Warne 20 MOA rail Tikka t3,t3x
≈ $183
Price at the dealer: 1,795 kr. Converted at the ECB rate as of November 03, 2026.
No permit required (18+)
111 22 Stockholm, Sweden
0
ID: 11571385
Purchase from outside the EU: The firearm goes through an importer in your country, the dealer handles the export.
How buying from Europe works
Shop safely with Gunfinder
Our AI-powered seller identity verification makes Gunfinder the safest marketplace online.
Learn more
Details
- Original language
- Swedish
- Brand
- Tikka
- Product
- Tikka T3
- Category
- Condition
- New
- Location
- 111 22 Stockholm, Sweden
- Availability
- In stock
Freshness
This listing is based on a mirrored offer, where the listing data was synced to us from a shop, dealer, or external marketplace. Please note that temporary price discrepancies may occur due to possible delays in data transmission.
- Source
- Walter Borg
- Last updated
- about 4 hours ago
Description
Note:
The item is located abroad. Please note that delivery conditions, shipping times, and/or the purchase process may differ.
Description
Maxima M6T3-20MOA Tikka T3 1 Piece 20MOA
Machined from solid steel in both standard and 20 MOA configurations, Warne Tactical Rails are designed around the Mil-Spec Picatinny style rail system and provide a strong and true platform for optics mounting.
Warne Tactical Rails allow the use of Picatinny or standard Weaver style rings.
Constructed of solid steel and machined in both standard and 20MOA configurations, matte black only.
Cross slots feature the 1913 Mil-Spec design.
Bases securely mount to your gun with T-15 Torx style screws, 25 in/lb. of torque recommended.
Visually inspect your firearm's receiver for burrs around the screw holes and remove if necessary. Remove all oil and grease from the holes in the receiver, the base screws and contact surfaces. Place the scope mount base(s) on the receiver. Check for proper fit and alignment. Using a T-15 wrench (supplied with WARNE rings) loosely install the supplied Torx 15 screws. If base(s) fit properly, firmly tighten screws.* WARNE recommends 25 in/lb torque. *WARNE recommends the use of a REMOVABLE thread locking compound for best results.
