Kore - B2 Battle belt - Black
≈ $230
Price at the dealer: 2,299 kr. Converted at the ECB rate as of November 12, 2026.
No permit required (18+)
254 64 Helsingborg, Sweden
0
ID: 11608861
Purchase from outside the EU: The firearm goes through an importer in your country, the dealer handles the export.
How buying from Europe works
Shop safely with Gunfinder
Our AI-powered seller identity verification makes Gunfinder the safest marketplace online.
Learn more
Details
- Original language
- Swedish
- Category
- Condition
- New
- Location
- 🇸🇪 254 64 Helsingborg, Sweden
- Availability
- In stock
Freshness
This listing is based on a mirrored offer, where the listing data was synced to us from a shop, dealer, or external marketplace. Please note that temporary price discrepancies may occur due to possible delays in data transmission.
- Source
- RangeMaster Store
- Last checked with the dealer
- 3 days ago
Description
Note:
The item is located abroad. Please note that delivery conditions, shipping times, and/or the purchase process may differ.
Includes: B2 Buckle & Ranger Green Battle Belt (1.75"), Inner Velcro Liner Belt (1.5"), 1 Tip Keeper, Measuring Tape, Hex Wrench & Set Screws. This is a complete battle belt kit.Belt Width / Thickness: 1.5” / 5mm
Introducing the World's First Micro Adjustable Battle belt. Kore Battle belts use a hidden track with 20+ sizing points to adjust in small ¼” increments. Now you can loosen your belt 1/2" after a large meal, or tighten it as much as humanly possible, to securely hold up all your gear when needed. And best of all you can adjust while - sitting, walking, running, swimming or even crawling thru the trenches. No more having to remove or undo your belt buckle to make an adjustment. Simply put, this is the best fitting, most durable battle belt you’ll ever wear.
Outer Battle Belt is Nylon Web flanked by two rows of Molles, a Super-Fiber inner lining & proprietary Reinforced Power-Core™ center. The Inner Velcro Liner belt is nylon web & feeds thru belt loops to hold up your pants & support the weight of the outer Battle belt. The 2 belt system works in unison to adjust the belt's size - in and out - and they must be used together.
Belt Width / Thickness: 1.75” / 7mm
Load Rating: 20 lbs. / Up to 20 lbs. / Full-Size Firearms, Magazine Pouches, Dump Pouches, Trauma Kits, etc..
Size Range: Fits 24" - 48"
Buckle Material/ Finish: Zinc Alloy / Powder-Coat
Buckle Size / Weight: 2” x 2.5” / 5.5 oz.
Adjustable Track: Provides Over 20 - ¼” Size Positions
Belt Reinforcement: Power-Core™ Center for Added Stiffness and Support; Virtually Indestructible, Nylon Web Outer / 2 Rows of MOLLE, Reinforced Power-Core™ Center
Belt Material: Super Fiber Inner
Belt Keeper: Included
To trim your 1.5" Gun Belt or 1.75" Garrison Gun Belt to size, follow the instructions below.
1. On the back of the belt, use the ruler markings to find your pant size.
2. Add 4 inches for OWB carry, or 6 inches for IWB carry to your pant size. Cut on the mark using a sharp pair of scissors.
For Example: If your pant size is 34" - cut the belt at the 38" mark for OWB carry, or 40" for IWB carry.
If your pant size is close to the maximum size marking DO NOT CUT. Try the belt on first, then trim accordingly.
3. Loosen the 2 set screws on the back of the buckle with included wrench. Insert the cut end of the belt into the receptacle with teeth.
4. Clamp teeth down firmly and gently tighten the 2 set screws on the back of the buckle until they sit flush. Use caution to ensure the set screws are not overtightened or stripped. DO NOT TIGHTEN SET SCREWS UNTIL THE TEETH ARE FULLY CLAMPED DOWN.
5. Feed belt around waist (L to R), through the buckle and click until snug.
The tip of the belt should extend around 3 inches beyond your first belt loop.
