Achtung: Your browser is outdated. Please note that Gunfinder may not work properly in some places. You should update your browser as soon as possible. Learn more here!

BuckRail MOD Stock Folding Stock Adapter for R-1 Stock

≈ $46
Price at the dealer: £35. Converted at the ECB rate as of November 16, 2026.
No permit required (18+)
NG22 9ZD Kirton, United Kingdom
0
ID: 12100153
Purchase from outside the EU: The firearm goes through an importer in your country, the dealer handles the export. How buying from Europe works
Shop safely with Gunfinder
Our AI-powered seller identity verification makes Gunfinder the safest marketplace online. Learn more
About the seller
Vector Air
Dealer

Details

Category
Condition
New
Location
🇬🇧 NG22 9ZD Kirton, United Kingdom
Availability
In stock

Freshness

This listing is based on a mirrored offer, where the listing data was synced to us from a shop, dealer, or external marketplace. Please note that temporary price discrepancies may occur due to possible delays in data transmission.
Source
Vector Air
Last checked with the dealer
about 19 hours ago

Description

Note: The item is located abroad. Please note that delivery conditions, shipping times, and/or the purchase process may differ.
The BuckRail MOD Stock Folding Stock Adapter is one of the most requested additions since we introduced BuckRail to the UK market. Designed specifically for the BuckRail MOD Stock (R-1), it adds a left-folding function without requiring you to replace the stock itself.
 
The adapter fits between the R-1 stock clamp and stock body, allowing the stock to fold to the left-hand side of the rifle. This makes the R-1 considerably more compact for storage and transport, while retaining the same BuckRail MOD Stock once the stock is folded back into its normal position.
 
The adapter can be used with the standalone BuckRail R-1 stock or as part of the BuckRail DRS Tactical Stock configuration, including the R-1 fitted to the FX DRS Tactical.
 
A locking button secures the stock in the open position during normal use. To fold the stock, simply press the button and rotate the stock to the left. There is no locking position when folded, so the stock is free to move once folded and should be considered a storage or transport position rather than a secondary shooting position.
 
Because the stock folds to the left, you should also check the clearance around your particular rifle. Depending on the configuration, the folded stock may come into contact with gauges, cocking arms or other controls positioned on the left-hand side of the gun.
 
The adapter includes a dedicated set of screws for installation. These screws must be used instead of the original stock screws. The supplied screws account for the additional thickness of the folding adapter, and using the existing screws can result in damage to the rifle or stock assembly.
 
Fitting the adapter also increases the overall length of pull by approximately 50 mm, so this should be taken into consideration before installation.
 
Installation is relatively straightforward but is not a job for a blunt instrument and a bad attitude. A reasonable level of mechanical competence, some mechanical sympathy and a suitable hex key/tool set are required. Take your time during installation and do not force components or fasteners.
 
Key Features
Converts the BuckRail MOD Stock (R-1) to a folding configuration
Allows the stock to fold to the left-hand side
Designed specifically for the BuckRail R-1 stock
Compatible with standalone R-1 stock configurations
Compatible with BuckRail DRS Tactical Stock setups
Suitable for the R-1 fitted to the FX DRS Tactical
Locking button secures the stock in the open position
Supplied with dedicated installation screws
Increases length of pull by approximately 50 mm
Compact folding solution for storage and transport
 
Important Installation Notes
Use only the screws supplied with the folding adapter.
Do not reuse the original R-1 stock screws, as the incorrect screw length can cause damage.
The stock does not lock in the folded position.
Check clearance around gauges, cocking arms and other controls on the left side of your rifle.
Fitting the adapter increases length of pull by approximately 50 mm.
Installation requires a suitable hex tool set and a reasonable level of mechanical competence.
Do not force screws or components during installation.
 
Compatibility
BuckRail MOD Stock (R-1)
BuckRail R-1 standalone stock
BuckRail DRS Tactical Stock conversion
FX DRS Tactical fitted with the BuckRail R-1 stock 
 
Please check your existing stock configuration before ordering. This adapter is designed for the BuckRail MOD Stock (R-1) only and does not include the stock itself!

Similar listings