Achtung: Your browser is outdated. Please note that Gunfinder may not work properly in some places. You should update your browser as soon as possible. Learn more here!

Pro Ferrum Gun Care Fluid Oil 100ml

≈ $14
Price at the dealer: £10.99. Converted at the ECB rate as of November 20, 2026.
No permit required (18+)
TW14 0TW Hounslow, United Kingdom
0
ID: 11968948
This item is currently unavailable.
Purchase from outside the EU: The firearm goes through an importer in your country, the dealer handles the export. How buying from Europe works
Shop safely with Gunfinder
Our AI-powered seller identity verification makes Gunfinder the safest marketplace online. Learn more
About the seller
Just Air Guns
Dealer

Details

Category
Condition
New
Location
🇬🇧 TW14 0TW Hounslow, United Kingdom
Availability
Out of stock

Freshness

This listing is based on a mirrored offer, where the listing data was synced to us from a shop, dealer, or external marketplace. Please note that temporary price discrepancies may occur due to possible delays in data transmission.
Source
Just Air Guns
Last checked with the dealer
about 4 hours ago

Description

Note: The item is located abroad. Please note that delivery conditions, shipping times, and/or the purchase process may differ.
PRO FERRUM GUN CARE FLUID OIL 100ML

Pro Ferrum is not a traditional oil – it is a new superfluid which serves as both a cleaner and lubricant that is suitable for use on air rifles. Pro Ferrum protects guns and prevents rust. It comes in three sizes, with the 50ml bottle ideal for taking out on shoot days while the larger sizes are stored at home. It is the only oil in the world that absorbs water. This wet drying ability means water is absorbed by oil even from the smallest cavities. Its ultra-fine formula is designed to adhere to sprayed surfaces leaving a protective film inside and outside of barrels and on actions. Better still it is completely safe to be used on wood and other materials too without damaging or affecting their finish. The lubricating properties of Pro Ferrum are such that it doesn’t bind with grit or sand to form abrasive compounds which could damage the workings of an air gun, and will break down old oil and grease deposits with ease.How it works

On wet surfaces the fluid encapsulates water; emulsifying it and removing it from surfaces it is applied to. The fluid itself is so fine it is superbly effective at penetrating and removing fouling and baked on residues in seconds. It neutralises acids from fingerprints and will dissolve the initial formation of rust and replace it with an anti-corrosion layer.

Product information

Pro Ferrum is not a traditional oil, it is a complex fluid. Complex fluids are based on a variety of active ingredients which form a complex molecular compound. This compound is outstandingly efficient in dissolving powder residue, encapsulating water, protecting and lubricating metal. Due to its rapid spreading properties Pro Ferrum penetrates and breaks up baked-on residues. Pro Ferrum neutralises acids from fingerprints, dissolves the initial formation of rust and replaces it with an anti-corrosion layer. All ingredients are gentle to the skin (Dermatest certified) and to other non-ferrous materials. Pro Ferrum prevents microbial attacks by natural plant extracts, but when mixed with water, it is readily biodegradable and environmentally friendly. Pro Ferrum does not contain silicone oils or fluoro-polymers. Such oils and agents should never be used on guns as they may damage the finish.

Spreading

Pro Ferrum is designed to spread out over surfaces and create a fine film similar to a superfluid: it forms a thin film and continues to creep over any surface and penetrate even the finest gaps. This is a significant difference to ordinary gun oils, which have limited penetrating properties requiring careful application to ensure all surfaces are covered.

Water-encapsulation

When sprayed on a wet surface, like on a barrel in the rain, Pro Ferrum, breaks down the water into tiny droplets and encapsulates them and a yellowish emulsion occurs. A second spray of Pro Ferrum replaces this emulsion with an oil film, which protects the metal from any further attacks of oxidation.Cleaning

Pro Ferrum has excellent cleaning properties. It penetrates and lifts undesired residues and protects the material underneath. Pro Ferrum dissolves rust quickly and as an indication, the colour of the fluid changes to orange. – Brass, Tombac and Lead: bullets leave a layer of residue in the barrel. Pro-Ferrum dissolves these metallic residues each time it is applied after shooting. As an indication, the colour of oil becomes green or grey.

Protection

– Iron and Steel four-stage effectiveness:

1. The first stage of effective metal protection is to clean the areas vulnerable to early corrosion. Blued finishes are especially prone to converting sweat, fingerprints or humidity into rust.

2. The second stage is to build up an active neutralising layer. Sweat and acids from powder residues are neutralised by Pro Ferrum.

3. The third stage is to block the rust-active spots by neutralising their electrochemical potential and by capturing free ions. Pro Ferrum covers these spots with hydrophobic, water-repellent working agents. The protection is intensified every time Pro Ferrum is applied.

4. The forth stage is the protection of the metal with a thin layer of oil, in order to prevent water and acids from coming into contact with the metal surface.

– Copper, Brass and Bronze: Protecting these is not quite as important as with ferrous metals, however, avoiding them is key to maintaining the aesthetic of the metal. Pro Ferrum contains special anti-corrosion properties for these metals.

• Leather: Being skin friendly, Pro Ferrum does not damage leather like some traditional oils, in fact, it softens even brittle leather and recovers its flexibility.

• Wood: Pro Ferrum can be used in small quantities for wooden stocks. With a few drops onto a soft cloth, then applied to the stock, you will be rewarded with a refreshed, shiny appearance.

• Plastics: Plastics and polymers used for firearms are usually robust materials, but some plastics tend to degrade when exposed to UV-light. Pro Ferrum can reduce this ageing by providing a protective barrier and antioxidants.

Lubrication

Pro Ferrum lubricates all parts of a gun by forming a thin oil layer. This layer is sufficient for smooth operation but it will not bind grit or sand to form an abrasive compound.

SPECIFICATIONS

PRODUCT: Pro Ferrum Gun Care Fluid Oil

CAPACITY: 100ml

SKU: PF100

CATEGORY: Accessories

CATEGORY: Gun Maintenance

FUNCTION: cleaner and lubricant

SUITABILITY: air rifles

PROPERTY: protects guns

PROPERTY: prevents rust

PROPERTY: absorbs water

SUITABILITY: wood and other materials

PROPERTY: doesn’t bind with grit or sand

FUNCTION: breaks down old oil and grease deposits

ACTION: encapsulates water

ACTION: removes fouling and baked on residues

ACTION: neutralises acids from fingerprints

ACTION: dissolves initial formation of rust

ACTION: replaces rust with an anti-corrosion layer

Browse more Gun Maintenance, or check out our full range of Air Rifles and Air Pistols, with all the latest airguns at Just Air Guns.

Similar listings