Note:
The item is located abroad. Please note that delivery conditions, shipping times, and/or the purchase process may differ.
Butler Creek “Flip-Open” lens covers have been popular with shooters for over 20 years. Butler Creek lens covers feature the quiet “Quiet Open” function, which lets the covers open quickly and silently. The lens covers also protect your scope from water. Butler Creek lens covers withstand extreme conditions (operating temperature: -40–+120 degrees). The lens covers are also suitable for left-handed shooters.
Objective (obj) means the front lens. Eyepiece (ocular) means the rear lens. In some cases, Butler Creek doesn’t offer a rear lens cover large enough, but you can also use a cover designed for the front lens on the eyepiece. Apart from the size range, the only difference between front and rear covers is the button that opens the rear cover.
Measuring instructions: Measure the outside diameter of your scope with calipers, or as accurately as possible with a ruler, for example. The lens covers stretch by about 0.5 mm, so choose the closest possible size. If you’re unsure between two sizes, choose the larger one. You can always make a larger cover smaller by putting a piece of electrical tape, for example, on the inside of the cover.
(Show description in original language)
Butler Creek “Flip-Open” -linssinsuojat ovat olleet ampujien suosiossa jo yli 20 vuotta. Butler Creekin linssinsuojissa on hiljainen “Quiet Open” -toiminto, jonka avulla suojukset aukeavat nopeasti ja äänettömästi. Linssinsuojat suojaavat kiikariasi myös vedeltä. Butler & Creek -linssinsuojat kestävät ääriolosuhteissa (käyttölämpötila -40–+120 astetta). Linssinsuojat sopivat hyvin myös vasenkätisille ampujille. Objektiivi (obj) tarkoittaa etulinssiä Okulaari (okul) tarkoittaa takalinssiä Joissakin tapauksissa Butler Creekiltä ei löydy riittävän isoa takalinssille tarkoitettua linssinsuojaa, mutta voit hyvin käyttää okulaaripäässä myös etulinssille tarkoitettua suojaa. Etu- ja takapään suojat erottaa toisistaan kokovalikoiman lisäksi ainoastaan takapään suojan avaava painonappi. Mittausohje: Mittaa kiikarin ulkohalkaisija työntömitalla, tai mahdollisimman tarkasti esimerkiksi viivoittimella. Linssinsuojat venyvät järkevästi noin 0,5mm, joten valitse mahdollisimman tarkkaan oikea koko. Jos valinta arveluttaa kahden koon välillä, ota mielummin isompi. Isompaa suojaa saa aina pienennettyä laittamalla esimerkiksi palan sähköteippiä suojan sisäpintaan.