Kore - G2 Buckle Garrison belt - Coyote
≈ $132
Price at the dealer: 1,299 kr. Converted at the ECB rate as of November 09, 2026.
No permit required (18+)
254 64 Helsingborg, Sweden
0
ID: 11608849
Purchase from outside the EU: The firearm goes through an importer in your country, the dealer handles the export.
How buying from Europe works
Shop safely with Gunfinder
Our AI-powered seller identity verification makes Gunfinder the safest marketplace online.
Learn more
Details
- Original language
- Swedish
- Category
- Condition
- New
- Location
- 🇸🇪 254 64 Helsingborg, Sweden
- Availability
- In stock
Freshness
This listing is based on a mirrored offer, where the listing data was synced to us from a shop, dealer, or external marketplace. Please note that temporary price discrepancies may occur due to possible delays in data transmission.
- Source
- RangeMaster Store
- Last checked with the dealer
- about 7 hours ago
Description
Note:
The item is located abroad. Please note that delivery conditions, shipping times, and/or the purchase process may differ.
Kore Reinforced Every Day Carry belts are the most adjustable, supportive, comfortable belt you will ever wear. They provide a precise, secure fit - so you get a smooth, fast draw every time.
Belt Width / Thickness: 1.5” / 5mm
Load Rating: Up to 10 lbs. / IWB, OWB or Appendix
Size Range: Fits 24" - 54"
Buckle Material/ Finish: Zinc Alloy / Powder-Coat
Buckle Size / Weight: 3.5” x 1.75” / 5 oz.
Adjustable Track: Provides over 40 - ¼” size positions
Belt Reinforcement: Power-Core™ Center for Added Stiffness and Support; Virtually Indestructible
Belt Material: Nylon / Super Fiber Inner
Belt Keeper: Included
To trim your 1.5" Gun Belt or 1.75" Garrison Gun Belt to size, follow the instructions below.
1. On the back of the belt, use the ruler markings to find your pant size.
2. Add 4 inches for OWB carry, or 6 inches for IWB carry to your pant size. Cut on the mark using a sharp pair of scissors.
For Example: If your pant size is 34" - cut the belt at the 38" mark for OWB carry, or 40" for IWB carry.
If your pant size is close to the maximum size marking DO NOT CUT. Try the belt on first, then trim accordingly.
3. Loosen the 2 set screws on the back of the buckle with included wrench. Insert the cut end of the belt into the receptacle with teeth.
4. Clamp teeth down firmly and gently tighten the 2 set screws on the back of the buckle until they sit flush. Use caution to ensure the set screws are not overtightened or stripped. DO NOT TIGHTEN SET SCREWS UNTIL THE TEETH ARE FULLY CLAMPED DOWN.
5. Feed belt around waist (L to R), through the buckle and click until snug.
The tip of the belt should extend around 3 inches beyond your first belt loop.
