Note:
The item is located abroad. Please note that delivery conditions, shipping times, and/or the purchase process may differ.
Hasler Hunting Ariete Bullet .338 cal., 226 grn, CB 0.610 (30 pcs)
Pack of 30.
This line is designed for hunting. These bullets feature a specific HPBT design, with an outer structure identical to those designed for precision shooting.
Monolithic bullets made from high-quality copper alloy, offering exceptional consistency and ductility that make a difference both when shooting and on impact.
The new Ariete line is designed for hunting, although it is also excellent for precision shooting.
The only difference from the “Hunting” line is the terminal effect.
Ariete line bullets expand rather than fragment.
Ariete bullets require more frequent checks of the barrel’s copper fouling.
Double-section cavity to optimize the terminal effect.
The tips (polymer points) are supplied in a bag inside the package.
Simply insert the tip into the opening at the nose without applying too much pressure, using the guide. Turn the bullet so it points down onto a flat surface, then press on the base of the bullet. The tip will then be perfectly seated. You can use a non-metallic object to press on the base of the bullet, so you don’t strain your thumb. To prevent slipping, we recommend using a surface that isn’t too smooth (wood or hard rubber would be ideal), or placing a cloth or even just a paper magazine underneath. Alternatively, you can carefully use the press you use for reloading. Rest the bullet with the tip just inserted on the edge of the shell holder, then raise the ram until the tip touches the top of the press; very little pressure is needed to insert the tip. Be careful not to use too much force or deform the tip. You can also use a hammer with plastic faces, taking care to control the force.
(Show description in original language)
Hasler Hunting Ariete Ogiva cal. 338 da 226 grn CB 0,610 (30pz)
Confezione da 30 pezzi.
Questa linea è dedicata alla caccia. Si tratta di ogive dal disegno specifico HPBT, la cui struttura esterna è uguale a quelle dedicate al tiro di precisione.
Palle monolitiche in lega in Rame di livello qualitativo assoluto e offre un'omogeneità e una duttilità che fanno la differenza sia in fase di tiro sia in fase di impatto.
La nuova linea Ariete è progettata per la caccia, anche se è eccellente per il tiro di precisione.
La differenza con la linea "Hunting" consiste esclusivamente nell'effetto terminale.
Le palle della linea Ariete si affungano invece di frammentarsi.
Le palle ariete necessitano di un controllo più frequente del livello di ramatura della canna.
Foro a doppia sezione, per ottimizzare l'effetto terminale.
I tip (puntalini in polimero) vengono forniti in una busta all'interno della confezione.
È sufficiente inserire senza troppa pressione, il tip nel foro apicale grazie ad un invito; girare il proiettile puntandolo su una superficie piana, fare pressione sul fondo del proiettile stesso, il tip sarà così perfettamente collocato. Potete usare un oggetto non metallico per fare pressione sul fondo dell'ogiva, cosi da non affaticare il pollice. Per evitare scivolamenti, vi consigliamo di utilizzare un piano non troppo liscio (il legno o gomma dura sarebbero l'ideale), oppure di frapporre un panno o anche semplicemente una rivista di carta. In alternativa, facendo molta attenzione, potete adoperare la pressa usata per la ricarica. Appoggiando l'ogiva con il tip appena inserito, sul bordo dello shell holder si fa salire il pistone fino a far puntare il tip contro la parte superiore della pressa; basterà pochissima pressione per inserire il tip. attenzione a non usare troppa forza e a non deformare il tip stesso. Si può usare anche un martello con battenti in plastica, facendo però attenzione a dosare la forza.