Achtung: Your browser is outdated. Please note that Gunfinder may not work properly in some places. You should update your browser as soon as possible. Learn more here!

WULF 30mm Medium Weaver Rings

≈ $20
Price at the dealer: £15. Converted at the ECB rate as of November 20, 2026.
No permit required (18+)
TQ2 7TD Torquay, United Kingdom
0
ID: 12005160
Purchase from outside the EU: The firearm goes through an importer in your country, the dealer handles the export. How buying from Europe works
Shop safely with Gunfinder
Our AI-powered seller identity verification makes Gunfinder the safest marketplace online. Learn more
About the seller
TacticalScope
Dealer

Details

Category
Condition
New
Location
🇬🇧 TQ2 7TD Torquay, United Kingdom
Availability
In stock

Freshness

This listing is based on a mirrored offer, where the listing data was synced to us from a shop, dealer, or external marketplace. Please note that temporary price discrepancies may occur due to possible delays in data transmission.
Source
TacticalScope
Last checked with the dealer
4 days ago

Description

Note: The item is located abroad. Please note that delivery conditions, shipping times, and/or the purchase process may differ.
WULF 30mm medium weaver rings give you the perfect entry level solution for an affordable pair of rings to mount your 30mm rifle scope to your firearm.
Key specifications/Parameters -To avoid unnecessary returns please check off each of the following against your scope and rifle. If unsure on any factor please ask before buying. A) Ring Diameter: 30mm - Your scope must have a 30mm diameter tube. B) Base Fitting: Weaver/Picatinny. Horizontally slotted base that is 20-22mm wide at widest point.The mounts have cross bolts that fit into the grooves to ensure a rock solid fit.
This is an example of what a weaver/picatinny rail looks like:

C) Height: "Medium". These measure 9.4mm from base of mount to ring bottom. Do not go soley on the "medium" name as this varies and is often relatve to other mounts in a range. Height causes most returns. Simple guide to scope size suitability: Will suit most scopes with lens sizes upto 40mm. More accurate way - to approx. determine clearance of scope over flat base. 1) Measure your scopes outer objective (big end) diameter. This is NOT the lens diameter. e.g., scope is 3-9x40. The measure you need is not 40mm. It will be more than this as outer case thickness adds mm. 2) Divide by 2. Example: 48mm outer / 2 = 24.3) Deduct half scope tube diameter: 30mm so deduct 15 = 24 minus 15 = 9.4) Difference between this result and the mount rings measure is the clearance between scope and rifle body - where base is totally flat. In this example 0.4mm difference, so a very tight fit. However, as in the example image above, many/most weaver/picatinny bases are raised from the rifle body and scope objective may be hanging over more vertical room which gives more clearance. You will have to assess this based on your set up.If in doubt a) Ask us. b) Go to next height up. 
 
Here's a handy diagram. The BH=? is the base to ring bottom distance. 

 

Similar listings