Note:
The item is located abroad. Please note that delivery conditions, shipping times, and/or the purchase process may differ.
SP-4011 Ø34 H28mm 0MIL PIC
“The GAP Mount” Made at the request of George Gardner of GA Precision. Special mount with extra-low height. Due to its low height, it won’t work with scopes like the S&B 5-25 and 3-20, the Kahles k624i, or the Vortex Razor, as the erector housing will collide with the bridge between the rings. It works fine with Bushnells and the S&B 3-12×50 and 4-16×50. Aside from its low height, a special feature of this mount is an extra front clamping screw that allows the SP-4011 to be mounted partly forward—in a cantilever position—on the action’s Picatinny rail. This is especially useful on AR-type rifles and actions with integrated Picatinny rails, like Defiance, Surgeon, and Impact, where the rail isn’t long enough to provide the desired eye relief with some scopes. 0 MIL/0 MOA Height: 28 mm/1.102” Length: 121 mm/4.76” Weight: 231 g/8.1 oz 10-degree wedge included
(Show description in original language)
SP-4011 Ø34 H28mm 0MIL PIC
“The GAP Mount” Made on request from George Gardner of GA Precision. Special mount with extra low height. Due to the low height it will not work with scopes like S&B 5-25 and 3-20, the Kahles k624i, or Vortex Razor as the erector housing will collide with the bridge between the rings. It works fine with Bushnells and S&B 3-12×50 and 4-16×50. Aiside from the low height a special feature of this mount is an extra front clamping screw allowing the SP-4011 to be mounted partly forward – in a cantilever position – on the Picatinny rail of the action. This is especially useful on AR-type rifles and actions with integrated Picatinny rails like Defiance, Surgeon and Impact, where the rail isn’t sufficiently long for the desired eye-relief with some scopes. 0 MIL/0 MOA Height: 28 mm/1.102” Length: 121 mm/4.76” Weight: 231 g/8.1 oz 10-degree wedge included