Note:
The item is located abroad. Please note that delivery conditions, shipping times, and/or the purchase process may differ.
NEO-X is designed for those looking for the best front rest for precision shooting. It combines the winning features of previous models: NEO’s quick height adjustment, the MINI-X’s light weight and compact size, the MAX’s extra-wide base, plus innovative new features.
This model is clearly different from the standard NEO. Most components are new and not compatible with previous models (NEO/MINI/MAX). Only the top, bag, stop and joystick from the NEO-X can also be used with the NEO/MINI/MAX.
The rest ships in compact mode, with the legs folded. The leveling screws can be quickly removed and reinstalled thanks to a removable insert.
In compact mode, it measures 15 cm thick, 35 cm wide and 27 cm high, with the carry handle on top. With the legs fully extended, the base provides a wide footprint of 42 cm from side to side and 37 cm from front to back (CTC = center to center of the leveling screws).
The NEO-X weighs approximately 8.4 kg, complete with joystick, handle and driver.
The rest ships with the front bag empty, ready to be filled with sand. The type of sand may vary depending on your location; use whichever you think is best for you.
Warnings
Read the manual before use.
Do not change the initial settings unless necessary.
Use the included cover to protect the rest from heat or dust.
Keep the rest clean after use and store it in a safe place to prevent damage.
Note: Before use, rotate the joystick two or three full turns and move it in quick circles to release the initial friction in the bearings.
Features
The top can rotate 360 degrees, accommodate a front end up to 15 cm wide, and be quickly and securely locked from either side.
The new front bags can be changed quickly and are easier to install, with no screws or tools required.
Folding, self-locking legs for compact storage. An innovative “insert nut” (#9) lets you quickly and securely remove and install the leveling screws.
The following configuration has the elevation knob on the left side and a single leg at the front, facing the target, suitable for right-handed shooters.
The NEO-X has a new, more refined internal mechanism that provides extra-smooth joystick action. Tension adjustment is also easier.
Greater joystick travel. It will also cover air rifle and rimfire rifle targets.
The lowest setting is 5.3″; the highest setting can be over 12″. Measured from the bottom of the base to the top of the front bag that the stock slides on.
Equipped with a carry handle on top. The joystick and driver attach to the carry handle (with a pair of clip-on Delrin pieces) for more organized storage. This also reduces the risk of losing or forgetting to bring either handle. It is also safer to carry the rest because the tips of the leveling screws point toward the ground. When rotated toward the shooter’s side (either side), it can be used as a cartridge holder, tablet holder or spotting scope holder, with a small modification or extension.
A hex bit screwdriver lets the user turn the handwheel and raise or lower the top from a distance, allowing quick elevation adjustment without having to reach for the front footrest.
The rest can be reversed, with one leg facing forward toward the target or toward the shooter’s side.
The joystick can be used in normal mode (up to raise, etc.) or reverse mode (up to lower, etc.).
The NEO-X is available in Raw (mill/polish finish), A
ll Black, All Blue, All Red or a combination of Blue-Black, Red-Black, Orange Gold-Black. Some components remain in a raw/polished finish.
Small bubble levels have been added to the top/side plates, and a circular bubble level is also positioned in the center of the base. These bubble levels are only intended to help level the base/support. The sand in the front bag may shift while shooting, and the bubble level on the rifle/scope may not match the bubble levels on the support. Please trust the bubble level on the rifle/scope rather than those on the support.
WARNING: The product color photos are for illustrative purposes only and may not reflect the color of the selected product.
(Show description in original language)
NEO-X è progettato per chi cerca il miglior supporto anteriore per il tiro di precisione. Combina le caratteristiche vincenti dei precedenti modelli: la regolazione rapida dell'altezza del NEO, la leggerezza e la compattezza del MINI-X, la base extra-larga del MAX, oltre a nuove funzionalità innovative.
Questo modello si distingue nettamente dal NEO standard. La maggior parte dei componenti è nuova e non compatibile con i modelli precedenti (NEO/MINI/MAX). Solo la parte superiore, la borsa, il fermo e il joystick del NEO-X possono essere utilizzati anche su NEO/MINI/MAX.
Il supporto viene spedito in modalità compatta, con le gambe piegate. Le viti di livellamento possono essere rimosse e reinstallate rapidamente grazie a un inserto removibile.
In modalità compatta, le misure sono 15 cm di spessore, 35 cm di larghezza e 27 cm di altezza, con la maniglia di trasporto sulla parte superiore. Quando le gambe sono completamente aperte, la base offre un’ampia superficie di 42 cm da lato a lato e 37 cm da fronte a retro (CTC = centro a centro delle viti di livellamento).
Il NEO-X pesa circa 8,4 kg, completo di joystick, maniglia e driver.
Il supporto viene spedito con la borsa anteriore vuota, da riempire con sabbia. La tipologia di sabbia può variare a seconda del luogo; utilizza quella che ritieni più adatta per te.
Avvertenze
Leggi il manuale prima dell'uso.
Non modificare le impostazioni iniziali se non necessario.
Usa il telo in dotazione per coprire il supporto in caso di caldo o polvere.
Mantieni pulito il supporto dopo l'uso e riponilo in un luogo sicuro per evitare danni.
Nota: Prima dell'uso, ruota il joystick per due o tre giri completi e muovilo in cerchi rapidi per rilasciare l'attrito iniziale nei cuscinetti.
Caratteristiche
La parte superiore può ruotare di 360 gradi, accettare un’estremità anteriore larga fino a 15 cm e può essere bloccata rapidamente e in modo sicuro da entrambi i lati.
Le nuove borse anteriori si cambiano rapidamente e sono più facili da installare, senza bisogno di viti o attrezzi.
Gambe pieghevoli e autobloccanti per un deposito compatto. C’è un innovativo “dado di inserimento” (#9) che consente di rimuovere e installare le viti di livellamento in modo rapido e sicuro.
La seguente configurazione prevede la manopola di elevazione sul lato sinistro e una gamba singola nella parte anteriore verso il bersaglio adatta ai destrorsi.
NEO-X ha un nuovo e più raffinato meccanismo interno che offre un’azione del joystick extra fluida. Anche la regolazione della tensione è più semplice.
Corsa del joystick più ampia. Coprirà anche i bersagli del fucile ad aria compressa e del fucile a percussione anulare.
L’impostazione più bassa è a 5,3″, l’impostazione più alta può essere superiore a 12″. Misurata dal fondo della base alla parte superiore della borsa anteriore su cui scorre il calcio.
Dotato di maniglia di trasporto sulla parte superiore. Il joystick e il driver sono fissati alla maniglia di trasporto (con un paio di Delrin a clip) per una conservazione più organizzata. Ciò riduce anche il rischio di perdere o dimenticare di portare entrambe le maniglie. È anche più sicuro trasportare il resto perché la punta finale delle viti di livellamento è rivolta verso il terreno. Quando è ruotato verso il lato del tiratore (entrambi i lati) può essere utilizzato come portacartucce, o come porta tablet, o come porta cannocchiale da osservazione, con una piccola modifica o estensione.
Un cacciavite a punta esagonale consente all’utente di ruotare il volantino e di sollevare e abbassare la parte superiore da lontano, consentendo una rapida regolazione dell’elevazione senza dover raggiungere il poggiapiedi anteriore.
L’appoggio può essere invertito, con una gamba rivolta in avanti verso il bersaglio o al lato del tiratore.
Il joystick può essere utilizzato in modalità normale (su per salire, ecc.) o in modalità inversa (su per scendere, ecc.).
Il NEO-X è disponibile in Raw (finitura mill/polish), All Black, All Blue, All Red o una combinazione di Blue-Black, Red-Black, Orange Gold-Black. Alcuni componenti rimangono in finitura grezza/polish.
Sono aggiunte piccole livelle a bolla sulle piastre superiori/laterali, una livella a bolla circolare è posizionata anche al centro della base. Queste livelle a bolla fungono solo da “aiuto” per livellare la base/il supporto. La sabbia nella borsa anteriore potrebbe spostarsi durante lo sparo e la livella a bolla sul fucile/cannocchiale potrebbe non corrispondere alle livelle a bolla sul supporto. Si prega di fidarsi della livella a bolla sul fucile/cannocchiale anziché di quelle sul supporto.
ATTENZIONE: Le foto dei colori del prodotto sono puramente illustrative, potrebbero non rispecchiare il colore del prodotto selezionato.