Achtung: Your browser is outdated. Please note that Gunfinder may not work properly in some places. You should update your browser as soon as possible. Learn more here!

Atlas Bipod BT81 Lil Brandi

≈ $80
Price at the dealer: £60.45. Converted at the ECB rate as of November 16, 2026.
No permit required (18+)
DE14 1LJ Burton upon Trent, United Kingdom
0
ID: 11964193
Purchase from outside the EU: The firearm goes through an importer in your country, the dealer handles the export. How buying from Europe works
Shop safely with Gunfinder
Our AI-powered seller identity verification makes Gunfinder the safest marketplace online. Learn more
About the seller
Livens
Dealer

Details

Category
Condition
New
Location
🇬🇧 DE14 1LJ Burton upon Trent, United Kingdom
Availability
In stock

Freshness

This listing is based on a mirrored offer, where the listing data was synced to us from a shop, dealer, or external marketplace. Please note that temporary price discrepancies may occur due to possible delays in data transmission.
Source
Livens
Last checked with the dealer
about 14 hours ago

Description

Note: The item is located abroad. Please note that delivery conditions, shipping times, and/or the purchase process may differ.
Atlas Bipod BT81 Lil Brandi

The Atlas Bipod BT81 Lil Brandi provides a solution for mounting a 1913 Picatinny Rail on a traditional rifle stock without the need for disassembly, drilling holes, or causing damage. Here are the key details and installation instructions:

Key Features:

Mounting Method: Attaches to the existing sling stud using a cross pin, set screw, and hex wrench.

Slots: Features 3 usable slots for attaching any rail-mounted Atlas Bipod.

Sling Attachment: Equipped with a sling attachment for optional sling use.

Contact with Stock: Angular wings with rubber pads ensure secure contact with the stock.

Material: Machined from 7075-T6 aluminum to Picatinny rail standards.

Finish: Mil-Spec Type III Class 2 finish for durability.

Installation: No disassembly required. Patent Pending.

Compatibility: Not intended for use with flat stocks; suitable for traditional rifle stocks.

Dimensions and Weight:

Dimensions: 1.95 x 1.5 x 0.663 inches

Weight: 0.89 ounces

Installation Instructions (BT81):

Ensure the firearm is not loaded.

Verify that the sling stud is tight in the stock.

(Optional) Consider removing the sling stud, applying epoxy to threads, replacing, and tightening as per epoxy instructions.

Check the BT81 fit to the stock by placing it over the front sling stud with the smooth face towards the muzzle. Verify if the rubber pads are contacting the stock. Add additional rubber material if needed.

Do not use the BT81 if the rubber pads do not contact the stock, as it may cause damage.

Remove the BT81 and place the included 1/8 x 1/2” dowel pin into the rifle’s sling stud hole.

Carefully place the BT81 back onto the stock with the smooth face towards the muzzle, aligning the ends of the dowel pin with the .530 circular relief hole.

Press the BT81 against the stock and pull it down towards the buttstock. The dowel pin should engage the angular slot in the BT81 body.

Tighten the installed dog-tipped set screw with the included hex wrench to snug the BT81 to the rifle stock. Check tension regularly and avoid over-tightening.

Verify the BT81 is tight before each use, as settling might occur. Retighten as needed.

To remove the BT81, remove the set screw completely. Then, with a soft blow, non-marring mallet, gently tap on the end closest to the buttstock, moving it towards the muzzle.

The BT81 Lil’ Brandi offers a practical and secure solution for adding a Picatinny Rail to traditional rifle stocks with minimal installation effort and without compromising the stock’s integrity.

Similar listings