Note:
The item is located abroad. Please note that delivery conditions, shipping times, and/or the purchase process may differ.
Toni System Magazine Funnel for the CZ Shadow 2
This magazine funnel from Toni System makes reloading your CZ Shadow 2 pistol much easier. By enlarging the magazine well, it allows for more margin of error when the magazine is not inserted 100% correctly and straight. This logically also increases the speed of the hand movement from the magazine holster to the magazine well. And on top of that, such a magazine funnel also visually upgrades your Shadow 2!
The CZ Shadow 2 with the Toni System magazine funnel installed still fits easily into the IPSC Standard Box.
Almost a must-have part when it comes to tuning your CZ Shadow 2 to be fit for the IPSC Standard Division!
But also suitable for hobby shooters who simply want to get the maximum out of their Shadow 2 and enjoy tuning!
Fits all CZ Shadow 2 as well as CZ Shadow 2 Orange models!*
WARNING:
TO USE THE MAGAZINE FUNNEL, SHORT GRIP PANELS AND ALUMINUM MAGAZINE BASES ARE REQUIRED!
For example, the 3D Short Grip Panels combined with the +1.5 magazine bases.
*In about 10% of cases, it may happen that the magazine funnel fits only with difficulty or not at all onto the frame. However, this is not due to the magazine funnel itself, as all units are manufactured precisely and uniformly.
The cause lies in varying coating thicknesses of the frame, which can differ depending on the production batch at CZ. In rare cases, the frame may be slightly thicker, so the magazine funnel cannot be mounted without adjustment.
In such cases, it may be necessary to carefully polish or sand the affected area of the frame.
OEM Part Numbers:
MCZ2-BK (Black)
MCZ2-SI (Silver)
MCZ2-BL (Blue)
MCZ2-RE (Red)
MCZ2-OR (Orange)
MCZ2-SA (Sand)
(Show description in original language)
Toni System Magazintrichter für die CZ Shadow 2
Dieser Magazintrichter von Toni System erleichtert das Nachladen Ihrer CZ Shadow 2 Pistole deutlich. Durch die Vergrößerung des Magazinschachts werden mehr Fehler verziehen, wenn man das Magazin mal nicht 100% korrekt und gerade nachlädt. Dadurch kann man logischerweise auch die Geschwindigkeit, was die Handbewegung vom Magazinholster zum Magazinschacht betrifft, erhöhen. Und nebenbei wertet ein solcher Magazintrichter Ihre Shadow 2 auch noch optisch auf!
Die CZ Shadow 2 mit montiertem Magazintrichter von Toni System passt auch noch problemlos in die IPSC Standard Box.
Fast ein Pflichtteil, was das Tuning betrifft um Ihre CZ Shadow 2 für die IPSC Standard Division fit zu machen!
Aber auch für den Hobbyschützen geeignet, welcher einfach das Maximum aus seiner Shadow 2 rausholen will und einfach Spaß am Tuning hat!
Passend für alle CZ Shadow 2 sowie CZ Shadow 2 Orange Modelle!*
ACHTUNG:
UM DEN MAGAZINTRICHTER VERWENDEN ZU KÖNNEN WERDEN KURZE GRIFFSCHALEN UND ALUMINIUM MAGAZINBÖDEN BENÖTIGT!
Zum Beispiel die 3D Griffschalen Short in Kombination mit den +1,5 Magazinböden.
*In etwa 10 % der Fälle kann es vorkommen, dass der Magazintrichter nur schwer oder gar nicht auf das Griffstück passt. Dies liegt jedoch nicht am Magazintrichter selbst, da alle Exemplare präzise und einheitlich gefertigt werden.
Die Ursache liegt in unterschiedlichen Beschichtungsstärken des Rahmens, die je nach Produktionscharge bei CZ variieren können. In seltenen Fällen kann der Rahmen dadurch minimal dicker ausfallen, sodass der Magazintrichter nicht ohne Anpassung montiert werden kann.
In solchen Fällen kann es erforderlich sein, den betroffenen Bereich des Rahmens durch vorsichtiges Polieren oder Schleifen anzupassen.
OEM-Teilenummer:
MCZ2-BK (Schwarz)
MCZ2-SI (Silber)
MCZ2-BL (Blau)
MCZ2-RE (Rot)
MCZ2-OR (Orange)
MCZ2-SA (Sand)