Note:
The item location is abroad. Please note that this may affect delivery conditions, shipping times, and/or the purchasing process.
The SteriPen Water Purifier Classic 3 removes bacteria, 99.9% protozoa (including Giardia and Cryptosporidium), and viruses using ultraviolet light (UV-C rays). The usage is incredibly simple and allows you to purify water from almost any source with clear water. The Classic 3 water purifier has been the most widely used UV water purifier for over 15 years. The user-friendly LED display shows the treatment volume as well as the status of the UV lamp and battery charge. Use the SteriPen Classic 3 only in clear water, as cloudy, sediment-laden water can impair effectiveness. Application: 1. Remove the cap. 2. Press the activation button: 1 x for 1 liter, 2 x for 500 ml. 3. Hold the lamp in the clear water until the water sensor pins are completely covered. 4. Stir the water until the green LED blinks. The water is now drinkable. - Water source: tap water, clear water - Number of people: 1, 2-5 - Effective against: bacteria, protozoa, cysts, viruses - Flow rate: 500 ml = 48 seconds / 1 L = 90 seconds - Output (L/click): 2 clicks = 500 ml, 1 click = 1 L - Applications per battery charge: approx. 20/80-100/150 - Lifespan: 8000 activations - Battery: 4 x AA
(Show description in original language)
Der SteriPen Wasserentkeimer Classic 3 entfernt mittels ultraviolettem Licht (UV-C Strahlen) Bakterien, 99,9% Protozoen (inkl. Giardia und Kryptosporidien) und Viren. Die Benutzung ist denkbar einfach und ermöglicht Dir das Aufbereiten von Wasser aus nahezu jeder Quelle mit klarem Wasser. Der Wasserentkeimer Classic 3 ist seit über 15 Jahren der am meisten genutzten UV-Wasserentkeimer. Die benutzerfreundliche LED-Anzeige zeigt das Behandlungsvolumen sowie den Zustand der UV-Lampe und der Batterieladung an. Verwende den SteriPen Classic 3 nur in klarem Wasser, da trübes, sedimenthaltiges Wasser die Wirksamkeit beeinträchtigt. Anwendung: 1. Entferne die Verschlusskappe. 2. Drücke den Aktivierungsknopf: 1 x für 1 Liter, 2 x für 500 ml. 3. Halte die Lampe ins klare Wasser, bis die Wassersensorstifte vollständig bedeckt sind. 4. Rühre das Wasser so lange um. bis die grüne LED blinkt. Das Wasser ist jetzt trinkbar. - Wasserherkunft: Leitungswasser, klares Wasser - Anzahl Personen: 1, 2-5 - Wirksam gegen: Bakterien, Protzoen, Zysten, Viren - Durchfluss: 500 ml = 48 Sekunden / 1 L = 90 Sekunden - Output (L/click): 2 Klick = 500 ml, 1 Klick = 1 L - Anwendung pro Batterieladung: ca. 20/80-100/150 - Lebensdauer: 8000 Aktivierungen - Batterie: 4 x AA