Note:
The item is located abroad. Please note that delivery conditions, shipping times, and/or the purchase process may differ.
Optimized feeding box developed from years of experience. Developed by Dipl. Ing. Dieter Grimmig. The bottom of the box is raised about 15 mm compared to the lower edges of the side parts. This keeps the bottom dry and does not draw moisture from the ground. The short sides of the box are about 2 mm higher than the long sides. The resulting gaps ensure good ventilation of the feed and prevent mold formation. In addition, the feed emits a scent outside and is detected more quickly by wild boar. The bottom has 3 mm wide slots on the ends. This allows rainwater to always drain away. The lid is secured with strips on the underside. This prevents deer from simply pushing it off. Made from 15 mm thick, high-strength plywood panels, as used in vehicle construction. Durability: 10-15 years! Size: 30 x 25 x 11 cm. Interior dimensions: 22 x 27 x 8 cm. Weight: 3 kg.
(Show description in original language)
Durch langjährige Kirr-Erfahrung entstandene, optimierte Kirrkiste. Entwickelt von Dipl. Ing. Dieter Grimmig.Der Kastenboden ist gegenüber den Unterkanten der Seitenteile um ca. 15 mm erhöht. So bleibt der Boden trocken und zieht keine Feuchtigkeit vom Grund. Die Schmalseiten des Kastens sind ca. 2 mm höher als die Längsseiten. Dadurch entstandene Spalten sorgen für eine gute Belüftung des Kirrguts und verhindern Schimmelbildung. Außerdem duftet so das Kirrgut nach draußen und wird vom Schwarzwild schneller wahrgenommen.Im Boden befinden sich an den Stirnseiten 3 mm breite Schlitze. Dadurch kann Regenwasser immer ablaufen. Der Deckel ist an der Unterseite mit Leisten gesichert. So kann Rehwild ihn nicht einfach abschieben. Gefertigt aus 15 mm starken, hochfesten Siebdruckplatten, wie sie im Fahrzeugbau verwendet werden.Haltbarkeit: 10-15 Jahre! Größe: 30 x 25 x 11cm.Innenmaß: 22 x 27 x 8 cm. Gewicht: 3 kg.