Note:
The item is located abroad. Please note that delivery conditions, shipping times, and/or the purchase process may differ.
for 24 g with low-volume powders
Our wads are made from top-quality material, specially treated by us with a percentage of a special additive to preserve their original elasticity over the years.
This is confirmed by examining our wads after firing or in cartridges loaded years ago.
They are tested at high pressure after being exposed to low temperatures.
The different heights are designed to provide the required case length for optimal crimping with the desired shot weights. They are self-adjusting, accommodating all combined heights during closure within the permitted millimeter range.
Important: the rod accompanying the wad in the case should apply only enough pressure to optimally settle the powder (for all types).
(Show description in original language)
per 24 g con polveri poco voluminose
Le nostre Borre sono fabbricate con materiale di prima qualità, da noi sottoposto a particolare trattamento con l’aggiunta di una percentuale di speciale additivo perché esse mantengano inalterata negli anni l’originale elasticità.
Questa affermazione trova conferma nell’esaminare le nostre Borre sparate o in cartucce caricate da anni.
Esse sono collaudate ad alta pressione, dopo averle sottoposte a bassa temperatura.
La diversità delle altezze è studiata per ottenere, con grammature di piombo volute, i millimetri di bossolo per consentire una ottimale orlatura; sono autoregolabili, per risolvere tutte le altezze combinate in fase di chiusura nell’ambito dei mm consentiti.
Importante: l’asta che accompagna la Borra nel Bossolo deve premere quanto basta esclusivamente per un ottimale assestamento della polvere (per tutti i tipi).