Note:
The item is located abroad. Please note that delivery conditions, shipping times, and/or the purchase process may differ.
The original Blaser saddle mount revolutionized the connection between the firearm and the scope. Its consistent accuracy, reliability, and precision are legendary and unmatched. Once zeroed, the scope can be removed and replaced in just three steps without any tools, whenever you want, with a 100% return to zero. This allows you to use different scopes on the same barrel. Four barely visible notches at the end of the cartridge chamber accommodate the one-piece mount without any tension. The barrel itself is completely free to float. No other modifications to the firearm are necessary, and there is no need for large mounting bases that can interfere with the sight picture or the firearm’s appearance.
MOUNTING:
1. Insert the Blaser Saddle Mount into the barrel notches with the locking levers open.
2. No tools are needed to press the locking levers into position. This releases the mounting clamp tension on the barrel. To prevent the locking levers from interfering with firearm use, they fold inward.
3. The scope is correctly positioned and ready for zeroing. The Blaser saddle mount can be removed and replaced as often as you want without needing to re-zero.
(Show description in original language)
L'originale attacco a sella Blaser ha rivoluzionato il collegamento tra l'arma e il cannocchiale. La sua costante accuratezza, affidabilità e precisione sono leggendarie e ineguagliabili. Dopo essere stato azzerato una volta, il cannocchiale può essere rimosso e sostituito in soli tre passaggi senza bisogno di attrezzi, tutte le volte che lo si desidera, con un ritorno allo zero del 100%. Ciò consente di utilizzare diversi cannocchiali sulla stessa canna. Quattro intagli poco visibili sull'estremità della camera di cartuccia accolgono l'attacco monopezzo senza alcuna tensione. La canna stessa è totalmente libera di oscillare. Non sono necessari altri interventi sull'arma e non c'è bisogno di grandi basi di montaggio che possono interferire con la visuale o con l'aspetto dell'arma.
MONTAGGIO:
1. Inserire il Blaser Saddle Mount nelle tacche della canna con le leve di bloccaggio aperte.
2. Non è necessario alcuno strumento per premere le leve di bloccaggio in posizione. In questo modo si rilascia la tensione del blocco della montatura sulla canna. Per evitare che le leve di bloccaggio interferiscano con l'uso dell'arma, sono ripiegate verso l'interno.
3. Il cannocchiale è posizionato correttamente e pronto per l'azzeramento. L'attacco a sella Blaser può essere rimosso e sostituito tutte le volte che si desidera, senza bisogno di azzerare nuovamente.