an der Rückwand, als auch an der Waffe wird durch starke Neodymmagneten sichergestellt. Es ist keine weitere Sicherung notwendig. Die Rückseite ist mit rutschhemmendem Moosgummi verkleidet, und die Kontaktstellen mit der Waffe sind mit robusten Flauschklettpads beklebt. Diese Verkleidungsmaterialien können mit der Zeit und häufiger Nutzung verschleißen - Ersatz gibt es kostengünstig bei uns im Shop. Eine Ausspaarung in der Rückwand ermöglicht die Nutzung an Tresorwänden, die mit 10 mm hohen "Metallaschen" für konventionelle Halter ausgestattet sind.Die Nutzung mit Reddot und Visieren in Schalldämpferhöhe ist problemlos möglich, sofern der Abstand zwischen Korn und Reddot mindestens 78 mm beträgt.WICHTIG: Bitte gleichen Sie unbedingt die Maße in den Produktbildern mit Ihrer Waffe ab!WARNUNG: Bei ungünstiger Gewichtsverteilung (schweres Griffstück), langen Läufen oder runder Oberseite der Waffe (z.B. manche Revolver) besteht die Gefahr, dass die Waffe nicht zuverlässig hält und sich lösen kann. Halterung bitte unbedingt vor dauerhafter Benutzung testen, da sonst Verletzungs- und Sachschadengefahr besteht. Für diese Spezialanwendungen ist die Halterung nicht geeignet und eine Benutzung dafür geschieht ausdrücklich auf eigene Gefahr.Material: PETG, gesundheitlich unbedenklich, robust, chemikalienbeständig, hitzebeständig bis 80 °C, recyclingfähigHerstellung: Da die Fertigung im FDM-Verfahren schichtweise (0,2 mm) durchgeführt wird ist es normal, dass dies auf den Oberflächen teilweise erkennbar ist.Der Preis bezieht sich auf eine Kurzwaffenhalterung ohne Kurzwaffe oder sonstiges Zubehör. Produktsicherheitshinweise:Hersteller: Armorum / Julius Bitterich, Schlossgartenstr. 18, 75031 Eppingen, GERMANY, E-Mail: [email protected]: Armorum / Julius Bitterich, Schlossgartenstr. 18, 75031 Eppingen, GERMANY, E-Mail: [email protected]
With your consent, we recognize your browser on your next visit and see what hunters and sport shooters are really looking for. This helps us improve search and listings a little more every day and show you more of what interests you. Your data stays with us: we don't share it and we don't sell it.
You can change your choice at any time via the Cookie Settings link in the footer. What we store is described in our Privacy Policy.
Cookie Settings
Login, watchlist, language, and security features. These keep Gunfinder working for you and are always active.
If you agree, we'll recognize your browser on your next visit and better understand what hunters and shooters are really looking for. This helps us improve search and listings a little more every day. To do this, we store a random identifier on your device, valid for two years and containing no personal information. Without your consent, we only count anonymously. Use the next toggle to choose whether your profile may also influence what you see.
If you agree, we'll use your profile to show you offers and content on Gunfinder that match your interests: more of what you actually care about, less random stuff. Nothing gets hidden. This requires your consent to statistics, since without it there's no profile. As a quality check, a small number of users who consent will randomly see the non-personalized view. Your profile stays with us.
Cookies are disabled
Your browser doesn't allow cookies. We can't save your choice and won't ask again — only what's needed to run the site will be active. Features like login or watchlist require cookies and will remain unavailable until then.