Enhanced Bolt Assembly Group
≈ $273
Price at the dealer: 2,695 kr. Converted at the ECB rate as of November 06, 2026.
Purchase permit required
532 40 SKARA, Sweden
0
ID: 11606905
Purchase from outside the EU: The firearm goes through an importer in your country, the dealer handles the export.
How buying from Europe works
Shop safely with Gunfinder
Our AI-powered seller identity verification makes Gunfinder the safest marketplace online.
Learn more
Details
- Original language
- Swedish
- Category
- Purchase eligibility
- Required
- Condition
- New
- Location
- 🇸🇪 532 40 SKARA, Sweden
- Availability
- In stock
Freshness
This listing is based on a mirrored offer, where the listing data was synced to us from a shop, dealer, or external marketplace. Please note that temporary price discrepancies may occur due to possible delays in data transmission.
- Source
- Astro Sweden
- Last checked with the dealer
- 3 days ago
Description
Note:
The item is located abroad. Please note that delivery conditions, shipping times, and/or the purchase process may differ.
The truth is, the standard Mil-spec 8620 bolt has a number of factors limiting its performance, not the least of which is that the life expectancy of such bolts is only about 6,000 rounds. In fact, standard bolts will start to show stress cracks on the locking lugs adjacent to the extractor cut after only 3,000 rounds. Cracking at the cam pin hole and weak extractor spring tension only add to the problems of the Mil-spec bolt.
Typical bolt failure mode next to extractor cut.
The material used in these standard bolts is also not the best choice by today's standards, but if you remember the old story that explains why “Mil-spec never dies,” that applies here as well; they make them this way because they’ve always made them this way.
The latest edition JP EnhancedBolt™ is made from SAE 9310 high-grade steel. This material makes for an extremely hard surface with a tough, ductile core resistant to structural failure and a life expectancy far exceeding Mil-spec 8620-type bolts. SAE 9310 is the same type of steel used in the transmission gears of Formula One racecars, and the high-load application of a bolt assembly is ideal for this state-of-the-art material; the results of actual full-auto endurance torture tests prove it.
The design of the JP EnhancedBolt™ addresses many other fine points, the most important of which is the utilization of a standard configuration extractor. Most users want the ability to replace extractors and other parts with commonly available Mil-spec parts instead of being dependent on proprietary parts that can be difficult to acquire. Therefore, this new bolt will accept standard extractors, pins and springs.
The JP EnhancedBolt™ will now be standard equipment on all JP .223 and .308 rifles and uppers, and we highly recommend it as a complement to your JP High Performance Bolt Carriers or any rifle system. The .223 version of the bolt is compatible with any AR-15 platform using a Mil-spec bolt carrier and subcomponents. The .308 version is compatible with the JP LRP-07 and the DPMS LR-308 platforms (or clones thereof) only and cannot be used to replace bolts in the Armalite AR-10 platform (or clones thereof).
LICENSPLIKTIG
Artikelattribut
Exkludera från marknadsföring Ja Varumärke JP Lagerprofil 2 Godkänd för jakt Nej
