Achtung:
Your browser is outdated. Please note that Gunfinder may not work properly in some places. You should update your browser as soon as possible. Learn more here!
This listing is based on a mirrored offer, where the listing data was synced to us from a shop, dealer, or external marketplace. Please note that temporary price discrepancies may occur due to possible delays in data transmission.
Source
Odos UK
Last checked with the dealer
about 21 hours ago
Description
Note:
The item is located abroad. Please note that delivery conditions, shipping times, and/or the purchase process may differ.
The RPP Flyweight lever action Loading Gate greatly reduces the effort required to stoke your Rossi 95 It's a masterfully tuned, competition grade part right out of the gate. SASS approved.
Starting with a massive reduction in spring weight, the RPP gate requires only about 1.5 lbs. of force to open fully, while the factory loading gate can require in excess of 5 lbs.
Next, we redesigned the lever-action loading gate to offer substantially more clearance for cartridges, further reducing load effort. This is a significant benefit when loading fat, straight wall ammo like the Marlin 444. In fact, during testing we discovered that we could load a .444 dummy through the gate of a typical Marlin 336 .30-30, without benefit of the Model 444's magazine tube clearance bulge. That's first class leg room!
Finally, we paid very careful attention to the inside "feed lip" area of the gate, optimizing geometry to ease gate opening against an on-deck round, and offer smooth feeding, with perfect case head control. With every gate precisely CNC machined from solid bar stock and hand polished, consistent results are assured.
Material is 7075-T6 aluminum, the strongest grade available. Engineered for highly stressed air frames, 7075 has extraordinary fatigue strength for thousands of flex cycles without failure. When anodized, it has a surface hardness exceeding hardened steel, for excellent wear properties.
The Firearm Blog Review: Ranger Point Precision Cloverleaf Peep Sights + Flyweight Loading Gate Springs
RPP Flyweight Marlin Loading Gate Features:
* Spring weight reduced by up to 70%
* No tuning required, saving you time and hassle
* Greatly increased cartridge clearance
* No knife sharp edges
* Easy loading and smooth, reliable feeding
* Precisely machined from 7075-T6 aluminum billet and hard anodized for extreme durability
* Available in black, gold, or clear anodized finish (silver color to closely match stainless rifles)
* 10-15 minute installation time
* Single Action Shooting Society (SASS) approved
INSTALLATION
A couple of good screwdrivers is all that's needed.
The gun will need to be partially disassembled - just go slow, and remember that each screw needs to return to it's original home, so get a piece of cardboard box, draw an approximation of the receiver on it, and poke a hole in your drawing where each screw can rest until reassembly.
1) Clear the rifle & ensure the chamber and magazine are EMPTY.
2) Unscrew/remove the tang screw from the upper/rear receiver tang, and pull off the buttstock to the rear.
3) Partially open bolt/lever, remove lever pivot screw and slide lever out of the bottom of the receiver (no need to remove bolt)
4) De-cock the hammer with the safety disengaged. Push forward on the hammer spring bridge and pull or push out one side of its groove. This will free the hammer spring
5) Remove hammer pivot screw, bottom trigger plate screw and side support screws to free the trigger plate from the receiver.
6) Remove the trigger plate / lower tang from the bottom of the receiver (some gentle prying may be needed).
7) Pull the locking lug out of the bottom of the receiver and swing the carrier out of the receiver (no need to remove the carrier pivot screw)
8) Unscrew the loading gate spring (1” behind he loading gate opening) and install the new gate and screw it in
With your consent, we recognize your browser on your next visit and see what hunters and sport shooters are really looking for. This helps us improve search and listings a little more every day and show you more of what interests you. Your data stays with us: we don't share it and we don't sell it.
You can change your choice at any time via the Cookie Settings link in the footer. What we store is described in our Privacy Policy.
Cookie Settings
Login, watchlist, language, and security features. These keep Gunfinder working for you and are always active.
If you agree, we'll recognize your browser on your next visit and better understand what hunters and shooters are really looking for. This helps us improve search and listings a little more every day. To do this, we store a random identifier on your device, valid for two years and containing no personal information. Without your consent, we only count anonymously. Use the next toggle to choose whether your profile may also influence what you see.
If you agree, we'll use your profile to show you offers and content on Gunfinder that match your interests: more of what you actually care about, less random stuff. Nothing gets hidden. This requires your consent to statistics, since without it there's no profile. As a quality check, a small number of users who consent will randomly see the non-personalized view. Your profile stays with us.
Cookies are disabled
Your browser doesn't allow cookies. We can't save your choice and won't ask again — only what's needed to run the site will be active. Features like login or watchlist require cookies and will remain unavailable until then.