MDT – .308/6.5 Creedmoor MDT Metal AICS Magazine
≈ $99
Price at the dealer: 89.11 €. Converted at the ECB rate as of November 06, 2026.
No permit required (18+)
25710 Vreta, Finland
0
ID: 11470338
Purchase from outside the EU: The firearm goes through an importer in your country, the dealer handles the export.
How buying from Europe works
Shop safely with Gunfinder
Our AI-powered seller identity verification makes Gunfinder the safest marketplace online.
Learn more
Details
- Category
- Condition
- New
- Location
- 🇫🇮 25710 Vreta, Finland
- Availability
- In stock
Freshness
This listing is based on a mirrored offer, where the listing data was synced to us from a shop, dealer, or external marketplace. Please note that temporary price discrepancies may occur due to possible delays in data transmission.
- Source
- MILDOT Finland
- Last checked with the dealer
- about 18 hours ago
Description
Note:
The item is located abroad. Please note that delivery conditions, shipping times, and/or the purchase process may differ.
SPECIFICATIONS
3.055” Outside Length
with binder plate 2.870” max cartridge overall length (COAL)
without binder plate 2.960” max cartridge overall length (COAL) OBSERVE, this version only on special order. (see limitations below)
4.61” Rear Height
COMPATIBILITY
These magazines will need to be slightly modified to function with Howa 1500 SA rifles.
308WIN
6mm Creedmoor
243WIN
260 Rem
6.5 Creedmoor
7mm-08 Win
308/7.62×51 NATO
22 – 250 Rem (will work at a reduced capacity)
The magazines with front binder plates are compatible with all rifles equipped with AICS-pattern bottom metal or chassis systems. The binder plate holds the cartridges back from the front of the magazines and guides them past the bottom of the feed ramp. The maximum cartridge overall length (COAL) that will fit in this magazine is 2.870”.
The magazines without front binder plates (Observe, special order item) allow a maximum cartridge overall length of 2.960”. These are compatible with all AICS-pattern bottom metal and chassis systems, but most common actions such as Remington 700 and Savage 10/11 will require modifications to the receiver (i.e. notching out the bottom of the feed ramp) to prevent the bullet tips from catching on the bottom of the feed ramp.
