Achtung: Your browser is outdated. Please note that Gunfinder may not work properly in some places. You should update your browser as soon as possible. Learn more here!
-10 %

Hawke Vantage HD 30 6-24X50 SF Scope | Mil Pro II

≈ $392 ≈ $353
Price at the dealer: £269. Converted at the ECB rate as of November 20, 2026.
No permit required (18+)
TS25 2FE Hartlepool, United Kingdom
0
ID: 12127359
Purchase from outside the EU: The firearm goes through an importer in your country, the dealer handles the export. How buying from Europe works
Shop safely with Gunfinder
Our AI-powered seller identity verification makes Gunfinder the safest marketplace online. Learn more
About the seller
Blackwood Outdoors
Dealer

Details

Category
Condition
New
Location
🇬🇧 TS25 2FE Hartlepool, United Kingdom
Availability
In stock

Freshness

This listing is based on a mirrored offer, where the listing data was synced to us from a shop, dealer, or external marketplace. Please note that temporary price discrepancies may occur due to possible delays in data transmission.
Source
Blackwood Outdoors
Last checked with the dealer
about 13 hours ago

Description

Note: The item is located abroad. Please note that delivery conditions, shipping times, and/or the purchase process may differ.
6–24× magnification and optical configuration

The Hawke Vantage HD 30 6-24×50 SF Scope uses a 50 mm objective lens and Hawke’s H2 optical system, with 11-layer fully multi-coated lenses. Its magnification range provides control over the amount of target detail visible through the scope, extending to a maximum setting of 24×.

Field of view is specified at 6.9–1.8 m at 100 m across the zoom range. This is relevant when selecting magnification around the target and the amount of surrounding area that needs to remain visible. Eye relief is 90 mm, while the stated exit pupil range is 8.3–2.1 mm.

Mil Pro II reticle calibrated at 20×

The Mil Pro II glass reticle is positioned in the second focal plane. Its specified calibration setting is 20×, which is the reference magnification for using the marked mil intervals as stated.

This configuration gives the shooter a defined magnification setting for measured reticle use within the scope’s wider zoom range. It is relevant when recording hold references or moving between magnification settings during a session.

Selectable red and green illumination provides control over the aiming point’s appearance against different backgrounds. A stepped rheostat offers five brightness levels, allowing illumination to be adjusted without changing the optical magnification. Power comes from a CR2032 battery.

MRAD turrets and return-to-zero reference

Elevation adjustment uses an exposed, resettable turret with a zero stop. The stop establishes a mechanical reference for returning to the chosen zero after dialling an elevation correction. The windage turret is exposed, locking and resettable, so its setting can be secured once the required adjustment has been made.

Both axes use 0.1 MRAD clicks, with 20 MRAD of specified elevation adjustment and 20 MRAD of windage adjustment. The turret units correspond with the reticle’s mil-based measurement system. At the reticle’s calibration setting, this provides a consistent angular reference for observing an offset and applying a correction.

Focus controls and 30 mm construction

Side focus covers parallax and focus adjustment from 9 m to infinity. This gives the scope a close-focus setting as well as adjustment for distant targets, with the control located on the side of the body. The fast-focus ocular provides a separate adjustment for reticle clarity.

A knurled Posi-Grip magnification ring accepts the supplied removable XL zoom throw lever. The larger contact point makes magnification changes easier to manage when wearing gloves.

The black monotube chassis has a 30 mm diameter. Overall length is 390 mm and weight is 745 g. The scope is nitrogen purged, waterproof, fog proof, shockproof and all calibre rated.

Specification
Details

Model code
14421

Barcode
5054492144211

Magnification
6–24×

Objective lens diameter
50 mm

Optical system
Hawke System H2

Lens coatings
Fully multi-coated, 11 layers

Focal plane
Second focal plane (SFP)

Reticle
Glass Mil Pro II

Reticle calibration magnification
20×

Illumination
Red and green; 5 brightness levels; stepped rheostat

Battery
CR2032

Parallax and focus adjustment
Side focus; 9 m to infinity (10 yards to infinity)

Field of view
6.9–1.8 m at 100 m

Angular field of view
4–1°

Apparent field of view
23.7–24°

Eye relief
90 mm (3.5 inches)

Exit pupil
8.3–2.1 mm

Ocular adjustment
Fast focus

Magnification control
Knurled Posi-Grip with removable zoom throw lever

Elevation turret
Exposed, resettable, zero stop

Windage turret
Exposed, locking, resettable

Click value
0.1 MRAD

Elevation adjustment
20 MRAD

Windage adjustment
20 MRAD

Chassis
30 mm monotube

Finish
Black

Overall length
390 mm

Weight
745 g

Environmental protection
Nitrogen purged; waterproof; fog proof; shockproof

Calibre rating
All calibre rated

Similar listings